Salah satu metode untuk meningkatkan kualitas adalah Lean Six Sigma dengan konsep DMAIC (Define, Measure, Analyze, Improve, dan Control). Hal ini berorientasi bahwa hanya akan ada 3,4 cacat produk dari setiap 1 juta produk yang diproduksi. Penelitian ini bertujuan untuk meningkatkan kualitas produk lensa di PT. XYZ, terutama lensa tipe x yang sering terjadi cacat produk. Hasil penelitian menunjukan, ada 9 (sembilan) jenis cacat produk pada lensa tipe x selama periode Desember 2019. Diantaranya: Bubble, Mold Derty, Thicknes Out, Edge Problem, Crack, Rellease, Lint, Scratches dan Prishm. Dari hasil perhitungan didapatkan rata-rata level sigma yaitu 5,3 dengan nilai rata-rata DPMO sebesar 242. Berdasarkan diagram pareto, perbaikan diprioritaskan pada 3 (tiga) jenis cacat yang paling dominan. Yaitu jenis defect Bubble dengan persentase cacat 52%, Thicknes Out 30% dan Mold Derty 10%. Kemudian dilakukan analisis sebab akibat menggunakan fishbone, diketahui bahwa faktor manusia, material, tools, mesin, lingkungan dan metode menjadi faktor penyebab terjadinya ketiga jenis cacat. Tahap improvement dilakukan usulan perbaikan menggunakan metode 5W+1H sebagai bentuk perbaikan dalam peningkatan kualitas.
Tote bag ramah lingkungan merupakan ide usaha yang timbul dari permasalahan sosial, yaitu maraknya penggunaan plastik yang mencemari lingkungan. Dari permasalahan tersebut, muncullah ide untuk membuat produk pengganti plastik berbahan ramah lingkungan, tujuannya untuk menciptakan produk pengganti yang tidak menggantikan fungsi utamanya. Tote bag ramah lingkungan berbahan kain kanvas dengan desain yang memiliki nilai tambah dan dapat dilipat menjadi pocket bag, dengan tambahan unsur kain batik sebagai media pelestarian budaya Indonesia. Pemecahan masalah dilakukan melalui penelitian pustaka untuk mengumpulkan data terkait, serta analisis bisnis menggunakan metode analisis PESTEL dan STP (Segmentation, Targeting, dan Positioning). Berdasarkan metode yang telah dirancang, rencana usaha tote bag ramah lingkungan telah dilaksanakan sejak tanggal 10 Agustus 2020. Penjualan dan pemasaran dilakukan secara online dengan menggunakan konsep digital marketing. Target konsumen adalah remaja, baik laki-laki maupun perempuan, pada rentang usia 15–24 tahun. Pada tanggal 20–22 Oktober 2020 telah dilaksanakan launching produk, pre-order, dan telah dipesan sebanyak 10 unit dengan total pendapatan sebesar Rp.357.000.
The problems that occur in the company is the production system make to order, for example PT. XYZ. Unknown certainty the amount of the order lenses will be produced. So it is not known how labor should be allocated to each shift. Then used the approach of dynamic programming to optimize the number of workers per shift in the PT. XYZ. This study aims to determine the analysis of the dynamic programming optimization to allocate the amount of labor per shift to be effective. The type of research data is primary data obtained through direct observation in PT. XYZ. The results of the research based on the calculation of the forward recursive dynamic programming: shift 1 = 105 people, shift 2 = 104 people and shift 3 = 104 people. While the solution of the optimal allocation of labor for each shift based on the calculation of the backward recursive dynamic programming: shift 1 = 105 people, shift 2 = 104 people and Shift 3 = 104 people. Then the PT. XYZ should allocate 313 workers, so that the allocation of labor to each shift is optimal according to the order received
The problems at the National Dairy Depot are sales productivity problems, regarding the assignment of workers, as well as regarding the distribution allocation network in Teluk Jambe Timur District, which consists of nine workers. The purpose of this research is to optimize the distance and time in the distribution of National Milk. The method used in the assignment of workers is the Assignment (Hungarian) method, and to optimize the distribution network allocation of milk by using the Networking (Spanning Tree) method. Using these two methods, the optimum total allocation of products sold is 1350 pieces of national milk, and the minimum distance that must be traveled by workers in distributing national milk is 39.18 Km.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.