No abstract

Bitter melon (Momordica charantia L.) is a versatile plant that can be consumed as a food and has therapeutic applications. Studying its drying process is important to maintain their leaf quality during storage. The objective of this study was to evaluate the drying kinetics of bitter melon leaves and determine their thermodynamic properties. The leaves were placed in polyethylene trays and subjected to drying in an oven at temperatures of 20, 30, 40, and 50 °C until reaching hygroscopic equilibrium. The experimental data were fitted to several non-linear regression models to characterize the drying process. The Arrhenius model was used to obtain the coefficients of diffusion and the activation energy, which were used to calculate the enthalpy, entropy, and the Gibbs free energy. Midilli and Page were the best models to represent the drying kinetics of bitter melon leaves at temperatures of 20, 30, 40, and 50 °C. Increases in the drying air temperature increased the Gibbs free energy and water diffusivity in the interior of the leaves. Enthalpy and entropy decreased as the temperature was increased.

In this study, we describe the design and fabrication of an industrial injection moulding system that can be mounted and used on the NCD-SWEET small-angle X-ray scattering beamline at ALBA. We show how highly useful time-resolved data can be obtained using this system. We are able to evaluate the fraction of the material in the mould cavity and identify the first material to solidify and how this varies with the injection temperature. The design follows current industrial practice and provides opportunities to collect time-resolved data at several points within the mould cavity so that we can build up a 4D perspective of the morphology and its temporal development. The quantitative data obtained will prove invaluable for the optimisation of the next generation of injection moulding techniques. This preliminary work used results from the injection moulding of a general-purpose isotactic polypropylene.

Direct digital manufacturing consists of a set of techniques that enable products to be fabricated directly from their digital definition, without the use of complex tooling or moulds. This manufacturing approach streamlines prototyping and small-scale production, as well as the mass customization of parts with complex designs immediately fixed before fabrication. With broad applicability, there are clearly opportunities in the field of medical devices for its use. However, many of the developments of direct digital manufacturing focus on simply specifying the shape or the form of the product, and this limited scope throws away many of the particular advantages of direct digital manufacturing. This work is focused on remedying this situation so that the digital specification of the fabricated product includes the properties as well as the form of the product. We use in situ time-resolving small-angle X-ray scattering measurements performed at the ALBA Synchrotron Light Source in Barcelona to evaluate the control that can be exerted on the morphology of a semi-crystalline polymer during extruder-based 3D printing. We use this as a methodology for printing the patterns of the morphology of the polymer to realise the patterns of properties of the polymeric material, specifically the modulus of the polymer. We give an example of products produced in this manner that contain spatial variation in their properties.

No abstract

No abstract

No abstract

This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https:// creativecommons.org/licenses/by/ 4.0/).