Dalam proses pengisian aki (charging) dengan sumber listrik yang berasal dari sel surya,tentunya diperlukan sebuah alat kontrol yang berfungsi mengatur sistem pengisian energi listrikyang biasa disebut charge controller atau kontrol pengisian. Pada aplikasinya, kadangkalapenggunaan alat kontrol pengisian tersebut masih terdapat kekurangan, diantaranya ialah alattersebut hanya dapat digunakan untuk pengisian aki dengan tegangan 12 dan 24 volt saja.Sehingga jika digunakan untuk tegangan yang lebih tinggi dari itu, maka diperlukan modifikasisistem pengisian yang sesuai dengan kebutuhan. Penelitian ini merupakan studi kasus pada sistem pengisian aki (charging) mobil listrik BimoBaskoro yang menggunakan sumber listrik dari sel surya. Pada mobil ini terdapat aki dengan totaltegangan 48 volt dengan sumber listrik dari panel surya berkapasitas 100 WP. Penelitian inibertujuan untuk mendapatkan sistem pengisian aki yang efisien. Sistem yang coba diterapkanadalah dengan metode sequensial. Yakni pengisian dengan cara bergantian satu persatu sampaikondisi kapasitas aki penuh dengan dikontrol alat yang telah diprogram untuk bekerja secaraotomatis. Dari hasil penelitian yang telah dilakukan, didapatkan bahwa penggunaan metode ini dapatdiaplikasikan untuk kontrol pengisian aki pada mobil listrik Bimo Baskoro dengan keunggulandapat melakukan pengisian aki 48 volt dengan sumber tegangan 12 volt dari energi listrik yangdihasilkan sel surya.
Proses ironing merupakan salah satu proses metal forming. Aplikasi dari proses ini diantaranya pada proses pembuatan selongsong peluru, dimana ketinggian dari dinding tergantung pada reduksi ketebalan yang digunakan. Pada penelitian ini dilakukan simulasi untuk mengetahui berapakan ketinggian dinding berdasarkan variasi reduksi ketebalan dinding sehingga didapatkan ketinggian yang sesuai dengan kebutuhan dalam pembuatan selonsong peluru. Material yang digunakan untuk selongsong peluru kaliber 20 mm adalah kuningan Cu30% Zn 70% berbentuk cup diameter luar awal 33,5 mm, tebal 3 mm dan tinggi 37 mm. Berdasarkan perhitungan kekuatan material, maka didapat reduksi ketebalan dinding maksimum yang diijinkan pada proses ironing adalah 26,7%. Selanjutnya dengan reduksi tersebut dilakukan simulasi menggunakan metode elemen hingga pada variasi sudut die α = 5ᵒ, 10ᵒ, 15ᵒ, 20ᵒ dan 25ᵒ. Hasil simulasi proses ironing pada masing-masing sudut die α dan prosentase reduksi ketebalan dinding 26,7%, menunjukkan, bahwa selongsong peluru belum dapat melawati die. Setelah dilakukan penambahan gaya pada proses simulasi dan dengan variasi reduksi 5%,10%,15%, 20% dan 25%, menghasilkan untuk reduksi 5% :39mm ,10% : 42mm ,15% : 45mm, 20% :51mm dan 25% : 55mm.
Perkembangan teknologi dan industri saat ini menunjukkan peningkatan yang sangat pesatseiring dengan pertumbuhan ekonomi. Untuk menghadapi perdagangan bebas dan persainganekonomi setiap perusahaan dituntut untuk menghasilkan produk yang memiliki kualitas yang baik. Dengan menggunakan metode eksperimen yang bersifat developmental (berkembang)penelitian ini bertujuan untuk membuat alat pendeteksi logam (metal detector) untuk industri makanan menggunakan PLC. Alat ini bisa mendeteksi dan mengambil logam dan dipisahkan dari bahan makanan. Pengendalian yang dilakukanPLC ini meliputi pengendalian motor–motor penggerak dan indikator berupa buzzer yangdidasarkan pada input atau masukan dari rangkaiansensor logam dan limit switch. Dengan proses pendeteksian yang dilakukan alat ini maka dapat dijadikan parameter dalam peningkatan mutu produk-produk industri khususnya dalam industri makanan. Sehingga para konsumen bisa merasa aman dan tidak dirugikan.
The development of renewable energy is growing rapidly along with technological developments. One application of renewable energy is hydroelectric power (Water Turbine Generator). This study aims to design and manufacture a MHP using a permanent magnet generator with a screw type turbine and determine the output power generated from a MHP generator using a screw type turbine. In this research, an efficient and efficient MHP with screw type turbine will be developed. This research will be implemented in Doplang Tretek, Prambon Subdistrict, Sidoarjo Regency. MHP is a power plant whose driving force comes from water flowing from the highlands to the lowlands. By utilizing the water discharge PLTMH can function to produce electricity which is driven through a turbine and rotates a generator. The main components of MHP are turbine, generator, and water discharge. If one of these components is not present, the MHP cannot function. By utilizing MHP we can enjoy electricity for free, the power generated by MHP is still small <0.5-100kW. From the design of the PLTMH generator using a screw type turbine the output voltage is 9 volts with a water flow of 557 m3/s. The greater the flow of water flowing in the cross section of the turbine, the faster the resulting rpm.
To turn on and turn off lights in the mosque area in general still use a manual system that is to turn off and turn on the lights using a switch located on the wall. Therefore, currently a system that has been designed automatically is needed to control the light of life and the outages of lights based on a predetermined time and based on the detection of human presence, so that the lights will turn on and off automatically at the set time according to needs, namely using Real Time Clock (RTC) and Passive Infrared Receiver (PIR) sensors. The results obtainedin the form of a light controller system in the area of the mosque using DS3231 RTC and Arduino Nano At mega 328P PIR Sensor. At 3:00 and 17:00 the condition of the lights is on and at 05:30 and 21:00 the lights are off. For the measurement of PIR sensor detection distance, the distance of 5 meters of the PIR sensor can still detect the presence of human movements, after 5 meters or even 6 meters of the PIR sensor cannot detect human movement. So that within a distance of 6 meters or more, the toilet lights cannot turn on automatically or turn off.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.