Electrospinning of poly(glycolic acid) (PGA)/chitin blend solutions in 1,1,1,3,3,3-hexafluoro-2-propanol was investigated to fabricate biodegradable and biomimetic nanostructured scaffolds for tissue engineering. The morphology of the electrospun PGA/chitin blend nanofibers was investigated with a field emission scanning electron microscope. The PGA/chitin blend fibers have average diameters of around 140 nm, and their diameters have a distribution in the range 50-350 nm. The miscibility of PGA/chitin blend fibers was examined by differential scanning calorimetry. The PGA and chitin were immiscible in the as-spun nanofibrous structure. An in vitro degradation study of PGA/chitin blend nanofibers was conducted in phosphate-buffered saline, pH 7.2. It was found that the hydrolytic cleavage of PGA in the blend nanofibers was accelerated by the coexistence of hydrophilic chitin. To assay the cytocompatability and cell behavior on the PGA/chitin blend nanofibrous scaffolds, cell attachment and spreading of normal human epidermal fibroblasts seeded on the scaffolds were studied. Our results indicate that the PGA/chitin blend nanofibrous matrix, particularly the one that contained 25% PGA and 75% chitin with bovine serum albumin coating, could be a good candidate for tissue engineering scaffolds, because it has an excellent cell attachment and spreading for normal human fibroblasts.

No abstract

No abstract

No abstract

Biodegradable poly(L-lactic acid) (PLA) fibrous scaffolds were prepared by electrospinning from a PLA melt containing poly(ethylene glycol) (PEG) as a plasticizer to obtain thinner fibers. The effects of PEG on the melt electrospinning of PLA were examined in terms of the melt viscosity and fiber diameter. Among the parameters, the content of PEG had a more significant effect on the average fiber diameter and its distribution than those of the spinning temperature. Furthermore, nano-/microfibrous silk fibroin (SF)/PLA and PLA/PLA composite scaffolds were fabricated by hybrid electrospinning, which involved a combination of solution electrospinning and melt electrospinning. The SF/PLA (20/80) scaffolds consisted of a randomly oriented structure of PLA microfibers (average fiber diameter = 8.9 µm) and SF nanofibers (average fiber diameter = 820 nm). The PLA nano-/microfiber (20/80) scaffolds were found to have similar pore parameters to the PLA microfiber scaffolds. The PLA scaffolds were treated with plasma in the presence of either oxygen or ammonia gas to modify the surface of the fibers. This approach of controlling the surface properties and diameter of fibers could be useful in the design and tailoring of novel scaffolds for tissue engineering.

Summary: PLGA nanofibers were prepared by an electrospinning method (mean diameter, 340 nm) and treated with plasma in the presence of either oxygen or ammonia gas to modify the surface of the nanofibers. The surface hydrophilicity of electrospun PLGA nanofibers was greatly increased by plasma treatment, which was confirmed by contact angle measurement. XPS analysis demonstrates that the number of polar groups on the surface of PLGA nanofibers after plasma treatment was increased, and this was considered to contribute to the enhanced surface hydrophilicity of the nanofibers. This approach to controlling the surface properties and structures of nanofibers could be useful in the design and tailoring of novel synthetic extracellular matrices for tissue engineering applications.

No abstract

The broad application of electrospun nanofibrous scaffolds in tissue engineering is limited by their small pore size, which has a negative influence on cell migration. This disadvantage could be significantly improved through the combination of nano- and microfibrous structure. To accomplish this, different nano/microfibrous scaffolds were produced by hybrid electrospinning, combining solution electrospinning with melt electrospinning, while varying the content of the nanofiber. The morphology of the silk fibroin (SF)/poly(ε-caprolactone) (PCL) nano/microfibrous composite scaffolds was investigated with field-emission scanning electron microscopy, while the mechanical and pore properties were assessed by measurement of tensile strength and mercury porosimetry. To assay cell proliferation, cell viability, and infiltration ability, human mesenchymal stem cells were seeded on the SF/PCL nano/microfibrous composite scaffolds. From in vivo tests, it was found that the bone-regenerating ability of SF/PCL nano/microfibrous composite scaffolds was closely associated with the nanofiber content in the composite scaffolds. In conclusion, this approach of controlling the nanofiber content in SF/PCL nano/microfibrous composite scaffolds could be useful in the design of novel scaffolds for tissue engineering.