Multi-walled carbon nanotubes (MWNTs) were used to prepare natural rubber (NR) nanocomposites. Our first effort to achieve nanostructures in MWNTs/NR nanocomposites were formed by incorporating carbonnanotubes in a polymer solution and subsequently evaporating the solvent. Using this technique, nanotubess can be dispersed homogeneously in the NR matrix in an attempt to increase the mechanical properties of these nanocomposites. The properties of the nanocomposites such as tensile strength, tensile modulus, tear strength, elongation at break and hardness were studied. Mechanical test results show an increase in the initial modulus for up to 12 times in relation to pure NR. In addition to mechanical testing, the dispersion state of the MWNTs into NR was studied by transmission electron microscopy (TEM) in order to understand the morphology of the resulting system. According to the present study, application of the physical and mechanical properties of carbon nanotubes to NR can result in rubber products which have improved mechanical, physical and chemical properties, compared with existing rubber products reinforced with carbon black or silicone.
A floating catalyst chemical vapor deposition (FC-CVD) method was designed and fabricated to produce high-quality and-quantity carbon nanotubes. The design parameters like the hydrogen flow rate; reaction time and reaction temperature were optimized to produce high yield and purity of Multi-Wall Carbon Nanotubes (MWCNTs). Multi-Walled Carbon Nanotubes (MWNTs) were used to prepare natural rubber (NR) nanocomposites. Our first efforts to achieve nanostructures in MWNTs/styrene butadiene rubber (SBR) nanocomposites were formed by incorporating carbon nanotubes in a polymer solution and subsequently evaporating the solvent. Using this technique, nanotubes can be dispersed homogeneously in the NR matrix in an attempt to increase the mechanical properties of these nanocomposites. The properties of the nanocomposites such as tensile strength, tensile modulus, elongation at break and hardness were studied. Using different percentages of carbon nanotubes from 1 wt% to 10 wt%, several nanocomposites samples were fabricated. Significant improvements in the mechanical properties of the resulting nanocomposites showed almost 10% increase in the Young's modulus for 1 wt% of CNTs and up to around 200% increase for 10 wt% of CNTs.
Multi-walled carbon nanotubes (MWNTs) were used to prepare natural rubber (NR) nanocomposites. Our first effort to achieve nanostructures in MWNTs/NR nanocomposites were formed by incorporating carbonnanotubes in a polymer solution and subsequently evaporating the solvent. Using this technique, nanotubess can be dispersed homogeneously in the NR matrix in an attempt to increase the mechanical properties of these nanocomposites. The properties of the nanocomposites such as tensile strength, tensile modulus, tear strength, elongation at break and hardness were studied. Mechanical test results show an increase in the initial modulus for up to 12 times in relation to pure NR. In addition to mechanical testing, the dispersion state of the MWNTs into NR was studied by transmission electron microscopy (TEM) in order to understand the morphology of the resulting system. According to the present study, application of the physical and mechanical properties of carbon nanotubes to NR can result in rubber products which have improved mechanical, physical and chemical properties, compared with existing rubber products reinforced with carbon black or silicone.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.