Hydrogels are macromolecular networks able to absorb and release water solutions in a reversible manner, in response to specific environmental stimuli. Such stimuli-sensitive behaviour makes hydrogels appealing for the design of ‘smart’ devices, applicable in a variety of technological fields. In particular, in cases where either ecological or biocompatibility issues are concerned, the biodegradability of the hydrogel network, together with the control of the degradation rate, may provide additional value to the developed device. This review surveys the design and the applications of cellulose-based hydrogels, which are extensively investigated due to the large availability of cellulose in nature, the intrinsic degradability of cellulose and the smart behaviour displayed by some cellulose derivatives.

This work is focused on the preparation of new environmentally friendly hydrogels derived from cellulose and hence originating from renewable resources and characterized by biodegradable properties. Two cellulose derivatives, sodium carboxymethylcellulose (CMCNa) and hydroxyethylcellulose (HEC), were used for superabsorbent hydrogel preparation. Citric acid (CA), a crosslinking agent able to overcome toxicity and costs associated with other crosslinking reagents, was selected in a heat activated reaction. Differential scanning calorimeter (DSC), fourier transform infrared spectroscopy (FTIR), and swelling measurements were performed during the reaction progress to investigate the CA reactivity with each of the polymers. Also, CMCNa/HEC polymer mixtures (3/1 w/ w) crosslinked with CA were investigated and compared with previous results. Finally, a possible reaction mechanism was proposed.

Wound closure represents a primary goal in the treatment of very deep and/or large wounds, for which the mortality rate is particularly high. However, the spontaneous healing of adult skin eventually results in the formation of epithelialized scar and scar contracture (repair), which might distort the tissues and cause lifelong deformities and disabilities. This clinical evidence suggests that wound closure attained by means of skin regeneration, instead of repair, should be the true goal of burn wound management. The traditional concept of temporary wound dressings, able to stimulate skin healing by repair, is thus being increasingly replaced by the idea of temporary scaffolds, or regenerative templates, able to promote healing by regeneration. As wound dressings, polymeric hydrogels provide an ideal moisture environment for healing while protecting the wound, with the additional advantage of being comfortable to the patient, due to their cooling effect and non-adhesiveness to the wound tissue. More importantly, recent advances in regenerative medicine demonstrate that bioactive hydrogels can be properly designed to induce at least partial skin regeneration in vivo. The aim of this review is to provide a concise insight on the key properties of hydrogels for skin healing and regeneration, particularly highlighting the emerging role of hydrogels as next generation skin substitutes for the treatment of full-thickness burns.

The present work deals with the development of a biodegradable superabsorbent hydrogel, based on cellulose derivatives, for the optimization of water resources in agriculture, horticulture and, more in general, for instilling a wiser and savvier approach to water consumption. The sorption capability of the proposed hydrogel was firstly assessed, with specific regard to two variables that might play a key role in the soil environment, that is, ionic strength and pH. Moreover, a preliminary evaluation of the hydrogel potential as water reservoir in agriculture was performed by using the hydrogel in experimental greenhouses, for the cultivation of tomatoes. The soil-water retention curve, in the presence of different hydrogel amounts, was also analysed. The preliminary results showed that the material allowed an efficient storage and sustained release of water to the soil and the plant roots. Although further investigations should be performed to completely characterize the interaction between the hydrogel and the soil, such findings suggest that the envisaged use of the hydrogel on a large scale might have a revolutionary impact on the optimization of water resources management in agriculture.

Understanding the relationships between material surface properties and cellular responses is essential to designing optimal material surfaces for implantation and tissue engineering. In this study, cellulose hydrogels were crosslinked using a non-toxic and natural component namely citric acid. The chemical treatment induces COOH functional groups that improve the hydrophilicity, roughness, and materials rheological properties. The physiochemical, morphological, and mechanical analyses were performed to analyze the material surface before and after crosslinking. This approach would help determine if the effect of chemical treatment on cellulose hydrogel improves the hydrophilicity, roughness, and rheological properties of the scaffold. In this study, it was demonstrated that the biological responses of human mesenchymal stem cell with regard to cell adhesion, proliferation, and differentiation were influenced in vitro by changing the surface chemistry and roughness.

The main aim of this work is the synthesis and characterization of cross-linked chitosan systems. Chitosan hydrogels can be prepared by physical or chemical cross-linking of polymer chains. Chemical cross-linking, leading to the creation of hydrogel networks possessing improved mechanical properties and chemical stability, can be achieved using either synthetic agents or naturalbased agents. In this work, the cross-linker Genipin, a naturally derived compound, was selected because of the lower acute toxicity compared to many other commonly used synthetic cross-linking reagents. In particular, the chemical stabilization of chitosan through genipin cross-linking molecules was performed and characterized by calorimetric analyses (differential scanning calorimetry), swelling measurements in different pHs, and ionic strength. The reaction kinetics was carried out by means of rheological measurements, and both the activation energy (E a ) and the reaction order (m) were calculated. The hydrogel analyses were carried out at different concentrations of genipin (GN1 and GN2). The results were used to evaluate the possibility to use the chemical cross-linked chitosangenipin hydrogel for biomedical applications.

Genipin (GN) is a natural molecule extracted from the fruit of Gardenia jasminoides Ellis according to modern microbiological processes. Genipin is considered as a favorable cross-linking agent due to its low cytotoxicity compared to widely used cross-linkers; it cross-links compounds with primary amine groups such as proteins, collagen, and chitosan. Chitosan is a biocompatible polymer that is currently studied in bone tissue engineering for its capacity to promote growth and mineral-rich matrix deposition by osteoblasts in culture. In this work, two genipin cross-linked chitosan scaffolds for bone repair and regeneration were prepared with different GN concentrations, and their chemical, physical, and biological properties were explored. Scanning electron microscopy and mechanical tests revealed that nonremarkable changes in morphology, porosity, and mechanical strength of scaffolds are induced by increasing the cross-linking degree. Also, the degradation rate was shown to decrease while increasing the crosslinking degree, with the high cross-linking density of the scaffold disabling the hydrolysis activity. Finally, basic biocompatibility was investigated in vitro, by evaluating proliferation of two human-derived cell lines, namely, the MG63 (human immortalized osteosarcoma) and the hMSCs (human mesenchymal stem cells), as suitable cell models for bone tissue engineering applications of biomaterials.

In this work, an innovative cellulose-based superabsorbent polymer (SAP) was experimentally assessed as an environmentally friendly alternative to acrylate-based SAPs, for the optimization of water consumption in agriculture. The cellulose-based SAP was synthesized and tested for its swelling capability in different aqueous media. The effectiveness of the SAP in agricultural applications was then evaluated by analyzing its performance after several absorption/desorption cycles, over a period of approximately 80 days, upon addition to different types of soil, i.e., white and red soil, for the cultivation of two varieties of plants typical of the Mediterranean area (tomatoes and chicory). The results confirmed that SAP-amended soil can store a considerable amount of water and can release it gradually to the plant roots when needed. The adoption of the proposed SAP in cultivations could thus represent a promising solution for the rationalization of water resources, especially in desert areas.