No abstract

No abstract

Public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing this collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. (From -To) REPORT DATE (DD-MM-YYYY) 22-11-2007 REPORT TYPE Journal Article DATES COVERED SPONSOR/MONITOR'S ACRONYM(S) AFRL-RY-HS SPONSOR/MONITOR'S REPORT NUMBER(S) AFRL-RY-HS-TP-2008-0018 DISTRIBUTION / AVAILABILITY STATEMENTDISTRIBUTION A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED. SUPPLEMENTARY NOTESThe U. S. Government is joint author of this work and has the right to use, modify, reproduce, release, perform, display, or disclose the work. ZnO is a wide bandgap semiconductor with very promising expectation for UV optoelectronics. The existence of large crystals should allow homoepitaxial growth of ZnO films for advanced optoelectronic devices. However, the ZnO substrates are not yet mature. Both defect induced by growth and by polishing together with the high reactivity of the surface are problems to their industrial application. Cathodoluminescence (CL) was used to probe the quality of substrates from two different suppliers. The surface damage was studied by varying the penetration depth of the electron beam, allowing to observe significant differences between the two samples within a 0.5-mm-thick surface layer. CL spectra show a complex band (P1) at _3.3 eV composed of two overlapped bands (3.31 and 3.29 eV) related to point defects (PD) and the 1-LO phonon replica of the free exciton (FX-1LO). This band (P1) is shown to be very sensitive to the presence of defects and the surface and thermal treatments. Its intensity compared with the excitonic band intensity is demonstrated to provide criteria about the quality of the substrates. SUBJECT TERMS AbstractZnO is a wide bandgap semiconductor with very promising expectation for UV optoelectronics. The existence of large crystals should allow homoepitaxial growth of ZnO films for advanced optoelectronic devices. However, the ZnO substrates are not yet mature. Both defect induced by growth and by polishing together with the high reactivity of the surface are problems to their industrial application. Cathodoluminescence (CL) was used to probe the quality of substrates from two different suppliers. The surface damage was studied by varying the penetra...

No abstract

No abstract

No abstract

Vickers indentations of ZnO crystals grown by the hydrothermal method were studied by cathodoluminescence. The defects induced by indentation influenced the luminescence spectrum, indicating the generation of non radiative recombination centers and a band close to the first phonon replica of the free exciton, in the surrounding area near the indentation. The possible nature of the defects responsible for such band is discussed. A comparison with polishing induced damage is also presented.

Intrinsic defects are generated by e‐irrradiation, and plastic deformation in ZnO crystals. Spectrally resolved cathodoluminescence (CL) experiments permit the analysis of the optical signature of those defects. We present herein a CL analysis of ZnO crystals irradiated with high energy electrons, and plastically deformed by Vickers indentation. Spectral changes around 3.3 eV and in the deep level emission are observed in the irradiated samples. These changes are compared to those observed around the extended defects introduced by Vickers indentation, which present a similar signature to the e‐irradiated samples, suggesting relation between the defects generated by plastic deformation and e‐irradiation. Zn vacancies seem to be the dominant defects generated in both processes (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)