Millimeter-wave communication is one way to alleviate the spectrum gridlock at lower frequencies while simultaneously providing high-bandwidth communication channels. MmWave makes use of MIMO through large antenna arrays at both the base station and the mobile station to provide sufficient received signal power. This article explains how beamforming and precoding are different in MIMO mmWave systems than in their lower-frequency counterparts, due to different hardware constraints and channel characteristics. Two potential architectures are reviewed: hybrid analog/digital precoding/combining and combining with low-resolution analog-to-digital converters. The potential gains and design challenges for these strategies are discussed, and future research directions are highlighted.

Abstract-In massive multiple-input multiple-output (MIMO) systems, it may not be power efficient to have a high-resolution analog-to-digital converter (ADC) for each antenna element. In this paper, a near maximum likelihood (nML) detector for uplink multiuser massive MIMO systems is proposed where each antenna is connected to a pair of one-bit ADCs, i.e., one for each real and imaginary component of the baseband signal. The exhaustive search over all the possible transmitted vectors required in the original maximum likelihood (ML) detection problem is relaxed to formulate an ML estimation problem. Then, the ML estimation problem is converted into a convex optimization problem which can be efficiently solved. Using the solution, the base station can perform simple symbol-by-symbol detection for the transmitted signals from multiple users. To further improve detection performance, we also develop a two-stage nML detector that exploits the structures of both the original ML and the proposed (one-stage) nML detectors. Numerical results show that the proposed nML detectors are efficient enough to simultaneously support multiple uplink users adopting higherorder constellations, e.g., 16 quadrature amplitude modulation. Since our detectors exploit the channel state information as part of the detection, an ML channel estimation technique with onebit ADCs that shares the same structure with our proposed nML detector is also developed. The proposed detectors and channel estimator provide a complete low power solution for the uplink of a massive MIMO system.

Abstract-With bandwidths on the order of a gigahertz in emerging wireless systems, high-resolution analog-to-digital convertors (ADCs) become a power consumption bottleneck. One solution is to employ low resolution one-bit ADCs. In this paper, we analyze the flat fading multiple-input multiple-output (MIMO) channel with one-bit ADCs. Channel state information is assumed to be known at both the transmitter and receiver. For the multiple-input single-output channel, we derive the exact channel capacity. For the single-input multiple-output and MIMO channel, the capacity at infinite signal-to-noise ratio (SNR) is found. We also derive upper bound at finite SNR, which is tight when the channel has full row rank. In addition, we propose an efficient method to design the input symbols to approach the capacity achieving solution. We incorporate millimeter wave channel characteristics and find the bounds on the infinite SNR capacity. The results show how the number of paths and number of receive antennas impact the capacity.

Abstract-We develop a broadband channel estimation algorithm for millimeter wave (mmWave) multiple input multiple output (MIMO) systems with few-bit analog-to-digital converters (ADCs). Our methodology exploits the joint sparsity of the mmWave MIMO channel in the angle and delay domains. We formulate the estimation problem as a noisy quantized compressedsensing problem and solve it using efficient approximate message passing (AMP) algorithms. In particular, we model the angledelay coefficients using a Bernoulli-Gaussian-mixture distribution with unknown parameters and use the expectation-maximization (EM) forms of the generalized AMP (GAMP) and vector AMP (VAMP) algorithms to simultaneously learn the distributional parameters and compute approximately minimum mean-squared error (MSE) estimates of the channel coefficients. We design a training sequence that allows fast, FFT-based implementation of these algorithms while minimizing peak-to-average power ratio at the transmitter, making our methods scale efficiently to large numbers of antenna elements and delays. We present the results of a detailed simulation study that compares our algorithms to several benchmarks. Our study investigates the effect of SNR, training length, training type, ADC resolution, and runtime on channel estimation MSE, mutual information, and achievable rate. It shows that, in a mmWave MIMO system, the methods we propose to exploit joint angle-delay sparsity allow one-bit ADCs to perform comparably to infinite-bit ADCs at low SNR, and 4-bit ADCs to perform comparably to infinite-bit ADCs at medium SNR.