No abstract

Polymeric biomaterials are being widely used for the treatment of various traumata, diseases and defects in human beings due to ease in their synthesis. As biomaterials have direct interaction with the extracellular environment in the biological world, biocompatibility is a topic of great significance. The introduction or enhancement of biocompatibility in certain polymers is still a challenge to overcome. Polymer biocompatibility can be controlled by surface modification Various physical and chemical methods (e.g., chemical and plasma treatment, ion implantation, and ultraviolet irradiation etc.) are in use or being developed for the modification of polymer surfaces. However an important limitation in their employment is the alteration of bulk material. Different surface and bulk properties of biomaterials are often desirable for biomedical applications. Because extreme ultraviolet (EUV) radiation penetration is quite limited even in low density mediums, it could be possible to use it for surface modification without influencing the bulk material. This article reviews the degree of biocompatibility of different polymeric biomaterials being currently employed in various biomedical applications, the surface properties required to be modified for biocompatibility control, plasma and laser ablation based surface modification techniques, and research studies indicating possible use of EUV for enhancing biocompatibility.

No abstract

No abstract

This letter reports the first study of x-ray emission from plasma produced by laser irradiation of gas puff targets. The gas puff targets were created by the pulsed injection of gas into a vacuum chamber. To irradiate the gas puff target a Nd-glass laser was used, which generated 1-ns pulses of up to 15 J in energy. Spatial, spectral, and temporal measurements show that intense soft x-ray emission from the laser-irradiated gas puff target is produced.

In this paper we report a desk-top microscopy reaching 50 nm spatial resolution in very compact setup using a gas-puff laser plasma EUV source. The thickness of an object and the bandwidth of illuminating radiation were studied in order to estimate their quantitative influence on the EUV microscope spatial resolution. EUV images of various thickness objects obtained by illumination with variable bandwidth EUV radiation were compared in terms of knife-edge spatial resolution to study the bandwidth/object thickness parasitic influence on spatial resolution of the EUV microscope.

We report the first (to our knowledge) demonstration of a tabletop, extreme UV (EUV) transmission microscope at 13.8 nm wavelength with a spatial (half-pitch) resolution of 69 nm. In the experiment, a compact laser-plasma EUV source based on a gas puff target is applied to illuminate an object. A multilayer ellipsoidal mirror is used to focus quasi-monochromatic EUV radiation onto the object, while a Fresnel zone plate objective forms the image. The experiment and the spatial resolution measurements, based on a knife-edge test, are described. The results might be useful for the realization of a compact high-resolution tabletop imaging systems for actinic defect characterization.

Large-scale plasma was created in molecular gases (CO, CO2, N2, H2O) and their mixtures by high-power laser-induced dielectric breakdown (LIDB). Compositions of the mixtures used are those suggested for the early earth's atmosphere of neutral and/or mildly reducing character. Time-integrated optical spectra emitted from the laser spark have been measured and analyzed. The spectra of the plasma generated in the CO-containing mixtures are dominated by emission of both C2 and CN radicals. A vibrational temperature of approximately 10(4) K was determined according to an intensity distribution in a vibronic structure of the CN (B2Sigma(+)u-X2Sigma(+)g) violet band. For comparison, the NH3-CH4-H2-H2O mixture has been irradiated as a model of the strongly reducing version of the early earth's atmosphere. In this mixture, excited CN seems to be significantly less abundant than C2. The LIDB experiments were in the molecular gases carried out not only in the static cell but also using a large, double stream pulse jet (gas puff target) placed in the vacuum interaction chamber. The obtained soft X-ray emission spectra indicate the presence of highly charged atomic ions in the hot core of high-power laser sparks.