No abstract

The detailed study of the low energy secondary electron yield (LE-SEY) of technical Cu for low electron energies (from 0 to 20 eV) is very important for electron cloud build up in high intensity accelerators and in many other fields of research. Different devices base their functionalities on the number of electrons produced by a surface when hit by other electrons, namely its SEY, and, in most cases, on its very low energy behavior. However, LE-SEY has been rarely addressed due to the intrinsic experimental complexity to control very low energy electrons. Furthermore, several results published in the past have been recently questioned, allegedly suffering from experimental systematics. Here, we critically review the experimental method used to study LE-SEY and precisely define the energy region in which the experimental data can be considered valid. By analyzing the significantly different behavior of LE-SEY in clean polycrystalline Cu (going toward zero at zero impinging energies) and in its as received technical counterpart (maintaining a significant value in the entire region), we solve most, if not all, of the apparent controversy present in the literature, producing important inputs for better understanding the device performances related to their LE-SEY. Simulations are then performed to address the impact of such results on electron cloud predictions in the LH

Abstract-Beam instabilities cover a wide range of effects in particle accelerators and they have been the subject of intense research for several decades. As the machines performance was pushed new mechanisms were revealed and nowadays the challenge consists in studying the interplays between all this intricate phenomena, as it is very often not possible to treat the different effects separately. The aim of this paper is to review the main mechanisms, discussing in particular the recent developments of beam instability theories and simulations.

Numerical formulations based on surface integral equations (SIEs) provide an accurate and efficient framework for the solution of the electromagnetic scattering problem by three-dimensional plasmonic nanostructures in the frequency domain. In this paper, we present a unified description of SIE formulations with both singular and nonsingular kernel and we study their accuracy in solving the scattering problem by metallic nanoparticles with spherical and nonspherical shape. In fact, the accuracy of the numerical solution, especially in the near zone, is of great importance in the analysis and design of plasmonic nanostructures, whose operation critically depends on the manipulation of electromagnetic hot spots. Four formulation types are considered: the N-combined region integral equations, the T-combined region integral equations, the combined field integral equations and the null field integral equations. A detailed comparison between their numerical solutions obtained for several nanoparticle shapes is performed by examining convergence rate and accuracy in both the far and near zone of the scatterer as a function of the number of degrees of freedom. A rigorous analysis of SIE formulations and their limitations can have a high impact on the engineering of numerous nano-scale optical devices such as plasmon-enhanced light emitters, biosensors, photodetectors, and nanoantennas.

Beam-induced heat loads on the cryogenic regions of the Large Hadron Collider (LHC) exhibit a wide and unexpected dispersion along the accelerator, with potential impact on the performance of its High-Luminosity upgrade. Studies related the heat load source to the avalanche multiplication of electrons at the surface of the beam vacuum chamber, a phenomenon known as electron could build-up. Here, we demonstrate that the topmost copper surface of beam pipes extracted from a low heat load region of the LHC consists of native Cu2O, while the pipe surface from a high heat load region had been oxidized to CuO during LHC operation and maintenance cycles. Experiments show that this process increases the secondary electron yield and inhibits efficient surface conditioning, thus enhancing the electron cloud intensity during LHC operation. This study relates the abnormal LHC heat loads to beam-induced surface modifications of its beam pipes, enabling the development of curative solutions to overcome this critical limitation.

No abstract

The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community working in fundamental particle physics and the physics of hadronic matter at extreme temperature and density. To sustain and extend its discovery potential, the LHC will undergo a major upgrade in the 2020s. This will increase its rate of collisions by a factor of five beyond the original design value and the integrated luminosity by a factor ten. The new configuration, known as High Luminosity LHC (HL-LHC), will rely on a number of key innovations that push accelerator technology beyond its present limits. Among these are cutting-edge 11 − 12 T superconducting magnets, including Nb 3 Sn-based magnets never used in accelerators before, compact superconducting cavities for longitudinal beam rotation, new technology and physical processes for beam collimation. The dynamics of the HL-LHC beams will be also particularly challenging and this aspect is the main focus of this paper.

SixTrack is a single-particle tracking code for high-energy circular accelerators routinely used at CERN for the Large Hadron Collider (LHC), its luminosity upgrade (HL-LHC), the Future Circular Collider (FCC) and the Super Proton Synchrotron (SPS) simulations. The code is based on a 6D symplectic tracking engine, which is optimized for long-term tracking simulations and delivers fully reproducible results on several platforms. It also includes multiple scattering engines for beam–matter interaction studies, as well as facilities to run the integrated simulations with external particle matter interaction codes. These features differentiate SixTrack from general-purpose, optics-design software. The code recently underwent a major restructuring to merge the advanced features into a single branch, such as multiple ion species, interface with external codes and high-performance input/output. This restructuring also removed a large number of compilation flags, instead enabling/disabling the functionality with runtime options. In the process, the code was moved from Fortran 77 to Fortran 2018 standard, also allowing and achieving a better modularization. Physics models (beam–beam effects, Radio-Frequency (RF) multipoles, current carrying wires, solenoid and electron lenses) and methods (symplecticity check) have also been reviewed and refined to offer more accurate results. The SixDesk runtime environment allows the user to manage the large batches of simulations required for accurate predictions of the dynamic aperture. SixDesk supports several cluster environments available at CERN as well as submitting jobs to the LHC@Home volunteering computing project, which enables volunteers contributing with their hardware to CERN simulation. SixTrackLib is a new library aimed at providing a portable and flexible tracking engine for single- and multi-particle problems using the models and formalism of SixTrack. The library is able to run in CPUs as well as graphical processing units (GPUs). This contribution presents the status of the code, summarizes the main existing features and provides details about the main development lines SixTrack, SixDesk and SixTrackLib.