Merit order adalah metode paling sederhana dalam economic dispatch yang dilakukan dengan mengurutkan pembangkit dari yang paling rendah sampai yang paling tinggi biaya operasinya. Pembangkit yang paling rendah biaya operasinya (Rp/MWh) dianggap sebagai pembangkit yang paling ekonomis. Penelitian ini membahas tentang perhitungan daya pada pembangkit dengan menggunakan metode merit order. Ada tiga pembangkit yang digunakan untu menyuplai beban sebesar 975 MW. Simulasi digunakan dengan memperhitungkan losses. Hasil menunjukkan bahwa merit order membantu dispatcher untuk mengambil keputusan lebih cepat. SOP merit order dibuat berdasarkan biaya operasi pembangkit sehingga harus selalu disesuaikan dengan harga bahan bakar terkini.
Merit order merupakan suatu metode yang digunakan dalam tahap economic dispatch. Metode ini merupakan metode yang paling sederhana, apabila dibandingkan dengan metode lain. Metode ini dilakukan dengan cara mengurutkan pembangkit dari yang paling murah hingga yang paling mahal berdasarkan biaya operasinya. Semakin rendah nilai biaya operasi (Rp/MWh) suatu pembangkit, maka dapat dikatakan pembangkit tersebut semakin ekonomis. Penelitian ini membahas mengenai penggunaan metode merit order untuk menghitung daya yang dibangkitkan pada masing-masing pembangkit. Terdapat tiga pembangkit yang digunakan untuk mencatu beban sebesar 975 MW. Simulasi digunakan dalam kondisi tanpa losses. Hasil menunjukkan bahwa merit order merupakan metode yang sederhana dan membantu dispatcher untuk mengambil keputusan lebih cepat. Kemudian SOP dari metode merit order dibuat berdasarkan biaya operasi pembangkit sehingga harus selalu di update sesuai perubahan harga bahan bakar.
Studi backward-facing step yang menggunakan turbulent model k- ε (RNG, Realizable) dengan standard wall functions. Sebuah bump ditempatkan di dekat posisi saluran masuk dalam bentuk setengah lingkaran. Studi dimulai dengan melakukan uji grid independency test tanpa menggunakan bump. Metode simulasi yang digunakan dalam studi ini adalah: jarak ketinggian (h): 14; variasi jarak bump (I / h): 2, 4; diameter melingkar (D): 14. Studi ini menggunakan bilangan Reynolds pada 38000 (v = 40.9 m/s). Hasil dari studi ini adalah membandingkan variasi model yang memiliki perbedaan jarak posisi bump dan beberapa model K-epsilon. Dengan tambahan bump setengah lingkaran maka reattachment length menjadi lebih pendek yang memiliki selisih sekitar 6 - 11% pada jarak bump I/h = 2 dan 34 - 42% untuk jarak bump I/h = 4 jika dibandingkan dengan reattachment length tanpa bump
Metode mengenai perpindahan panas terus mengalami perkembangan, untuk meningkatkan perpindahan banyak cara untuk mempercepat laju perpindahan panas, salah satunya dengan menggunakan media berpori dengan berbagai material, sehingga peneliti tertarik untuk mendalami bagaimana proses distribusi temperature yang terjadi pada silinder berpori dengan variasi porositas dengan disimulasikan menggunakan program computer. Kemudian Tujuan dari penelitian ini ialah untuk memperoleh distribusi koefisien temperature yang sedang terjadi pada silinder berpori dengan variasi porositas 0,1; 0,2; 0,3. Dari percobahaan dan pembahasan maka dapat ditarik kesimpulan ialah porositas pada silinder menunjukkan semakin besar porositas mengakibatkan K efektif menjadi kecil, dan nilai h (koefisien perpindahan panas) juga kecil.
Solar cell is a converter of light energy into electrical energy. This study aims to examine the characteristics of the solar cell to load variations. The research was conducted at the Semarang State Polytechnic Energy Conversion Lab. The solar cell used in the research of the monocrystalline solar cell type KTENG CP-520S. The research method is carried out by measuring the value of solar intensity, voltage and electric current from the solar cell, then calculating the value of the power and efficiency of the solar cell. The greater the intensity of sunlight, the better the characteristics of the solar cell with a note that the solar cell surface temperature must be stable at 250C. The results showed that the highest input power of the solar cell was 5293.69 watts at a lamp load of 115 watts at 833.6 W/m2 of radiation during sunny weather. The highest value of the output power of the solar cell is 191.52 watts when the lamp is loaded with 190 watts of radiation at 739.4 W/m2 during sunny weather. While the highest value of the load output power is 212.43 watts when the lamp is loaded with 200 watts of radiation at 724.4 W/m2 when the weather is sunny. The highest efficiency of the solar cell is 4.13% when the lamp is loaded with 200 watts of radiation at 724.4 W/m2 when the weather is sunny. And the highest value of Solar Power Plant efficiency is 4.61% at a 200 watt lamp loading at 724.4 W/m2 radiation when the weather is sunny.
<pre><strong><em>The use of solar power plants is now developing, for example aerator drives with the Internet of Things. The purpose of designing aerators with the Internet of Things is to utilize programming instructions that each command can generate interaction with fellow devices and connect automatically without user intervention, even remotely. This research method begins with the study of literature, manufacture, installation of components, as an analysis carried out testing and data collection. The results of the tests conducted on day 5 include, the best solar radiation intensity power of 886.786 W/m<sup>2</sup>, the power produced by solar cells of 473.099 W and aerator power of 75.843 W, solar panel efficiency of 14.749%. and PLTS system efficiency of 4.275%.</em></strong> <strong><em>In this test, it was found that the addition of aeration can increase oxygen concentration and pH value of water. </em></strong><strong><em></em></strong></pre><p><strong><em>Keywords- Aerator, PLTS, Performance </em></strong><strong><em></em></strong></p>
<p>Untuk mengatasi permasalahan kelangkaan bahan bakar fosil di sektor rumah tangga salah satunya adalah memanfaatkan bahan bakar yang bersumber dari biomassa. Keberadaan sumber daya alam Indonesia yang cukup melimpah memliki potensi untuk pengembangan bahan bakar biomassa. Pengembangan bahan bakar biomassa sebagai bahan bakar alternatif salah satunya adalah berupa briket bioarang. Penelitian ini bertujuan untuk mengkarakterisasi bahan bakar briket bioarang dari limbah potongan kayu, enceng gondok dan daun kering. Karakterisasi bahan bakar briket bioarang dilakukan melalui pengujian nilai kalor. Parameter pengujian<em> performance</em> <em>water boling </em> yang diukur antara lain adalah <em>time to boil. </em>Hasil Penelitian yang telah dilakukan dapat disimpulkan nilai kalor tertinggi pada sampel C dengan nilai kalor sebesar 5911,2 kal/g, sedangkan <em>time to boil</em> dengan waktu tercepat adalah pada sampel C dengan catatan waktu 21 menit 20 detik.</p><strong>Kata Kunci</strong> : <em><em>Bahan Bakar Alternatif, Briket Bioarang, Karakteristik Briket Bioarang, </em></em><em>Performance Water Boiling</em>
<p><em>This research was conducted to evaluate air conditioning systems in pharmaceutical warehouses against the ANSI/ASHRAE/ASHE ventilation standards 170 – 2008 and SNI-03-6572-2001. The method used is to calculate the cooling load on the FCU (Fan Coil Unit) using the CLTD (Cooling Load Temperature Difference) method and calculate the External Static Pressure on the ducting system. The analysis is carried out by comparing the results of calculating the FCU requirements with the actual specifications that have been implemented. Furthermore, the measurement results of the existing room air condition are compared with the standards for pharmaceutical warehouse applications. The calculation results show that the pharmaceutical warehouse has a cooling load of 47,472.72 Btu/hr, and has an external static pressure of 123 Pa. While the selected FCU (Fan Coil Unit) has a capacity of 78,771 Btu/hr and a maximum external static pressure of 130 Pa with a rated airflow of 4000 m3/hr. After 9 years of use, it is known that the rated airflow has decreased by around 37% of the FCU capacity. Existing room air conditions obtained the extreme temperature and RH of 23.36°C and 72%, respectively.</em></p><script id="stacks-wallet-provider" type="text/javascript" src="chrome-extension://ldinpeekobnhjjdofggfgjlcehhmanlj/inpage.js"></script><script id="stacks-wallet-provider" type="text/javascript" src="chrome-extension://ldinpeekobnhjjdofggfgjlcehhmanlj/inpage.js"></script><script id="stacks-wallet-provider" type="text/javascript" src="chrome-extension://ldinpeekobnhjjdofggfgjlcehhmanlj/inpage.js"></script><script id="stacks-wallet-provider" type="text/javascript" src="chrome-extension://ldinpeekobnhjjdofggfgjlcehhmanlj/inpage.js"></script><script id="stacks-wallet-provider" type="text/javascript" src="chrome-extension://ldinpeekobnhjjdofggfgjlcehhmanlj/inpage.js"></script><script id="stacks-wallet-provider" type="text/javascript" src="chrome-extension://ldinpeekobnhjjdofggfgjlcehhmanlj/inpage.js"></script><script id="stacks-wallet-provider" type="text/javascript" src="chrome-extension://ldinpeekobnhjjdofggfgjlcehhmanlj/inpage.js"></script>
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.