Electrohydrodynamic printing (EHDP) has attracted extensive interests as a powerful technology to fabricate micro- to nano-scale fibrous scaffolds in a custom-tailored manner for biomedical applications. A few synthetic biopolymer inks are applicable to this EHDP technology, but the fabricated scaffolds suffered from low mechanical strength, biocompatibility, and biodegradability. In this study, a series of poly(ε-caprolactone) (PCL)/zein composite inks were developed and their printability was examined on a solution-based EHDP system for scaffold fabrication. Multilayer grid scaffolds were manufactured by PCL, PCL/zein-10, and PCL/zein-20 inks, respectively and characterized. The mechanical strength of scaffolds printed by PCL/zein composite inks was remarkably enhanced in terms of Young's modulus and yield stress. The enzyme-accelerated in vitro degradation study demonstrated that zein-containing scaffolds exhibited dose-responsive improvement on the degradation rate as evidenced by surface morphological change of fibers. Moreover, the biocompatibility of PCL/zein scaffolds, tested on mice embryonic fibroblast (NIH/3T3) and human nonsmall lung cancer cell (H1299), manifested better cell affinity. Our findings suggest that scaffolds fabricated by the solution-based EHDP with PCL/zein composite inks can significantly improve Young's modulus, yield stress, biocompatibility, and biodegradability and have potential applications in drug delivery systems, 3D cell culture modeling, or tissue engineering.

Current surgical treatments for meniscal tears suffer from subsequent degeneration of knee joints, limited donor organs and inconsistent post-treatment results. Three clinical scaffolds (Menaflex CMI, Actifit ® scaffold and NUsurface ® Meniscus Implant) are available on the market, but additional data are needed to properly evaluate their safety and effectiveness. Thus, many scaffold-based research activities have been done to develop new materials, structures and fabrication technologies to mimic native meniscus for cell attachment and subsequent tissue development, and restore functionalities of injured meniscus for long-term effects. This study begins with a synopsis of relevant structural features of meniscus and goes on to describe the critical considerations. Promising advances made in the field of meniscal scaffolding technology, in terms of biocompatible materials, fabrication methods, structure design and their impact on mechanical and biological properties are discussed in detail. Among all the scaffolding technologies, additive manufacturing (AM) is very promising because of its ability to precisely control fiber diameter, orientation, and pore network micro-architecture to mimic the native meniscus microenvironment.

Abstract:One of the important constituents in tissue engineering is scaffold, which provides structural support and suitable microenvironment for the cell attachment, growth and proliferation. To fabricate micro/nano structures for soft tissue repair and three-dimensional (3D) cell culture, the key is to improve fibre-based scaffold fabrication. Electrohydrodynamic (EHD) jetting is capable of producing and orientating submicron fibres for 3D scaffold fabrication. In this work, an EHD-jetting system was developed to explore the relationship between vital processing parameters and fibre characteristics. In this study, polycaprolactone (PCL) solution prepared by dissolving PCL pellets in acetic acid was used to fabricate the scaffolds. The influence of voltage, motorized stage speed, solution feed rate, and solution concentration on fibre characteristics and scaffold pattern were studied. Morphology of the EHD-jetted PCL fibres and scaffolds were analysed using optical microscope images and scanning electron microscope (SEM) images. Multi-layer scaffolds with the varied coiled pattern were fabricated and analysed. Cell attachment and proliferation have to be investigated in the future by further cell culture studies on these multi-layer coiled scaffolds.

Scaffold-based three-dimensional (3D) cell culture systems have gained increased interest in cell biology, tissue engineering, and drug screening fields as a replacement of twodimensional (2D) monolayer cell culture and as a way to provide biomimetic extracellular matrix environments. In this study, microscale fibrous scaffolds were fabricated via electrohydrodynamic printing, and nanoscale features were created on the fiber surface by simply leaching gliadin of poly(ε-caprolactone) (PCL)/ gliadin composites in ethanol solution. The microstructure of the printed scaffolds could be precisely controlled by printing parameters, and the surface nanotopography of the printed fiber could be tuned by varying the PCL/gliadin ratios. By seeding mouse embryonic fibroblast (NIH/3T3) cells and human nonsmall cell lung cancer (A549) cells on the printed scaffolds, the cellular responses showed that the fiber nanotopography on printed scaffolds efficiently favored cell adhesion, migration, proliferation, and tissue formation. Quantitative analysis of the transcript expression levels of A549 cells seeded on nanoporous scaffolds further revealed the upregulation of integrin-β1, focal adhesion kinase, Ki-67, E-cadherin, and epithelial growth factor receptors over what was observed in the cells grown on the pure PCL scaffold. Furthermore, a significant difference was found in the relevant biomarker expression on the developed scaffolds compared with that in the monolayer culture, demonstrating the potential of cancer cell-seeded scaffolds as 3D in vitro tumor models for cancer research and drug screening.