No abstract

Hydroxyapatite (HA)-gelatin scaffolds incorporated with dexamethasone-loaded polylactic-co-glycolic acid (PLGA) microspheres were synthesized by freeze casting technique. Scanning electron microscopy (SEM) micrographs demonstrated a unidirectional microstructure and a decrease in the pore size as a function of temperature gradient. Higher amounts of HA resulted in a decrease in the pore size. According to the results, at lower cooling rates, the formation of a lamellar structure decreased the mechanical strength, but at the same time, enhanced the swelling ratio, biodegradation rate and drug release level. On the other hand, higher weight ratios of HA increased the compressive strength, and reduced the swelling ratio, biodegradation rate and drug release level. The results obtained by furrier transform infrared spectroscopy (FTIR) and bioactivity analysis illustrated that the interactions of the materials support the apatite formation in the simulated body fluid (SBF) solution. Based on the obtained results, the synthesized composite scaffolds have the necessary mechanical and physicochemical features to support the regeneration of defects and to maintain their stability during the neo-tissue formation.

No abstract

No abstract

No abstract

Unidirectional freeze‐casting method is used to fabricate gelatin–bioglass nanoparticles (BGNPs) scaffolds. Transmission electron microscopy (TEM) images show that sol–gel prepared BGNPs are distributed throughout the scaffold with diameters of less than 10 nm. Fourier transform infrared spectroscopy (FTIR), and differential scanning calorimetric are used to evaluate the physicochemical properties of BGNPs. Scanning electron microscopy (SEM) micrographs present an oriented porous structure and a homogeneous distribution of BGNPs in the gelatin matrix. The lamellar‐type structure indicates an improvement of mechanical strength and absorption capacity of the scaffolds. Increasing the concentration of BGNPs from 0 to 50 wt% have no noticeable effect on pore orientation, but decreases porosity and pore size distribution. Increase in BGNPs content improves the compressive strength. The absorption and biodegradation rate reduces with augmentation in BGNPs concentration. Bioactivity is evaluated through apatite formation after immersion of the nanocomposites in simulated body fluid and is verified by SEM–energy‐dispersive X‐ray spectroscopy (EDS), an element map analysis, X‐ray powder diffractometer, and FTIR spectrum. SEM images and methyl thiazolyl tetrazolium assay confirm the biocompatibility of scaffolds and the supportive behavior of nanocomposites in cellular spreading. The results show that gelatin–(30 wt%)bioglass nanocomposites have incipient physicochemical and biological properties.

No abstract

Polyurethane (PU) has been extensively used in vascular tissue engineering due to its outstanding mechanical performance and blood compatibility behavior. Here, biomimetic PU-based scaffolds were prepared using an electrospinning technique and gelatin-heparin was introduced as a surface modifier after oxygen plasma treatment to improve cell attachment and release an anticoagulation agent. Morphology, Fourier transform infrared (FTIR) spectroscopy, compression strength, swelling and biodegradation ratio, drug release level and cellular interactions were evaluated. According to the scanning electron microscopy (SEM) micrographs, gelatin-heparin immobilized PU nanofibers exhibited a smooth surface and a bead free structure that nanofibers distributed in the range of 300–1000 nm. The mechanical strength of constructs, swelling and biodegradation ratio, and drug release level illustrated higher values for oxygen plasma-treated samples compared with bilayered scaffolds. Cellular adhesion and biocompatibility ameliorated after plasma treatment. All the mentioned findings indicated the initial physicomechanical and biological potential of biomimetic PU-based fibers in the improvements of vascular scaffolds.