No abstract

No abstract

One of the key issues for the development of high toughness carbon nanotube (CNT) reinforced composites is the control of the interfacial bond between the CNT and the matrix. Here, we introduce a novel technique to facilitate the homogeneous coating of single-walled carbon nanotube (SWCNT) bundles with polycarbosilane (PCS)-derived SiC nanoparticles. The PCS dissolved in n-hexane was used as a precursor for SiC nanoparticles. The results obtained from XRD, TEM and EDXS analyses confirmed the formation of β-SiC nanoparticles of about 20 nm in diameter, which possessed a relatively homogeneous distribution on the SWCNT bundles. It was shown that the number of SiC nanoparticles per unit of SWCNT surface area could be adjusted by changing the weight ratio of PCS and SWCNTs. This approach may provide a useful route for the preparation of SiC/SWCNT nanocomposites that have a tunable interface property with the matrix and potentially with an enhanced anchor effect, which may have potential applications as a reinforcing element in CNT/ceramic composites.

An absolute micro-encoder based on the code imaging is developed. The ball lens (<1>300 f.lITI) is asse mbled inside the cavity between the pyrex glass lid and suspensions in the handling Si layer of the SOl wafer. The photodiode array is prepared in the device Si layer. The image of the scale is incident on the backside of the photodiodes. The electrical wiring to photodiodes does not disturb the optics. The curren t signal shows the sufficient contrast for resolv ing the maximum length code having the minimum line width of 13.6 !lI11.

No abstract

No abstract

No abstract

No abstract