Artikel ini memaparkan tentang peningkatan daya keluaran panel surya menggunakan single axis tracker pada daerah khatulistiwa. Sistem tracker ini diuji menggunakan panel surya dengan kapasitas 50 Wp yang digunakan untuk sistem panel surya single axis tracker dan panel surya tetap. Proses pengambilan data dilaksanakan di Fakultas Teknik Universitas Negeri Padang, mulai pukul 08.30 WIB sampai pukul 16.00 WIB. Total daya listrik yang dihasilkan sistem panel surya single axis tracker dan panel surya keadaan tetap sebesar 244,97 W dan 181,63 W. Selisih daya listrik yang dihasilkan panel surya single axis tracker dan panel surya tetap yang diperoleh sebesar 63,34 W. Persentase peningkatan daya listrik yang didapatkan antara panel surya single axis tracker dan panel surya tetap sebesar 34,87%. Total konsumsi daya aktuator sebesar 59,46 W atau 24,27% yang dihasilkan panel surya menggunakan single axis tracker. Selisih daya yang dihasilkan panel surya single axis tracker dan konsumsi daya aktuator sebesar 185,51 W. Hal ini menunjukkan bahwa panel surya single axis tracker menggunakan aktuator lebih efisien dan menghasilkan daya yang lebih besar dibandingkan panel surya tetap, meskipun sebagian kelebihan daya tersebut sudah digunakan untuk suplai daya aktuator.
Solar cell merupakan salah satu energi terbarukan dengan memanfaatkan energi matahari untuk menghasilkan energi listrik. Namun solar cell yang telah terpasang saat sekarang ini masih bersifat statis. Untuk memaksimalkan konversi energi yang dihasilkan panel surya diperlukan actuator, yakni sebuah tuas penggerak dengan tenaga motor DC. Proses pengambilan data dilakukan di Lantai 5 Gedung Praktik bersama Universitas Negeri Padang. Terdapat dua buah panel surya dengan spesifikasi daya yang sama. Dimana salah satunya digunakan sistem tracking dan yang lainya dalam keadaan tetap. Pengambilan data dilakukan tanggal 22 Januari 2020 mulai pukul 08.30 WIB sampai dengan pukul 16.00 WIB. Hasil dari pengujian solar cell rata – rata tegangan tanpa dan dengan tracking sistem yaitu 19,4 volt dan 21,5 volt. Rata-rata arus tanpa dan dengan tracking sistem yaitu 0,58 A dan 1,05 A serta tegangan maksimal tanpa dan dengan tracking sistem yaitu 19,6 V dan 22,1 V. Selisih energi listrik yang dihasilkan dengan tracking sistem dan tanpa tracking sistem yaitu 180,62 Wh dan 361,75 Wh. Dapat disimpulkan solar cell yang terpasang menggunakan tracker menghasilkan daya yang lebih besar dibandingkan tanpa menggunakan tracker.
Brushless DC Motor is used frequently in industrial applications, because this type of motor has high efficiency and does not cause sparks. However, the speed control of this motor generally has a slow response to the set point and the speed is not constant when given different loads. Therefore, it is essential to design sophisticated speed control system for this motor to improve the constant speed and speed response. In this paper, fuzzy logic method for speed control system is used to give the decision of how much voltage will be added to the motor to get to the desired speed set point value, and how much voltage will be reduced if the speed of the motor passes through the speed set point. brushless dc motor speed is set with input voltage to the motor taking into account speed error and delta speed error using Fuzzy Logic, so that when the speed of the motor almost reaches the set point the input voltage to the motor is reduced so as not to overshoot until the speed of the motor reaches the set point. The results of this study gave a better response than not using fuzzy logic methods. Where at set point 270 gets response time to set point (Tr) faster 0.0002 seconds from 0.0046 seconds to 0.0044, the time to steady state (Ts) is faster 0.025 seconds from 0.04 seconds to 0.015 seconds, the maximum pass percentage (Mp) is reduced from 75% to 20%, and error speed from 1.5% to 0%. And for a trial load at t=0.025 seconds in set point 270 with a load of 4Nm responds to the set point back for 0.014 seconds.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.