The maintenance and safety of ancient bridges is a major concern of governmental authorities. In particular, the safety of old riveted bridges fabricated and placed into service at the end of the 19th century deserves particular attention. These structures are susceptible to exhibit high fatigue damage levels due to their long operational period with increasing traffic intensity associated to an original design not covering the fatigue phenomenon. This paper reviews recent fatigue behaviour investigations on single and double shear riveted joints performed by Universities of Porto (Portugal), Trás-os-Montes e Alto Douro (Portugal), and Wrocław (Poland), in particular concerning the fatigue characterization of riveted joints extracted from representative Portuguese riveted bridges, namely the Eiffel, Luiz I, Fão, Pinhão and Trezói bridges. In order to overcome the influence of scatter and establish a reliable assessment for the obtained experimental data, two statistical approaches were used: implement linearized boundaries following the recommendation in ASTM E739 standard and defining probabilistic SeN fields using the Castillo & Fernández-Canteli model. This statistical analysis allows to propose design SeN curves for single and double riveted joints and evaluate the applicability (safety) of using the design curves suggested in Eurocode 3 as well as design curves proposed by Taras and Greiner.

In North America and Europe, there is a significant number of centenary metallic bridges that require maintenance and strengthening operations. These structures need to be adapted to increasing traffic intensities, and their structural integrity should be constantly evaluated. Fatigue damages were not considered in the original design of old metallic bridges, and riveted connections are one of the most frequent sources of fatigue damages on these structures. This paper intends to be a contribution for the reliable assessment of the fatigue behavior of riveted connections by proposing S-N curves for these structural details. Experimental fatigue data is analyzed from multiple bridges across Europe, and different statistical methods were implemented. A normal distribution function was implemented following the ISO 12107 standard, and the results were compared with the implementation of the two-parameter Weibull distribution function. Different estimation methodologies were implemented to determine the parameters of the Weibull distribution. S-N curves obtained by the statistical analysis were then compared with design recommendations from North American and European standards.

The paper deals with the subject of diagnostics and the quick repairs of long-term operated metallic materials. Special attention was paid to historical materials, where the structure (e.g., puddle iron) is different from modern structural steels. In such materials, the processes of microstructural degradation occur as a result of several decades of exposure, which could overpass 100 years. In some cases, their intensity can be potentially catastrophic. For this reason, the search for minimally invasive diagnostic methods is ongoing. In this paper, corrosion and fracture toughness tests were conducted, and the results of these studies were presented for two material states: post-operated and normalized (as a state “restoring” virgin state). Moreover, through the use of modern numerical methods, composite crack-resistant patches have been designed to reduce the stress intensity factors under cyclic loads. As a result, fatigue lifetime was extended (propagation phase) by more than 300%.

The behaviour of standard bolted steel connections submitted to monotonic loads, through the use of numerical models, is presented in the current paper. The bolted connections allow speed up constructive processes in an increasingly competitive and globalized world in which the costs are a decisive factor in the development of a project. The use of computational tools in the analysis of bolted connections becomes determinant, mainly for new solutions or solutions less explored in terms of design codes. Throughout the years, bolted connections have been suffering transformations resulting from research activities performed by many authors. Rivets have been replaced by bolts, the main achievement being the pre-stressed bolts. Methodologies based on finite element analyses were proposed for double shear bolted connection. The non-linear behaviour of these connections is investigated and their performances are compared. In the numerical modelling of the bolted connection, linear elastic and elastoplastic analyzes reveal that there are two slip levels associated with local non-linearities caused by the contact pairs, which vary with clamping stresses.

No abstract

No abstract

In Portugal there is a number of old metallic riveted railway and highway bridges that were erected by the end of the 19 th century and beginning of the 20 th century, and are still in operation, requiring inspections and remediation measures to overcome fatigue damage. Residual fatigue life predictions should be based on actual fatigue data from bridge materials which is scarce due to the material specificities. Fatigue crack propagation data of materials from representative Portuguese riveted bridges, namely the Pinhão and Luiz I road bridges, the Viana road/railway bridge, the Fão road bridge and the Trezói railway bridge were considered in this study. The fatigue crack growth rates were correlated using the Paris's law. Also, a statistical analysis of the pure mode I fatigue crack growth (FCG) data available for the materials from the ancient riveted metallic bridges is presented. Based on this analysis, design FCG curves are proposed and compared with BS7910 standard proposal, for the Paris region, which is one important fatigue regime concerning the application of the Fracture Mechanics approaches, to predict the remnant fatigue life of structural details.

No abstract