Parameter air bersih di indonesia diatur menurut peraturan menteri kesehatan Republik Indonesia nomor : 416/Menkes/Per/IX/1990. Penelitian ini mengkaji kemampuan penurunan parameter parameter Total Disolved Solid (TDS), kekeruhan, kesadahan total (total hardness), khlorida, Mangan, dan Total Coliform (e koli) dengan menggunakan perlakuan koagulan, filtrasi, ferrolite, manganese greensand, dan resin pada air. Metode yang digunakan adalah : proses pengolahan bahan baku air diawali dengan pembubuhan Sucolite SP 211 sebagai Coagulant Aid pada tanki koagulan, kemudian treatment filtrasi menggunakan sedimen poly propilena (SPP) pada housing filter. Selanjutnya berturut turut treatment ; Ferrolite dan Manganese Greensand pada housing filter, resin anion pada tabung FRP, dan resin kation pada tabung FRP. Kesimpulan : Treatment koagulan, filtrasi, ferrolite, manganese greensand, dan resin pada air baku dapat menurunkan ; Total Disolved Solid (TDS) 1.360 mg / L, kekeruhan sebesar 6,3 skala Turbidity NTU, kesadahan total (total hardness) 265,634 mg / L CaCO3, khlorida 292,878 mg / L Cl -, Mangan 1,235 mg/L Mn, dan Total Coliform (e koli) 3.140 MPN/100mL
Uap panas merupakan sumber utama dalam mengolah produksi, aliran pipa uap panas selaludipengaruhi udara bebas, karena itu harus dilakukan pemilihan bahan isolasi jenis mineral wool,calcium silicate dan ceramic fiber blanket dengan membuat model simulasi untuk menentukanbahan yang paling tepat dalam mengurangi kehilangan panas. Analisa dilakukan denganmenghitung jumlah kehilangan panas tanpa menggunakan bahan isolasi dan menggunakanisolasi dengan ketebalan bervariabel. Proses analisa dilakukan pada suhu 150 ºC dengan hasilisolasi mineral wool tebal 25 mm sebesar 5.714 watt, tebal 50 mm sebesar 3.489 watt dan tebal75 mm sebesar 2.633 watt. Sedangkan hasil isolasi calsium silicate tebal 25 mm sebesar 7.774watt, tebal 50 mm sebesar 4.913 watt dan tebal 75 mm sebesar 3.756 watt. Sedangkan hasilisolasi ceramic fiber blanket tebal 25 mm sebesar 6.756 watt, tebal 50 mm sebesar 4.197 watt dantebal 75 mm sebesar 3.188 watt. Bahan isolasi mineral wool memiliki hasil terbaik dibandingkancalcium silicate dan ceramic fiber blanket. Kesimpulan pemilihan bahan isolasi dipengaruhi nilaitermal konduktivitas dan tebal bahan.
Pembuatan jeruji sangkar burung secara manual sangat tidak efektif dan efisien karena membutuhkan waktu yang lama dan presisi yang rendah serta keseragaman ukuran tidak akurat. Metode yang digunakan saat penelitian adalah quality function development dimana metode tersebut digunakan untuk menentukan desain serta spesifikasi mesin yang sesuai dengan keinginan atau permintaan konsumen guna mendapatkan hasil yang sesuai keinginan konsumen. Teknik analisa penelitian ini menggunakan independent sampel t-test comperative dengan menggunakan aplikasi SPSS pada komputer. Metode independen sample t-test adalah metode atau prosedur yang digunakan untuk membandingkan rata-rata dua variabel dalam satu grup, artinya ini berguna untuk melakukan pengujian terhadap dua sampel yang berpasangan. Berdasarkan hasil uji independent sampel t-test comperative bahwa ad perubahan yang menonjol pada waktu penyerutan antara penyerutan secara manual dengan menggunakan mesin penyerut otomatis. Probabilitas (sig) 0,000 < 0,05 maka Ho ditolak, atau rata-rata hasil waktu dalam penyerutan bambu secara manual dengan secara otomatis berbeda signifikan. Artinya hasil waktu penyerutan secara manual lebih lama dibandingkan dengan waktu menggunakan otomatis. Dalam pengujian penyerutan bambu dengan panjang 60 cm secara manual rata-rata waktu terhitung 344.1 detik sedangkan menggunakan mesin irat bambu rata-rata waktu terhitung 233.3 detik. Mesin irat bambu ini perlu di kembangkan lagi sesuai denganperkembangan di era modern ini.
Dalam proses pembuatan rumah atau gedung sudah tentu membutuhkan material ataubahan bangunan. Salah satu material yang digunakan dalam proses pembuatan tersebut adalahpasir. Pasir merupakan material yang tidak bisa dipisahkan dari dunia industry perumahan ataubangunan. Pasir ini dicampur dengan semen untuk proses pembuatan cor tiang maupun dindingtembok. Pasir yang dimaksud disini adalah pasir yang siap dipakai, pasir yang diambil langsungmasirh tercampur dengan kerikil dan bebatuan. Dalam hal ini penelitian ini difokuskan padapengayakan pasir dari pengayakan konvensional ke pengayakan dengan menggunakan mesin.rancangan pembuatan mesin pengayak pasir untuk meningkatkan produktifitas kerja operator.Seberapa besar penggunaan mesin ini untuk meningkatkan produktifitas kerja operator mesinpengayak pasir. Berdasarkan hasil penelitian ini bahwa produktifitas kerja opertaor mesinpenyayak pasir mengalami peningkatan dibandingkan dengan menggunakan cara konvensional.Adapun uji ini lakukan dengan menggunakan penghitungan waktu tahap pertama pasir 10 kgwaktu yang dibutuhkan 8 menit: 4 menit dengan opertor 2:1 orang dari analisa tersebutbahawa terdapat peningkatan produktifitas denga nilai penghematan ½ dibandingkan denganpengayakan konvensioanal dan ini dapat mengurangi biaya tenaga kerja kerena menggunakan 1opertor.
This research was carried out at PT. Kayu Mebel Indonesia, Semarang. The company in this wood processing area has a production form that is elongated to the factory shape so that production is less than optimal. So it is necessary to revise the production layout by applying the Rank Order Cluster Algorithm (ROCA) and Similarity Coefficient (SC) methods, both of which are used to obtain a factory layout scheme that produces maximum production in order to achieve minimum back trafficking values. In order to know the forward and backward scores obtained through analysis from to chart. The results of the study obtained forward results which were originally 70.4% to 83.1% or an increase in the forward value of 12.7% from the initial layout. As for the backtracking value which was originally 29.6% to 16.9% or a decrease in the backtracking value of 12.7% from the initial layout. The results of the initial spacing of 1562.83 meters became 1466.37 meters or experienced a 7% savings from the previous layout. As for material handling costs, which were originally Rp. 760,280, - to Rp. 690,314, - or experienced a 7% savings from the previous layout
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.