The mechanism of forming-free bipolar resistive switching in a Zr/CeO
x
/Pt device was investigated. High-resolution transmission electron microscopy and energy-dispersive spectroscopy analysis indicated the formation of a ZrO
y
layer at the Zr/CeO
x
interface. X-ray diffraction studies of CeO
x
films revealed that they consist of nano-polycrystals embedded in a disordered lattice. The observed resistive switching was suggested to be linked with the formation and rupture of conductive filaments constituted by oxygen vacancies in the CeO
x
film and in the nonstoichiometric ZrO
y
interfacial layer. X-ray photoelectron spectroscopy study confirmed the presence of oxygen vacancies in both of the said regions. In the low-resistance ON state, the electrical conduction was found to be of ohmic nature, while the high-resistance OFF state was governed by trap-controlled space charge-limited mechanism. The stable resistive switching behavior and long retention times with an acceptable resistance ratio enable the device for its application in future nonvolatile resistive random access memory (RRAM).
Resistance switching characteristics of CeO2/Ti/CeO2 tri-layered films sandwiched between Pt bottom electrode and two different top electrodes (Ti and TaN) with different work functions have been investigated. RRAM memory cells composed of TaN/CeO2/Ti/CeO2/Pt reveal better resistive switching performance instead of Ti/CeO2/Ti/CeO2/Pt memory stacks. As compared to the Ti/CeO2 interface, much better ability of TaN/CeO2 interface to store and exchange plays a key role in the RS performance improvement, including lower forming/SET voltages, large memory window (~102) and no significant data degradation during endurance test of >104 switching cycles. The formation of TaON thinner interfacial layer between TaN TE and CeO2 film is found to be accountable for improved resistance switching behavior. Partial charge density of states is analyzed using density functional theory. It is found that the conductive filaments formed in CeO2 based devices is assisted by interstitial Ti dopant. Better stability and reproducibility in cycle-to-cycle (C2C) resistance distribution and Vset/Vreset uniformity were achieved due to the modulation of current conduction mechanism from Ohmic in low field region to Schottky emission in high field region.
An improvement in resistive switching (RS) characteristics of CeO2-based devices has been reported by charge transfer through Al metal as a dopant. Moreover, density functional theory (DFT) calculations have been performed to investigate the role of Al-layer sandwiched between CeO2 layers by the Vienna ab initio simulation package (VASP). Total density of states (TDOS) and partial electron density of states (PDOS) have been calculated and analyzed with respect to resistive switching. It is established that the oxygen vacancy based conductive filaments are formed and ruptured in the upper region of CeO2 layer, because of the fact that maximum transport of charge takes place in this region by Al and Ti (top electrode), while the lower region revealed less capability to generate conductive filaments because minimum charge transfer takes place in this region by Al and/or Pt (bottom electrode). The effect of Al and Al2O3 on both the electronic charge transfer from valence to conduction bands and the formation stability of oxygen vacancies in conductive filament have been discussed in detail. Experimental results demonstrated that the Ti/CeO2:Al/Pt sandwich structure exhibits significantly better switching characteristics including lower forming voltage, improved and stable SET/RESET voltages, enhanced endurance of more than 10(4) repetitive switching cycles and large memory window (ROFF/RON > 10(2)) as compared to undoped Ti/CeOx/Pt device. This improvement in memory switching behavior has been attributed to a significant decrease in the formation energy of oxygen vacancies and to the enhanced oxygen vacancies generation within the CeO2 layers owing to charge transferring and oxygen gettering ability of Al-dopant.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.