Using the concept of insulator-based "electrodeless" dielectrophoresis, we present a novel geometry for shaping electric fields to achieve lateral deviation of particles in liquid flows. The field is generated by lateral planar metal electrodes and is guided along access channels to the active area in the main channel. The equipotential surfaces at the apertures of the access channels behave as vertical "liquid" electrodes injecting the current into the main channel. The field between a pair of adjacent liquid electrodes generates the lateral dielectrophoretic force necessary for particle manipulation. We use this force for high-speed deviation of particles. By adding a second pair of liquid electrodes, we focus a particle stream. The position of the focused stream can be swept across the channel by adjusting the ratio of the voltages applied to the two pairs. Based on conformal mapping, we provide an analytical model for estimating the potential at the liquid electrodes and the field distribution in the main channel. We show that the simulated particle trajectories agree with observations. Finally, we show that the model can be used to optimize the device geometry in different applications.

We present a particle-sorting device based on the opposition of dielectrophoretic forces. The forces are generated by an array of electrode chambers located in both sidewalls of a main flow channel. Particles with different dielectric response perceive different force magnitudes and are therefore continuously focused to different streamlines in the flow channel. We relate the particles' dielectric response to their output position in the downstream channel. We demonstrate the performance of the device by separating a mixed yeast cell population into pure fractions of viable and nonviable cells. Finally, we use the device to enrich red blood cells infected with Babesia bovis, a major pathogen in cattle and simultaneously confirm the hypothesis that infection with B. bovis causes significant changes in the dielectric response of red blood cells.

No abstract

There is great interest in highly sensitive separation methods capable of quickly isolating a particular cell type within a single manipulation step prior to their analysis. We present a cell sorting device based on the opposition of dielectrophoretic forces that discriminates between cell types according to their dielectric properties, such as the membrane permittivity and the cytoplasm conductivity. The forces are generated by an array of electrodes located in both sidewalls of a main flow channel. Cells with different dielectric responses perceive different force magnitudes and are, therefore, continuously focused to different equilibrium positions in the flow channel, thus avoiding the need of a specific cell labeling as discriminating factor. We relate the cells' dielectric response to their output position in the downstream channel. Using this microfluidic platform that integrates a method of continuous-flow cell separation based on multiple frequency dielectrophoresis, we succeeded in sorting viable from nonviable yeast with nearly 100% purity. The method also allowed to increase the infection rate of a cell culture up to 50% of parasitemia percentage, which facilitates the study of the parasite cycle. Finally, we prove the versatility of our device by synchronizing a yeast cell culture at a particular phase of the cell cycle avoiding the use of metabolic agents interfering with the cells' physiology.

We present a device capable of electrical cell lysis and evaluation of lysis efficiency in continuous flow using dielectrophoretic cell sorting. We use a combination of AC electrical fields and so-called liquid electrodes to avoid bubble creation at the electrode surface. The electrical field distribution is calculated in different electrode configurations by numerical simulations. Cell sorting shows high lysis efficiency, 99% of yeast cells sorted after lysis featuring dielectric properties similar to dead cells. A study of the potential device throughput is performed.

We present a microfluidic device where micro- and nanoparticles can be continuously functionalized in flow. This device relies on an element called "particle exchanger", which allows for particles to be taken from one medium and exposed to some reagent while minimizing mixing of the two liquids. In the exchanger, two liquids are brought in contact and particles are pushed from one to the other by the application of a dielectrophoretic force. We determined the maximum flow velocity at which all the particles are exchanged for a range of particle sizes. We also present a simple theory that accounts for the behaviour of the device when the particle size is scaled. Diffusion mixing in the exchanger is also evaluated. Finally, we demonstrate particle functionalization within the microfluidic device by coupling a fluorescent tag to avidin-modified 880 nm particles. The concept presented in this paper has been developed for synthesis of modified particles but is also applicable to on-chip bead-based chemistry or cellular biology.

Cell cycle synchronization is an important tool for the study of the cell division stages and signalling. It provides homogeneous cell cultures that are of importance to develop and improve processes such as protein synthesis and drug screening. The main approach today is the use of metabolic agents that block the cell cycle at a particular phase and accumulate cells at this phase, disturbing the cell physiology. We provide here a non-invasive and label-free continuous cell sorting technique to analyze and synchronize yeast cell division. By balancing opposing dielectrophoretic forces at multiple frequencies, we maximize sensitivity to the characteristic shape and internal structure changes occurring during the yeast cell cycle, allowing us to synchronize the culture in late anaphase.

Impedance spectroscopy is a powerful tool for label-free analysis and characterisation of living cells. In this work, we achieved the detection of Babesia bovis infected red blood cells using impedance spectroscopy on a microfabricated flow cytometer. The cellular modifications caused by the intracellular parasite result in a shift in impedance which can be measured dielectrically. Thus, a rapid cell-by-cell detection with microliter amounts of reagents is possible. Unlike other diagnostic tests, this method does not depend on extensive sample pre-treatment or expensive chemicals and equipment.