Palm kernel shell (PKS) core fibers, an agricultural waste, were chemically modified using N(3chloro2hydroxypropyl) trimethylammonium chloride (CHMAC) as a quaternizing agent. The potential of quaternized palm kernel shell (QPKS) as an adsorbent for fluoride in an aqueous solution was then studied. The quaternized palm kernel shell (QPKS) core fibers were characterized using Fourier transform infrared spectroscopy (FTIR) and a scanning electron microscope (SEM). The effect of various factors on the fluoride sequestration was also investigated. The results showed that with an increase in the adsorbent amount and contact time, the efficiency of fluoride removal was improved. The maximum fluoride uptake was obtained at pH 3 and a contact time of 4 h. The adsorption behavior was further investigated using equilibrium isotherms and kinetics studies. The results from these studies fit well into Freundlich, RedlichPeterson, and Sips isotherm's with a coefficient of determination (R2) of 0.9716. The maximum fluoride removal was 63%. For kinetics studies, the pseudo second order was the best fit for fluoride, with an R2 of 0.999. These results suggest that QPKS has the potential to serve as a lowcost adsorbent for fluoride removal from aqueous solutions.
In this research, the adsorption potential of quaternized palm kernel shell (QPKS) to remove F− from aqueous solution was investigated using fixed-bed adsorption column. Raw palm kernel shell waste was reacted with 3-chloro-2-hydroxypropyl trimethylammonium chloride (CHMAC) in order to modify the surface charge. The effects of inlet F− concentrations (2–12 mg/l) and QPKS bed height (2–10 cm) with optimum pH (pH = 3) on the breakthrough characteristics of the adsorption system were determined. In the fixed-bed column, breakthrough time increases with increasing bed height due to increasing amount of active site on adsorbents to adsorb the fluoride ion. Decreasing trend of breakthrough values was obtained with increasing initial fluoride concentration due to greater driving force for the transfer process to overcome the mass transfer resistance in the column. The adsorptions were fitted to three well-established fixed-bed adsorption models, namely, Thomas, Yoon–Nelson, and Adams–Bohart models. The results fitted well to the Thomas and Yoon–Nelson models with correlation coefficient, R2 ≥ 0.96.
It is known that synthetic polymer plays a big role in various applications. One of its potentials is to remove heavy metal ions through single batch adsorption. Adsorption behavior and mechanism of synthetic polymer are the two main focuses in this research. The synthetic polymer of Poly(AN-co-AA) has been successfully polymerized, modified with hydroxylamine hydrochloride and removed Cd 2+ and Pb 2+ . The poly(AN-co-AA) and amidoxime (AO) modified poly(AN-co-AA) were characterized by Fourier Transform Infrared Analysis (FTIR), microanalysis, Scanning Electron Microscopy (SEM) and Thermogravimetry (TGA). At pH 9, the percentage removal for Cd 2+ (90%) and Pb 2+ (98%) were the highest with adsorbent dosage at 4 gL −1 and 8 g L −1 , respectively. The experimental data for Cd 2+ (20 mg g −1 ) and Pb 2+ (125 mg g −1 ) were fitted well by Sips and Freundlich isotherms model, respectively. The adsorption rate for both Cd 2+ and Pb 2+ were stated by using Lagergren pseudo-first order.
A copper (Cu) foam was brazed with Cu-4.0Sn-9.9Ni-7.8P filler foil for joint strength and interface analysis. Brazed 50 pores per inch (PPI) Cu foam yielded a maximum compressive strength of 14.4 MPa with a 127% increment compared to nonbrazed Cu foam. 15 PPI Cu foam produced a maximum shear strength of 2.7 MPa. Scanning electron microscopy showed that the thickness of the brazed seam decreased with increasing the Cu foam's PPI. The formation of the Cu, Cu3P (P: phosphorus) and Ni3P (Ni: nickel) at the Cu/Cu foam interface was validated using energy-dispersive X-ray spectroscopy (EDX) and X-ray diffraction. EDX line scanning analysis revealed the diffusion of P and Ni into Cu foam, which took place via capillary force action.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.