This paper deals with a phenomenon often occurring in sewers during storm events - transition from free surface to pressurized flow and vice versa. This transition is also possible in sewers where the discharge is controlled by some control devices, like gates. Experiments were carried out at a test rig consisting of a circular pipe with gates at the upstream and the downstream ends. Because of the relatively steep slope of the pipe and upstream boundary condition (flow below the gate), free surface flow at the upstream end was always supercritical, so that a hydraulic jump was always present during transitions (transcritical flow). Experimental results were used for verification of a numerical model based on a shock capturing method, the McCormack explicit finite difference scheme.

No abstract

No abstract

This study presents the results of clear-water tests on the following five combined flow-altering countermeasures against bridge pier scour: (1) submerged vanes and a bed sill, (2) slot and sacrificial piles, (3) a collar and sacrificial piles, (4) a slot and a collar, and (5) a bed sill and a collar. Each countermeasure was designed on the basis of the best configuration recommended in the literature. The results clarify that an improper combination of two countermeasures may be less effective than each individual countermeasure; combinations (1), (2), and (3) do not reduce the scour depth significantly with respect to the single countermeasures; combination (3) increases the scour rate during the first few hours with respect to a single collar; combination (4) may also prevent scour intrusion beneath a collar; and combination (5) in the best configuration reduces the scour depth significantly around the collar with respect to maximum scour depth of the unprotected pier, preventing also the scour hole reaching the pier body.

No abstract

Vegetation on the banks and flooding areas of watercourses significantly affects energy losses. To take the latter into account, computational models make use of resistance coefficients based on the evaluation of bed and walls roughness besides the resistance to flow offered by vegetation. This paper, after summarizing the classical approaches based on descriptions and pictures, considers the recent advancements related to the analytical methods relative both to rigid and flexible vegetation. In particular, emergent rigid vegetation is first analyzed by focusing on the methods for determining the drag coefficient, then submerged rigid vegetation is analyzed, highlighting briefly the principles on which the different models are based and recalling the comparisons made in the literature. Then, the models used in the case of both emergent and submerged rigid vegetation are highlighted. As to flexible vegetation, the paper reminds first the flow conditions that cause the vegetation to lay on the channel bed, and then the classical resistance laws that were developed for the design of irrigation canals. The most recent developments in the case of submerged and emergent flexible vegetation are then presented. Since turbulence studies should be considered as the basis of flow resistance, even though the path toward practical use is still long, the new developments in the field of 3D numerical methods are briefly reviewed, presently used to assess the characteristics of turbulence and the transport of sediments and pollutants. The use of remote sensing to map riparian vegetation and estimating biomechanical parameters is briefly analyzed. Finally, some applications are presented, aimed at highlighting, in real cases, the influence exerted by vegetation on water depth and maintenance interventions.

No abstract

No abstract