The objective of this work was to study the influence of cellulose nanofibrils (CNF) on the physical, mechanical, and thermal properties of Jatropha oil-based waterborne polyurethane (WBPU) nanocomposite films. The polyol to produce polyurethane was synthesized from crude Jatropha oil through epoxidation and ring-opening method. The chain extender, 1,6-hexanediol, was used to improve film elasticity by 0.1, 0.25, and 0.5 wt.% of CNF loading was incorporated to enhance film performance. Mechanical performance was studied using a universal test machine as specified in ASTM D638-03 Type V and was achieved by 0.18 MPa at 0.5 wt.% of CNF. Thermal gravimetric analysis (TGA) was performed to measure the temperature of degradation and the chemical crosslinking and film morphology were studied using Fourier-transform infrared spectroscopy (FTIR) and field emission scanning electron microscopy (FESEM). The results showed that when the CNF was incorporated, it was found to enhance the nanocomposite film, in particular its mechanical and thermal properties supported by morphology. Nanocomposite film with 0.5 wt.% of CNF showed the highest improvement in terms of tensile strength, Young’s modulus, and thermal degradation. Although the contact angle decreases as the CNF content increases, the effect on the water absorption of the film was found to be relatively small (<3.5%). The difference between the neat WPBU and the highest CNF loading film was not more than 1%, even after 5 days of being immersed in water.
A floating catalyst chemical vapor deposition (FC-CVD) method was designed and fabricated to produce high quality and quantity carbon nanotubes. The reaction temperature was optimized to produce high yield and purity of the carbon nanotubes. The reaction temperatures were varied from 500–850°C. The result shows that carbon nanotubes were observed from 600°C to 850°C with maximum numbers and high purity at 850°C. The diameter range of CNTs varied from 2 to 55 nm. The results of the present investigation suggest that the observed changes in catalytic activity and selectivity accompanying an increase in temperature are probably due to major alterations in the distribution of atoms at the metal/gas interface. Thermodynamically, higher temperatures favor the surface decomposition of hydrocarbon rather than the hydrogenation reactions.
Multi-walled carbon nanotubes (MWNTs) were used to prepare natural rubber (NR) nanocomposites. Our first effort to achieve nanostructures in MWNTs/NR nanocomposites were formed by incorporating carbonnanotubes in a polymer solution and subsequently evaporating the solvent. Using this technique, nanotubess can be dispersed homogeneously in the NR matrix in an attempt to increase the mechanical properties of these nanocomposites. The properties of the nanocomposites such as tensile strength, tensile modulus, tear strength, elongation at break and hardness were studied. Mechanical test results show an increase in the initial modulus for up to 12 times in relation to pure NR. In addition to mechanical testing, the dispersion state of the MWNTs into NR was studied by transmission electron microscopy (TEM) in order to understand the morphology of the resulting system. According to the present study, application of the physical and mechanical properties of carbon nanotubes to NR can result in rubber products which have improved mechanical, physical and chemical properties, compared with existing rubber products reinforced with carbon black or silicone.
Polyurethanes (PUs) are unique polymers that can be tailored to suit certain applications and are increasingly used in many industrial fields. Petrochemicals are still used as the main compound to synthesize PUs. Today, environmental concerns arise in the research and technology innovations in developing PUs, especially from vegetable polyols which are having an upsurge. These are driven by the uncertainty and fluctuations of petroleum crude oil price and availability. Jatropha has become a promising substituent to palm oil so as to reduce the competition of food and nonfood in utilizing this natural resource. Apart from that, jatropha will solve the problem related to the European banning of palm oil. Herein, we review the literature on the synthesis of PUs using different vegetable oils and compare it with jatropha oil and its nanocomposites reinforced with cellulose nanocrystals. Given the potential of vegetable oil PUs in many industrial applications, we expect that they will increase commercial interest and scientific research to bring these materials to the market soon.
Dihydroxystearic acid (DHSA) and its derivatives are hydroxyl fatty acids suitable to be used as multipurpose intermediates in the synthesis of personal care products and decorative cosmetics. In Malaysia, DHSA has been successfully produced from palm-based oleic acid, via epoxidation with per-formic acid followed with hydrolysis of the epoxide. The objective of this paper is to study the crystals of DHSA produced under different crystallization conditions. The crystal habit and morphology were observed in terms of scanning electron microscopy (SEM) and X-ray diffraction (XRD). Results show that solvent type, solvent concentration and cooling mode affect the crystal habit but not the morphology. The DHSA crystals agglomerated into either sphere-like or plate-like habit structure while always maintaining the triclinic crystal system.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.