No abstract

No abstract

No abstract

FLiNaK (LiF-NaF-KF: 46?5-11?5-42 mol.-%) is a promising candidate as high temperature coolant for next generation nuclear reactor coolants. Major technical challenge in implementation is the selection of structural material that can withstand corrosive nature of FLiNaK. Corrosion study of different alloys such as SS-316L, SS-317L, Inconel-625, Incoloy-800H, Hastelloy-B and Ni-201 was performed in FLiNaK salt. The tests were carried out in the temperature range of 650-850uC in graphite crucibles for 60 h under inert atmosphere. Weight loss of the alloy sample due to corrosion was measured, and corrosion rate was estimated. The salt composition after corrosion was analysed by inductively coupled plasma spectroscopy coupled with atomic emission spectroscopy. The surface morphology of the alloy samples was analysed by scanning electron microscopy. Ni-201 and Hastelloy-B showed better resistance to corrosion than other alloys. Corrosion rate was found to increase with increase in Cr content in the alloy. List of symbolsA area of exposure, cm 2 C p specific heat, J kg 21 uC 21 t time of exposure, h T temperature, K W weight loss after corrosion, mg r density, kg m 23 r m density of the specimen, g cm 23

No abstract

No abstract

No abstract

No abstract