Penelitian ini tentang pemanfaatan karbon aktif ampas tebu sebagai media adsorpsi untuk menurunkan kandungan zat besi dan kesadahan pada air sumur gali. Tujuan penelitian untuk menentukan suhu karbonasi dan konsentrasi CaCO yang paling optimum untuk pembuatan karbon aktif serta mengkaji efektifitasnya dalam menurunkan kadar logam Fe dan kesadahan. Penelitian ini terdiri atas dua tahap, tahap pertama menentukan kondisi optimum karbon aktif berdasarkan SNI 06-3730-1995 yang didasarkan pada suhu karbonasi dan konsentrasi CaCO3 tahap kedua penggunaan karbon aktif dalam penyerapan logam Fe dan kesadahan berdasarkan ketinggian media. Pengukuran kadar Fe3+ menggunakan spektrofotometer, sedangkan pengukuran kesadahan dengan menggunakan titrimeteri EDTA. Hasil penelitian menunjukkan konsentrasi CaCO3 5,5.10-5 M dan suhu karbonasi 3500C paling optimum untuk menghasilkan karbon aktif paling sesusai SNI 06-3730-1995. Serapan optimum pada waktu operasi 2 jam pada media karbonaktif ampas tebu dengan tinggi 60 cm dapat menurunkan Fe sebesar 88% dan kesadahan 60%. Kata Kunci : Adsorpsi, Ampas Tebu, Besi, Karbon Aktif, Kesadahan.
Dalam proses pengisian aki (charging) dengan sumber listrik yang berasal dari sel surya,tentunya diperlukan sebuah alat kontrol yang berfungsi mengatur sistem pengisian energi listrikyang biasa disebut charge controller atau kontrol pengisian. Pada aplikasinya, kadangkalapenggunaan alat kontrol pengisian tersebut masih terdapat kekurangan, diantaranya ialah alattersebut hanya dapat digunakan untuk pengisian aki dengan tegangan 12 dan 24 volt saja.Sehingga jika digunakan untuk tegangan yang lebih tinggi dari itu, maka diperlukan modifikasisistem pengisian yang sesuai dengan kebutuhan. Penelitian ini merupakan studi kasus pada sistem pengisian aki (charging) mobil listrik BimoBaskoro yang menggunakan sumber listrik dari sel surya. Pada mobil ini terdapat aki dengan totaltegangan 48 volt dengan sumber listrik dari panel surya berkapasitas 100 WP. Penelitian inibertujuan untuk mendapatkan sistem pengisian aki yang efisien. Sistem yang coba diterapkanadalah dengan metode sequensial. Yakni pengisian dengan cara bergantian satu persatu sampaikondisi kapasitas aki penuh dengan dikontrol alat yang telah diprogram untuk bekerja secaraotomatis. Dari hasil penelitian yang telah dilakukan, didapatkan bahwa penggunaan metode ini dapatdiaplikasikan untuk kontrol pengisian aki pada mobil listrik Bimo Baskoro dengan keunggulandapat melakukan pengisian aki 48 volt dengan sumber tegangan 12 volt dari energi listrik yangdihasilkan sel surya.
Bioplastik adalah plastik atau polimer yang secara alamiah dapat dengan mudah terdegradasi baik terurai oleh mikroorganisme sehingga dapat menjadi alternatif pengganti plastik komersial. Penelitian ini bertujuan untuk memanfaatkan limbah tongkol jagung manis (Zea Mays L Saccharata) sebagai bahan dasar pembuatan bioplastik dengan penambahan variasi penguat ZnO dan gliserol sebagai platicizer. Penelitian ini dilakukan dalam beberapa tahap, yaitu preparasi bahan, pembuatan pulp, pembuatan bioplastik dengan variasi konsentrasi ZnO (3%, 6%, 9%) dan gliserol (25%, 30%, 35%), serta karakteristik bioplastik. Bioplastik yang dihasilkan dari berbagai perbandingan ZnO dan gliserol memiliki karakterisitik yang berbeda-beda. Analisis gugus fungsi, tidak ditemukan adanya gugus fungsi baru dalam bioplastik dibandingkan terhadap gugus fungsi yang ada pada bahan pembentuknya. Hasil analisis sifat mekanik bioplastik menunjukkan bahwa semakin besar konsentrasi ZnO maka nilai kuat tarik bioplastik akan meningkat sedangkan nilai elongasi bioplastik akan menurun. Semakin besar konsentrasi gliserol maka nilai elongasi bioplastik akan meningkat sedangkan nilai kuat tarik bioplastik akan menurun. Bioplastik dengan konsentrasi 35% gliserol mempunyai tingkat presentase penurunan degradibilitas lebih tinggi dibandingkan dengan konsentrasi gliserol 25% dan 30%. Dari hasil penelitian ini dapat disimpulkan bahwa komposisi paling baik untuk pembuatan bioplastik berbahan dasar limbah tongkol jagung manis dengan penambahan penguat ZnO dan plasticizer gliserol adalah 9% ZnO dan 30% gliserol.
Parameter air bersih di indonesia diatur menurut peraturan menteri kesehatan Republik Indonesia nomor : 416/Menkes/Per/IX/1990. Penelitian ini mengkaji kemampuan penurunan parameter parameter Total Disolved Solid (TDS), kekeruhan, kesadahan total (total hardness), khlorida, Mangan, dan Total Coliform (e koli) dengan menggunakan perlakuan koagulan, filtrasi, ferrolite, manganese greensand, dan resin pada air. Metode yang digunakan adalah : proses pengolahan bahan baku air diawali dengan pembubuhan Sucolite SP 211 sebagai Coagulant Aid pada tanki koagulan, kemudian treatment filtrasi menggunakan sedimen poly propilena (SPP) pada housing filter. Selanjutnya berturut turut treatment ; Ferrolite dan Manganese Greensand pada housing filter, resin anion pada tabung FRP, dan resin kation pada tabung FRP. Kesimpulan : Treatment koagulan, filtrasi, ferrolite, manganese greensand, dan resin pada air baku dapat menurunkan ; Total Disolved Solid (TDS) 1.360 mg / L, kekeruhan sebesar 6,3 skala Turbidity NTU, kesadahan total (total hardness) 265,634 mg / L CaCO3, khlorida 292,878 mg / L Cl -, Mangan 1,235 mg/L Mn, dan Total Coliform (e koli) 3.140 MPN/100mL
World Science and Technology especially at for computer have giving many amenity all area because it’s operation very practical, efficient and easily. In this research of the peripheral of computer used as by media depicting the level of value measurement of direct current from an external electronics network which interfaced to computer pass to port of parallel. Expected with ampere meter of dc use ADC 0804 as interface at central processing unit (CPU) can assist process read of measurement value and can be used also by other consumer in the world of education. The method which is used in this research is descriptive research have the character of developmental, where examination of its data is compared to a standard or criterion which have been specified before when compilation of research design. The result of this research indicate that a software of Delphi version 7.0 from Borland can be used to connect between hardware and software by using components are staying in its environment. The level of comparison between ampere meter of dc use ADC 0804 as interface at central processing unit (CPU) by conventional analog ampere meter equals to 1:1. Ampere meter of dc use ADC 0804 as interface at Central Processing Unit (CPU) have comparison which is equal to conventional analog ampere meter so that ampere meter of dc use ADC 0804 as interface at Central Processing Unit (CPU) have reliable.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.