Epoxy resin-impregnated insulation paper (RIP) composites are used as the inner insulation of dry condenser bushing in the ultra-high voltage direct current (UHVDC) power transmission system. To improve the dielectric properties and heat conductivity of RIP, hexagonal boron nitride (h-BN) nano-flakes are added to the insulation paper at concentrations of 0–50 wt % before impregnation with pure epoxy resin. X-ray diffraction (XRD), scanning electron microscopy (SEM) observations, thermal conductivity as well as the typical dielectric properties of direct current (DC) volume conductivity. DC breakdown strength and space charge characteristics were obtained. The maximum of nano-h-BN modified heat conductivity reach 0.478 W/(m·K), increased by 139% compared with unmodified RIP. The DC breakdown electric field strength of the nano-h-BN modified RIP does not reduce much. The conductivity of nano-h-BN modified is less sensitive to temperature. As well, the space charge is suppressed when the content is 50 wt %. Therefore, the nano-h-BN modified RIP is potentially useful in practical dry DC bushing application.
Epoxy resin-impregnated insulation paper (RIP) composites are used as the inner insulation of dry condenser bushing in the ultra-high voltage direct current (UHVDC) power transmission system. To improve the dielectric properties of RIP, nano-SiO2 is added to the insulation paper at concentrations of 0–4wt % before impregnation with pure epoxy resin. X-ray diffraction (XRD), scanning electron microscopy observations as well as the typical dielectric properties of relative permittivity, DC volume conductivity, DC breakdown strength, and thermally stimulated depolarization current (TSDC), were obtained. The effects of trap parameters on the breakdown field strength and volume conductivity were investigated. The DC breakdown electric field strength of the sample increased as the trap level increased. The maximum DC breakdown strength of nano-SiO2-modified RIP was increased by 10.6% the nano-SiO2 content of 2 wt %. The relative permittivity and DC volume conductivity were first decreased and then increased with increasing nano-SiO2 content. These changes occurred near the interfaces between nano-SiO2 and RIP. The increased DC breakdown strength was mainly attributed to the increased trap level.
High-voltage direct-current (HVDC) dry bushing capacitor-core insulation is composed of epoxy resin-impregnated insulating paper (RIP). To improve the thermal conductivity, breakdown strength, and space charge characteristics of RIP, 0.1 wt % nano-cellulose fiber (CNF)-modified RIP (CNF/RIP), 2.5–30 wt % hexagonal boron nitride (h-BN)-modified RIP (h-BN/RIP), and 2.5–30 wt % h-BN + 0.1 wt % CNF-modified RIP (h-BN + 0.1 wt % CNF/RIP) were prepared. Scanning electron microscopy (SEM) was implemented; the thermal conductivity, DC conductivity, DC breakdown strength, and space charge characteristics were tested. The maximum thermal conductivity of h-BN + 0.1 wt % CNF/RIP was 0.376 W/m.K with a h-BN content of 30 wt %. The thermal conductivity was 85.2% higher than that of unmodified RIP. The breakdown strength and charge suppression were the best in the case of 10 wt % h-BN + 0.1 wt % CNF/RIP. The maximum breakdown strength was 11.2% higher than that of unmodified RIP. These results can play a significant role in the research and development of insulation materials for HVDC dry bushing.
In order to solve the problem of space charge accumulation in high-voltage DC cable accessories, nanometer titanium dioxide (TiO 2) doping method is used to improve the space charge performance of liquid silicone rubber (LSR). Conductivity, dielectric spectrum and DC breakdown field strength, space charge distribution, and the trap level distribution of nano-TiO 2 / LSR composite samples were tested in this paper. With the increase of the doping concentration of nanoparticles, the DC conductivity increased, and the DC breakdown field strength decreased. The ε r of the TiO 2 /LSR composite sample increased with the increase in the doping concentration of nano-TiO 2. As the frequency increased, tanδ decreased first in the lowfrequency region and then increased in the high frequency. When the electric field strength increases from 10 to 20 kV/mm, the same polarity charges appear near the upper and lower electrodes of the sample, and the space charge accumulation doubled. After the addition of nano-TiO 2 , under the two electric field strengths, the space charge accumulation of 4 wt%-TiO 2 / LSR composite materials decreased by 24.55 nc and 81.03 nc, respectively. The trap energy level of the 4 wt% nano-TiO 2 composites becomes smaller, and shallow traps are introduced, it was verified that the addition of 4 wt% nano-TiO 2 particles reduced the space charge inside the composite sample and achieved the effect of suppressing space charge.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.