Background:Burnout has been described as a prolonged response to chronic emotional and interpersonal stress on the job that is often the result of a period of expending excessive effort at work while having too little recovery time. Healthcare workers who work in a stressful medical environment, especially in an intensive care unit (ICU), may be particularly susceptible to burnout. In healthcare workers, burnout may affect their well-being and the quality of professional care they provide and can, therefore, be detrimental to patient safety. The objectives of this study were: to determine the prevalence of burnout in the ICU setting; and to identify factors associated with burnout in ICU professionals.Methods:The original articles for observational studies were retrieved from PubMed, MEDLINE, and Web of Science in June 2016 using the following MeSH terms: “burnout” and “intensive care unit”. Articles that were published in English between January 1996 and June 2016 were eligible for inclusion. Two reviewers evaluated the abstracts identified using our search criteria prior to full text review. To be included in the final analysis, studies were required to have employed an observational study design and examined the associations between any risk factors and burnout in the ICU setting.Results:Overall, 203 full text articles were identified in the electronic databases after the exclusion of duplicate articles. After the initial review, 25 studies fulfilled the inclusion criteria. The prevalence of burnout in ICU professionals in the included studies ranged from 6% to 47%. The following factors were reported to be associated with burnout: age, sex, marital status, personality traits, work experience in an ICU, work environment, workload and shift work, ethical issues, and end-of-life decision-making.Conclusions:The impact of the identified factors on burnout remains poorly understood. Nevertheless, this review presents important information, suggesting that ICU professionals may suffer from a high level of burnout, potentially threatening patient care. Future work should address the effective management of the factors negatively affecting ICU professionals.

Background and Objectives: A reliable method to eradicate the bacteria of residual carious dentin has not yet been developed. The aim of this study was to evaluate the antibacterial effect of a diode laser on Streptococcus mutans through different thickness (500, 1,000, and 2,000 mm) of human dentin. The thermal effect of laser irradiation was also investigated. Study Design/Materials and Methods: Dentin specimens were inoculated with 2 ml of S. mutans on one side and irradiated by a diode laser on the other side with a power output ranging from 0.5 to 7 W. The laser tip was swept with the whole irradiation area of 7 mmÂ3 mm at a speed of about 10 mm/second with a total irradiation time of 30 seconds. Cooling with distilled water (30 ml/minute) was applied simultaneously during laser irradiation. After laser irradiation, the bacteria was removed from the dentin surfaces and cultured for 48 hours at 378C anaerobically to assess the colony forming units (CFU) per ml. The morphology of the lased bacteria and the temperature rise during laser irradiation were observed by scanning electron microscope (SEM) and measured by thermocouple, respectively. Results: The results revealed that 7 W of laser power could kill 97.7% of CFU through 500 mm thickness of dentin. However, the bactericidal efficiency was significantly reduced as the dentin thickness was increased. The morphological changes of lased bacteria ranged from less affected such as loss of their wall bands and existence of minicells to more severely degenerated, such as disintegration and fusion of cells with pores on the cell wall. Only the dentin specimens with a thickness of 500 mm exhibited a temperature rise greater than 5.58C after receiving 5 or 7 W of laser irradiation. Conclusions: A diode laser can eliminate the Streptococcus mutans of the residual carious dentin without inducing high pulpal temperature rise when the remaining dentin thickness is greater than 1 mm.

No abstract

We evaluated the feasibility of using the modified Brazilian disk test to measure the post-dentin interfacial bond strength. Advanced nondestructive examination and imaging techniques in the form of acoustic emission (AE) and digital image correlation (DIC) were used innovatively to capture the fracture process in real time. DIC showed strain concentration first appearing at one of the lateral sides of the post-dentin interface. The appearance of the interfacial strain concentration also coincided with the first AE signal detected. The new method has the advantages of simpler specimen preparation, no premature failure, more consistent failure mode and smaller variations in the calculated bond strength.

No abstract

We have demonstrated that the luminescence properties of CdSe nanoparticles can be manipulated by self-assembled silica photonic crystal. When the emitting wavelength of nanoparticles matches the stop band of the photonic crystal, the photoluminescence of the CdSe nanoparticles can be greatly enhanced by up to five times. By changing the collection angle of photoluminescence measurements, the photoluminescence intensity of CdSe embedded in photonic crystal can also be controlled.

No abstract

No abstract