Light-weight nanocomposites filled with carbon nanotubes (CNTs) are developed for their significant potentials in electromagnetic shielding and attenuation for wide applications in electronics, communication devices, and specific parts in aircrafts and vehicles. Specifically, the introduction of a second phase into/onto CNTs for achieving CNT-based heterostructures has been widely pursued due to the enhancement in either dielectric loss or magnetic loss. In this work, ferroferric oxide (Fe(3)O(4)) was selected as the phase in multiwalled carbon nanotube (MWCNT)-based composites for enhancing magnetic properties to obtain improved electromagnetic attenuation. A direct comparison between the two-phase heterostructures (Fe(3)O(4)/MWCNTs) and polyaniline (PANI) coated Fe(3)O(4)/MWCNTs, namely, three-phase heterostructures (PANI/Fe(3)O(4)/MWCNTs), was made to investigate the interface influences of Fe(3)O(4) and PANI on the complex permittivity and permeability separately. Compared to PANI/Fe(3)O(4)/MWCNTs, Fe(3)O(4)/MWCNTs exhibited enhanced magnetic properties coupled with increased dielectric properties. Interfaces between MWCNTs and heterostructures were found to play a role in the corresponding properties. The evaluation of microwave absorption of their wax composites was carried out, and the comparison between Fe(3)O(4)/MWCNTs and PANI/Fe(3)O(4)/MWCNTs with respect to highly efficient microwave absorption and effective absorption bandwidth was discussed.

Light weight and high efficiency are two key factors for microwave absorption materials. In particular, it is extremely important that absorption materials meet the harsh requirements of thermal environments. In this work, multi-wall carbon nanotubes decorated with ZnO nanocrystals (ZnO@MWCNTs) were synthesized by a mild solution-process synthesis. The high-temperature dielectric and microwave absorption properties of SiO 2 -based composites loaded with ZnO@MWCNTs (ZnO@MWCNTs/SiO 2 ) are investigated in 8.2-12.4GHz and in the 373-673 K temperature range. The imaginary permittivity 3 00 of the composite with 5 wt% loading presents a weak downward trend, while those of the composites with 10 and 15 wt% loading show an upward trend with increasing temperature, which reveals different temperature dependences of 3 00 . The 3 00 for 15 wt% loading is about 10 times that for 5 wt% loading. The maximum loss tangent tan d values of the composites with 10 and 15 wt% loading exceed 0.8, while that of the composites with 5 wt% loading is less than 0.3. High tan d is mainly attributed to the conductivity of ZnO@MWCNTs, which is dominated by the hopping of electrons in the ZnO@MWCNT network, which increases with elevated temperature. The addition of ZnO properly adjusts the complex permittivity to endow the ZnO@MWCNT/SiO 2 composites with highly efficient and thermally stable microwave absorption coupled with a broad attenuation bandwidth, which almost covers the full X-band for RL # À10 dB. A series of outstanding properties of ZnO@MWCNTs imply that it is a promising functional material in the world of microwave absorption.

No abstract

No abstract

No abstract

No abstract

No abstract

No abstract