No abstract

In this work, we examined the biocompatibility of electrospun chitosan microfibers as a scaffold. The chitosan microfibers showed a three-dimensional pore structure by SEM. The chitosan microfibers supported attachment and viability of rat muscle-derived stem cells (rMDSCs). Subcutaneous implantation of the chitosan microfibers demonstrated that implantation of rMDSCs containing chitosan microfibers induced lower host tissue responses with decreased macrophage accumulation than did the chitosan microfibers alone, probably due to the immunosuppression of the transplanted rMDSCs. Our results collectively show that chitosan microfibers could serve as a biocompatible in vivo scaffold for rMDSCs in rats.

No abstract

Smart textiles have wide applications in various sensing systems since they have the advantage of maintaining the inherent properties of textile such as light weight, flexibility, comfort, and breathability. Therefore, textile-based pressure sensors, one of the smart textiles, have attracted considerable interest in wearable electronics and homecare systems. In this study, to construct a textile-based pressure sensor, a poly(3,4-ethylenedioxythiophene) (PEDOT) thin film was fabricated on a polyethylene terephthalate microfiber fabric by vapor phase polymerization with various concentrations of the oxidant, FeCl 3 . The PEDOT conductive textile showed a change in conductivity depending on the applied pressure. We confirmed the excellent washing and physical durability of the sensor from the stable electrical properties of the PEDOT conductive textile after washing and repeated folding tests. Furthermore, a fully textile-based pressure sensor was successfully fabricated using the highly durable PEDOT, which could simultaneously measure both static and dynamic pressures even during physical deformation, thus suggesting great potential in smart textiles, especially textile-based homecare systems.

Poly(l-lactic acid) (PLLA) based piezoelectric polymers are gradually becoming the substitute for the conventional piezoelectric ceramic and polymeric materials due to their low cost and biodegradable, non-toxic, piezoelectric and non-pyroelectric nature. To improve the piezoelectric properties of melt-spun poly(l-lactic acid) (PLLA)/BaTiO3, we optimized the post-processing conditions to increase the proportion of the β crystalline phase. The α → β phase transition behaviour was determined by two-dimensional wide-angle x-ray diffraction and differential scanning calorimetry. The piezoelectric properties of PLLA/BaTiO3 fibres were characterised in their yarn and textile form through a tapping method. From these results, we confirmed that the crystalline phase transition of PLLA/BaTiO3 fibres was significantly enhanced under the optimised post-processing conditions at a draw ratio of 3 and temperature of 120 °C during the melt-spinning process. The results indicated that PLLA/BaTiO3 fibres could be a one of the material for organic-based piezoelectric sensors for application in textile-based wearable piezoelectric devices.