Please check the document version of this publication:• A submitted manuscript is the version of the article upon submission and before peer-review. There can be important differences between the submitted version and the official published version of record. People interested in the research are advised to contact the author for the final version of the publication, or visit the DOI to the publisher's website.• The final author version and the galley proof are versions of the publication after peer review.• The final published version features the final layout of the paper including the volume, issue and page numbers. Link to publication General rightsCopyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights.• Users may download and print one copy of any publication from the public portal for the purpose of private study or research.• You may not further distribute the material or use it for any profit-making activity or commercial gain • You may freely distribute the URL identifying the publication in the public portal.If the publication is distributed under the terms of Article 25fa of the Dutch Copyright Act, indicated by the "Taverne" license above, please follow below link for the End User Agreement: The Sb-induced changes in the optical properties of GaAsSb-capped InAs/GaAs quantum dots ͑QDs͒ are shown to be strongly correlated with structural changes. The observed redshift of the photoluminescence emission is shown to follow two different regimes. In the first regime, with Sb concentrations up to ϳ12%, the emission wavelength shifts up to ϳ1280 nm with a large enhancement of the luminescence characteristics. A structural analysis at the atomic scale by cross-sectional scanning tunneling microscopy shows that this enhancement arises from a gradual increase in QD height, which improves carrier confinement and reduces the sensitivity of the excitonic band gap to QD size fluctuations within the ensemble. The increased QD height results from the progressive suppression of QD decomposition during the capping process due to the presence of Sb atoms on the growth surface. In the second regime, with Sb concentrations above ϳ12%, the emission wavelength shifts up to ϳ1500 nm, but the luminescence characteristics progressively degrade with the Sb content. This degradation at high Sb contents occurs as a result of composition modulation in the capping layer and strain-induced Sb migration to the top of the QDs, together with a transition to a type-II band alignment.

The influence of a GaAsSb capping layer on the structural properties of self-assembled InAs/ GaAs quantum dots ͑QDs͒ is studied on the atomic scale by cross-sectional scanning tunneling microscopy. QDs capped with GaAs 0.75 Sb 0.25 exhibit a full pyramidal shape and a height more than twice that of the typical GaAs-capped QDs, indicating that capping with GaAsSb suppresses dot decomposition. This behavior is most likely related to the reduced lattice mismatch between the dot and the capping layer.

Please check the document version of this publication:• A submitted manuscript is the version of the article upon submission and before peer-review. There can be important differences between the submitted version and the official published version of record. People interested in the research are advised to contact the author for the final version of the publication, or visit the DOI to the publisher's website.• The final author version and the galley proof are versions of the publication after peer review.• The final published version features the final layout of the paper including the volume, issue and page numbers. Link to publication General rightsCopyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights.• Users may download and print one copy of any publication from the public portal for the purpose of private study or research.• You may not further distribute the material or use it for any profit-making activity or commercial gain • You may freely distribute the URL identifying the publication in the public portal.If the publication is distributed under the terms of Article 25fa of the Dutch Copyright Act, indicated by the "Taverne" license above, please follow below link for the End User Agreement: We report a combined experimental and theoretical analysis of Sb and In segregation during the epitaxial growth of InAs self-assembled quantum dot structures covered with a GaSbAs strain-reducing capping layer. Cross-sectional scanning tunneling microscopy shows strong Sb and In segregation which extends through the GaAsSb and into the GaAs matrix. We compare various existing models used to describe the exchange of group III and V atoms in semiconductors and conclude that commonly used methods that only consider segregation between two adjacent monolayers are insufficient to describe the experimental observations. We show that a three-layer model originally proposed for the SiGe system ͓D. J. Godbey and M. G. Ancona, J. Vac. Sci. Technol. A 15, 976 ͑1997͔͒ is instead capable of correctly describing the extended diffusion of both In and Sb atoms. Using atomistic modeling, we present strain maps of the quantum dot structures that show the propagation of the strain into the GaAs region is strongly affected by the shape and composition of the strain-reduction layer.

Please check the document version of this publication:• A submitted manuscript is the version of the article upon submission and before peer-review. There can be important differences between the submitted version and the official published version of record. People interested in the research are advised to contact the author for the final version of the publication, or visit the DOI to the publisher's website.• The final author version and the galley proof are versions of the publication after peer review.• The final published version features the final layout of the paper including the volume, issue and page numbers. Link to publication General rightsCopyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights.• Users may download and print one copy of any publication from the public portal for the purpose of private study or research.• You may not further distribute the material or use it for any profit-making activity or commercial gain • You may freely distribute the URL identifying the publication in the public portal.If the publication is distributed under the terms of Article 25fa of the Dutch Copyright Act, indicated by the "Taverne" license above, please follow below link for the End User Agreement: www.tue.nl/taverne Take down policy If you believe that this document breaches copyright please contact us at: openaccess@tue.nl providing details and we will investigate your claim. Structure-spectra relationship in semiconductor quantum dots ͑QDs͒ is investigated by subjecting the same QD sample to single-dot spectroscopy and cross-sectional scanning tunneling microscopy ͑XSTM͒ structural measurements. We find that the conventional approach of using XSTM structure as input to calculate the spectra produces some notable conflicts with the measured spectra. We demonstrate a theoretical "inverse approach" which deciphers structural information from the measured spectra and finds structural models that agree with both XSTM and spectroscopy data. This effectively "closes the loop" between structure and spectroscopy in QDs.

The impact of the capping material on the structural properties of self-assembled InAs quantum dots ͑QDs͒ was studied at the atomic scale by cross-sectional scanning tunneling microscopy. Capping with lattice matched layers and with strained layers was analyzed. When the different capping materials are lattice matched to the substrate, the differences in the QD properties can be dominated by chemical effects: InAs/InP QDs capped with InP have a 2 ML smaller height than those capped with InGaAs or InGaAsP due to As/P exchange induced decomposition. The height of the dots is found to be much more strongly affected when strained capping layers are used. InAs/GaAs, QDs capped with InGaAs are considerably taller than typical GaAs-capped dots. When GaAsSb is used as the capping layer, the dots are almost full pyramids with a height of 9.5 nm, indicating that dot decomposition is almost completely suppressed. This indicates that the dot/capping layer strain plays a major role in inducing dot decomposition during capping.

Pronounced Purcell enhancement of spontaneous emission in CdTe/ZnTe quantum dots embedded in micropillar cavities Appl. Phys. Lett. 101, 132105 (2012) Fabrication and photoluminescence of SiC quantum dots stemming from 3C, 6H, and 4H polytypes of bulk SiC Appl. Phys. Lett. 101, 131906 (2012) Radiative transitions in stacked type-II ZnMgTe quantum dots embedded in ZnSe J. Appl. Phys. 112, 063521 (2012) Anomalous temperature dependence of photoluminescence in self-assembled InGaN quantum dots Appl. Phys. Lett. 101, 131101 (2012) Optical properties of multi-stacked InGaAs/GaNAs quantum dot solar cell fabricated on GaAs (311)B substrate J. Appl. Phys. 112, 064314 (2012) Additional information on J. Appl. Phys. The origin of the modified optical properties of InAs/GaAs quantum dots (QD) capped with a thin GaAs 1Àx Sb x layer is analyzed in terms of the band structure. To do so, the size, shape, and composition of the QDs and capping layer are determined through cross-sectional scanning tunnelling microscopy and used as input parameters in an 8 Â 8 kÁp model. As the Sb content is increased, there are two competing effects determining carrier confinement and the oscillator strength: the increased QD height and reduced strain on one side and the reduced QD-capping layer valence band offset on the other. Nevertheless, the observed evolution of the photoluminescence (PL) intensity with Sb cannot be explained in terms of the oscillator strength between ground states, which decreases dramatically for Sb > 16%, where the band alignment becomes type II with the hole wavefunction localized outside the QD in the capping layer. Contrary to this behaviour, the PL intensity in the type II QDs is similar (at 15 K) or even larger (at room temperature) than in the type I Sb-free reference QDs. This indicates that the PL efficiency is dominated by carrier dynamics, which is altered by the presence of the GaAsSb capping layer. In particular, the presence of Sb leads to an enhanced PL thermal stability. From the comparison between the activation energies for thermal quenching of the PL and the modelled band structure, the main carrier escape mechanisms are suggested. In standard GaAs-capped QDs, escape of both electrons and holes to the GaAs barrier is the main PL quenching mechanism. For small-moderate Sb (<16%) for which the type I band alignment is kept, electrons escape to the GaAs barrier and holes escape to the GaAsSb capping layer, where redistribution and retraping processes can take place. For Sb contents above 16% (type-II region), holes remain in the GaAsSb layer and the escape of electrons from the QD to the GaAs barrier is most likely the dominant PL quenching mechanism. This means that electrons and holes behave dynamically as uncorrelated pairs in both the type-I and type-II structures. V C 2012 American Institute of Physics.[http://dx

DOI to the publisher's website. • The final author version and the galley proof are versions of the publication after peer review. • The final published version features the final layout of the paper including the volume, issue and page numbers. Link to publication General rights Copyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights. • Users may download and print one copy of any publication from the public portal for the purpose of private study or research. • You may not further distribute the material or use it for any profit-making activity or commercial gain • You may freely distribute the URL identifying the publication in the public portal. If the publication is distributed under the terms of Article 25fa of the Dutch Copyright Act, indicated by the "Taverne" license above, please follow below link for the End User Agreement:

Cross-sectional scanning tunneling microscopy was used to study at the atomic scale the impact of the capping material on the structural properties of self-assembled InAs quantum dots (QDs) grown on a high index (311)B InP substrate. Important differences were found in the capping process when InP or lattice matched InGaAs(P) alloys are used. The QDs capped with InP have a smaller height due to As∕P exchange induced decomposition. This effect is not present when InGaAs is used as the capping material. However, in this case a strong strain driven phase separation appears, creating In rich regions above the QDs and degrading the dot/capping layer interface. If the InAs dots are capped by the quaternary alloy InGaAsP the phase separation is much weaker as compared to capping with InGaAs and well defined interfaces are obtained.