Electrohydrodynamic printing (EHDP) has attracted extensive interests as a powerful technology to fabricate micro- to nano-scale fibrous scaffolds in a custom-tailored manner for biomedical applications. A few synthetic biopolymer inks are applicable to this EHDP technology, but the fabricated scaffolds suffered from low mechanical strength, biocompatibility, and biodegradability. In this study, a series of poly(ε-caprolactone) (PCL)/zein composite inks were developed and their printability was examined on a solution-based EHDP system for scaffold fabrication. Multilayer grid scaffolds were manufactured by PCL, PCL/zein-10, and PCL/zein-20 inks, respectively and characterized. The mechanical strength of scaffolds printed by PCL/zein composite inks was remarkably enhanced in terms of Young's modulus and yield stress. The enzyme-accelerated in vitro degradation study demonstrated that zein-containing scaffolds exhibited dose-responsive improvement on the degradation rate as evidenced by surface morphological change of fibers. Moreover, the biocompatibility of PCL/zein scaffolds, tested on mice embryonic fibroblast (NIH/3T3) and human nonsmall lung cancer cell (H1299), manifested better cell affinity. Our findings suggest that scaffolds fabricated by the solution-based EHDP with PCL/zein composite inks can significantly improve Young's modulus, yield stress, biocompatibility, and biodegradability and have potential applications in drug delivery systems, 3D cell culture modeling, or tissue engineering.
Abstract:One of the important constituents in tissue engineering is scaffold, which provides structural support and suitable microenvironment for the cell attachment, growth and proliferation. To fabricate micro/nano structures for soft tissue repair and three-dimensional (3D) cell culture, the key is to improve fibre-based scaffold fabrication. Electrohydrodynamic (EHD) jetting is capable of producing and orientating submicron fibres for 3D scaffold fabrication. In this work, an EHD-jetting system was developed to explore the relationship between vital processing parameters and fibre characteristics. In this study, polycaprolactone (PCL) solution prepared by dissolving PCL pellets in acetic acid was used to fabricate the scaffolds. The influence of voltage, motorized stage speed, solution feed rate, and solution concentration on fibre characteristics and scaffold pattern were studied. Morphology of the EHD-jetted PCL fibres and scaffolds were analysed using optical microscope images and scanning electron microscope (SEM) images. Multi-layer scaffolds with the varied coiled pattern were fabricated and analysed. Cell attachment and proliferation have to be investigated in the future by further cell culture studies on these multi-layer coiled scaffolds.
Two diacenopentalene dicarboximides were synthesized, and their devices made with solution-processing technique exhibited n-type field-effect transistor behavior with electron mobility of up to 0.06 cm2 V−1 s−1.
Cultivating meat from muscle stem cells in vitro requires 3D edible scaffolds as the supporting matrix. Electrohydrodynamic (EHD) printing is an emerging 3D‐printing technology for fabricating ultrafine fibrous scaffolds with high precision microstructures for biomedical applications. However, edible EHD‐printed scaffolds remain scarce in cultured meat (CM) production partly due to special requirements with regard to the printability of ink. Here, hordein or secalin is mixed, which are cereal prolamins extracted from barley or rye, with zein to produce pure prolamin‐based inks, which exhibit favorable printability similar to common polycaprolactone ink. Zein/hordein and zein/secalin scaffolds with highly ordered tessellated structures are successfully fabricated after optimizing printing conditions. The prolamin scaffolds demonstrated good water stability and in vitro degradability due to the porous fiber surface, which is spontaneously generated by culturing muscle cells for 1 week. Moreover, mouse skeletal myoblasts (C2C12) and porcine skeletal muscle satellite cells (PSCs) can adhere and proliferate on the fibrous matrix, and a CM slice is produced by culturing PSCs on prolamin scaffolds with high tissue similarity. The upregulation of myogenic proteins shows that the differentiation process is triggered in the 3D culture, demonstrating the great potential of prolamin scaffolds in CM production.
Scaffold-based three-dimensional (3D) cell culture systems have gained increased interest in cell biology, tissue engineering, and drug screening fields as a replacement of twodimensional (2D) monolayer cell culture and as a way to provide biomimetic extracellular matrix environments. In this study, microscale fibrous scaffolds were fabricated via electrohydrodynamic printing, and nanoscale features were created on the fiber surface by simply leaching gliadin of poly(ε-caprolactone) (PCL)/ gliadin composites in ethanol solution. The microstructure of the printed scaffolds could be precisely controlled by printing parameters, and the surface nanotopography of the printed fiber could be tuned by varying the PCL/gliadin ratios. By seeding mouse embryonic fibroblast (NIH/3T3) cells and human nonsmall cell lung cancer (A549) cells on the printed scaffolds, the cellular responses showed that the fiber nanotopography on printed scaffolds efficiently favored cell adhesion, migration, proliferation, and tissue formation. Quantitative analysis of the transcript expression levels of A549 cells seeded on nanoporous scaffolds further revealed the upregulation of integrin-β1, focal adhesion kinase, Ki-67, E-cadherin, and epithelial growth factor receptors over what was observed in the cells grown on the pure PCL scaffold. Furthermore, a significant difference was found in the relevant biomarker expression on the developed scaffolds compared with that in the monolayer culture, demonstrating the potential of cancer cell-seeded scaffolds as 3D in vitro tumor models for cancer research and drug screening.
A pro-aromatic molecule BPT-TIPS displayed different ground-state electronic structure and physical properties from its anti-aromatic counterpart S2-TIPS.
Significant
progress has been made in fabricating porous scaffolds
with ultrafine fibers for tissue regeneration. However, the lack of
noninvasive tracking methods in vivo makes it impossible
to track the fate of such scaffolds in situ. The development of near-infrared
region II (NIR-II, 1000–1700 nm) dyes provides the possibility
of performing noninvasive visualization with deep-tissue penetration
and high spatial resolution in vivo. Herein, we developed
a polycaprolactone (PCL) ink containing the small organic NIR-II dye
SY-1030 and the fluorescently labeled macromolecular dye SY-COO-PCL
and fabricated high-resolution NIR-II active scaffolds via electrohydrodynamic jet (EHDJ) printing. All printed scaffolds subcutaneously
implanted in mice were clearly imaged one week after the operation.
Compared with scaffolds containing SY-1030, the fluorescence intensity
emitted from scaffolds containing SY-COO-PCL can be tracked for up
to three weeks. Moreover, the image quality can be optimized by adjusting
the dye concentration, laser power, and exposure time. The advantage
of such NIR-II active scaffolds is evidenced by the lower dye concentration,
longer tracking period, and better in vivo stability.
We also demonstrated the biocompatibility and biodegradability of
the scaffolds containing SY-COO-PCL over a 3-month period. The developed
NIR-II active scaffolds have potential applications in biopolymer
implant tracking, tissue reconstruction monitoring, and target-position-based
drug delivery.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.