This research discusses the redesign of facility layout on metal smelting SMEs that experienced changes in the type of products produced due to shifting consumer needs. Changes in the type of product produced affect the flow of the production process and result in decreased productivity. This study aims to redesign facilities adapted to the type of product produced. Re-layout processes using the conventional method is started by making the operation process chart, drawing the initial layout, and calculate the total moment of product using the From-to Chart (FTC). By using some trial obtained a trial layout that can increase the productivity based on the total moment of the product and the number of output that can be produced. This study also determines the Cost of Production (HPP) for all metal casting products and compares them with previous conditions. This study shows that by re-layout, the output will be greater and the cost of production is cheaper.
The internship program is able to improve students' soft skills and hard skills as well as solve problems that exist in the industrial world. The student exchange program is able to improve student competence in participating in the transfer of existing knowledge at partner universities. Student certification and training programs are able to improve student scientific discipline in identifying problems and solving problems according to the scientific field. The Thematic Real Work Lecture Program is able to understand the culture, social and economics of the community so that students have the ability to draft village regulations and socialize them. Students' abilities in internships, student exchanges, student certification and training, and thematic Real Work Lecture activities are expected to enable students to achieve KPI 1, namely Graduates Get Decent Work.
CV Mandiri Jaya Logam merupakan UKM peleburan logam yang memproduksi aluminum batangan dengan kapasitas produksi sebesar 300–350 kg/hari di mana rata-rata berat setiap batang aluminium seberat 4,3 kg. UKM ini mempunyai luas area produksi 15m x 6m di mana area tempat produksinya sangat tidak teratur dan tidak ergonomis baik dari lingkungan kerja maupun kondisi kerjanya. Letak bahan baku yang tidak teratur dan letak tungku yang berjauhan dari cetakan membuat timba harus dipanaskan berulang kali sehingga pekerjaan menjadi tidak efisien. Oleh karena itu akan dilakukan penataan tata letak ruang produksi yang ergonomis yang dapat memperlancar proses produksi, memberikan kenyamanan kepada pekerja dalam melakukan pekerjaan sehingga produktivitas akan semakin meningkat. Program kemitraan masyarakat ini nantinya akan mengimplementasikan layout yang terbaik dilihat dari momen perpindahan materialnya yang telah dilakukan eksperimen dari program kemitraan masyarakat sebelumnya. Layout yang terpilih yaitu yang memiliki momen perpindahan material terendah. Selain itu tingkat produktivitasnya akan diukur berdasarkan jumlah produk yang dapat diproduksi.
In order to always meet their daily needs, the amount of water in the reservoir mustalways be maintained, which shall not be less than the minimum and not higher than themaximum limit. Thereby filling reservoir must be controlled. From the number of unitscontrolling water level in the reservoir turns encountered many disadvantages. Thisstudy aimed to innovate controller unit as perfecting the control unit that had beenthere. The control unit is designed to use a water level sensor. With SWOT analysis andLikert scale analysis eventually showed that the new control unit has a goodperformance and can be accepted by the public.Key Words: innovation, control, swot, Likert
UD Doa Emak merupakan sebuah UKM yang memproduksi mesin-mesin yang digunakan untuk industri skala rumah tangga. Produk yang dihasilkan oleh UKM ini antara lain mesin pemotong singkong, mesin pemarut kelapa, mesin pemeras santan, mesin pencabut bulu ayam dan masih banyak lagi. Inovasi keripik singkong yang ada dipasar saat ini semakin beragam terutama yang telah diproduksi oleh perusahaan-perusahaan besar yang banyak dijual di pasar ataupun supermarket. Penelitian ini merancang sebuah alat yang dapat membuat mata pisau berbentuk gelombang yang dapat digunakan untuk mata pisau mesin pemotong singkong yang diproduksi oleh UKM Doa Emak. Rancangan alat dibuat dengan mempertimbangkan aspek ergonomi dengan menggunakan ukuran antropometri 25 pekerja. Hasil uji coba menunjukkan bahwa alat pembuat mata pisau gelombang yang telah dirancang mampu menghasilkan mata pisau gelombang dengan kualitas yang baik dan hanya membutuhkan waktu 20 detik untuk menghasilkan satu mata pisau. Alat pembuat mata pisau bentuk gelombang ini mampu memproduksi pisau gelombang hingga 1.260 pcs per hari yang dapat digunakan untuk membuat 315 mesin pemotong singkong. Sehingga hasil produksi pisau berbentuk gelombang tersebut dapat menjadi stock untuk pembuatan mesin pemotong singkong dalam 20 hari ke depan.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.