Antibacterial sugar palm starch biopolymer composite films were developed and derived from renewable sources and inorganic silver nanoparticles (AgNPs) as main ingredients for antibacterial coatings. The composite films were produced by solution casting method and the mechanical and physicochemical properties were determined by tensile test, Fourier Transform Infrared (FTIR) analysis, thermal gravimetric analysis (TGA), antibacterial screening test and field emission scanning electron microscopy (FESEM) images. It was found that mechanical and antibacterial properties of biocomposite films were improved after the addition of AgNPs compared with the film without active metals. The weakness of neat biocomposite films was improved by incorporating inorganic AgNPs as a nanofiller in the films’ matrix to avoid bacterial growth. The results showed that the tensile strength ranged between 8 kPa and 408 kPa and the elasticity modulus was between 5.72 kPa and 9.86 kPa. The addition of AgNPs in FTIR analysis decreased the transmittance value, caused small changes in the chemical structure, caused small differences in the intensity peaks, and produced longer wavelengths. These active films increased the degradation weight and decomposition temperature due to the more heat-stable AgNPs. Meanwhile, the average inhibited areas measured were between 7.66 and 7.83 mm (Escherichia coli), 7.5 and 8.0 mm (Salmonella cholerasuis), and 0.1 and 0.5 mm for Staphylococcus aureus. From the microscopic analysis, it was observed that the average size of all microbes for 1 wt% and 4 wt% AgNPs ranged from 0.57 to 2.90 mm. Overall, 3 wt% AgNP nanofiller was found to be the best composition that fulfilled all the mechanical properties and had better antimicrobial properties. Thus, the development of an organic-inorganic hybrid of antibacterial biopolymer composite films is suitable for antibacterial coatings.

The sterling mechanical properties of titanium alloys have distinguished them as an essential material for varied applications especially in biomedical fields. The combination of good corrosion resistance in addition to light weight, non-toxicity and an outstanding biocompatibility makes them a sought-after material for production of medical implants. Owing to the surging demand for durable implants, it has become exigent for increased developmental researches on biomaterials to be accelerated. This will result in significant increase in implant production and Ti alloys will play a vital role among the several materials presently in use. Hence, this review critically analysed the important roles Ti alloys have played thus far in the implant production industry and recent development of titanium-based alloys with low elastic modulus similar to human bones as well as improved biocompatibility and wear resistance.

No abstract

In this study, polyester-kenaf fiber composites were prepared by adding various percentages of kenaf fiber in unsaturated polyester resin and subsequently cross-linked using methyl ethyl ketone peroxide and the accelerator cobalt octanoate. Liquid natural rubber (LNR) (3%) was added as a toughening agent. Kenaf fibers were treated with sodium hydroxide solution to improve the interfacial bonding between the fiber and the matrix. The mechanical properties of the composites were evaluated by impact and flexural testing. Environmental stress cracking resistance (ESCR) of composites in acid and base medium was also studied. Bonding mechanisms were assessed by scanning electron microscope and Fourier transform infrared analysis. It was found that the addition of LNR increased the impact strength and fracture toughness. Alkali fiber treatment was found to provide better impact and flexural strengths to the composites. Measurement of ESCR shows that the composite with acid medium has the fastest diffusion rate, followed by that with base medium, and then without medium.

No abstract

No abstract

No abstract

The mechanical performance of silica modified epoxy at various concentration of sodium hydroxide for surface treatment of multi-axial kenaf has been analyzed. Epoxy resin with amine hardener was modified with silica powder at 20 phr and toughened by treated kenaf fiber that immerses in various concentrations of sodium hydroxide (NaOH) ranging from 0% to 9% of weight. The composite was analyzed through differential scanning calorimetry (DSC) to ensure complete curing process. The mechanical properties of the composites were analyzed through flexural test, Charpy impact test and DSC to ensure the complete curing process. DSC analysis results show epoxy sample was completely cured at above 73°C that verifies the curing temperature for preparation for the composite. Hence, 3% NaOH treated composite exhibits the best mechanical properties, with 10.6 kJ/m2 of impact strength, 54.1 MPa of flexural strength and 3.5 GPa of flexural modulus. It is due to the improvement of fiber-matrix compatibility. Analysis by SEM also revealed that a cleaner surface of kenaf fiber treated at 3% NaOH shown cleaner surface, thus, in turn, improve surface interaction between fiber and matrix of the composite. The composites produced in this work has high potential to be used in automotive and domestics appliances.