The problem of two-dimensional steady laminar MHD boundary layer flow past a wedge with heat and mass transfer of nanofluid embedded in porous media with viscous dissipation, Brownian motion, and thermophoresis effect is considered. Using suitable similarity transformations, the governing partial differential equations have been transformed to nonlinear higher-order ordinary differential equations. The transmuted model is shown to be controlled by a number of thermophysical parameters, viz. the pressure gradient, magnetic, permeability, Prandtl number, Lewis number, Brownian motion, thermophoresis, and Eckert number. The problem is then solved numerically using spectral quasilinearization method (SQLM). The accuracy of the method is checked against the previously published results and an excellent agreement has been obtained. The velocity boundary layer thickness reduces with an increase in pressure gradient, permeability, and magnetic parameters, whereas thermal boundary layer thickness increases with an increase in Eckert number, Brownian motion, and thermophoresis parameters. Greater values of Prandtl number, Lewis number, Brownian motion, and magnetic parameter reduce the nanoparticles concentration boundary layer.
This article deals with carbon nanoliquid flow due to stretchable rotating disk with the effect of Cattaneo–Christov heat flux model. Both SWCNTs and MWCNTs are considered with ethylene glycol as the base fluid. The effects of nanoparticle volume friction, normally applied magnetic field, stretching factor, velocity, and thermal slip factors are examined. The fundamental flow governing equations are transformed into dimensionless system of coupled nonlinear ordinary differential equations, and they are solved numerically using spectral quasi-linearization method (SQLM). Employing graphs and tables, the results of velocity and temperature fields as well as skin friction coefficient and local heat transfer rate are analyzed and presented via embedded parameters. The results reveal that higher velocity fields and lower temperature fields are noticed in the MWCNT nanofluids than SWCNT nanofluids. The higher incidence of magnetic field improves the thermal boundary layer thickness. A growth in velocity slip factor reduces the momentum boundary layer thickness of the nanoliquid flow. Generally, radial stretching of the disk is helpful in improving the cooling process of the rotating disk in practical applications.
This article deals with non‐Newtonian Casson nanofluid flow and heat transfer over stretching cylinder in a porous medium. The mode of heat transfer is presented considering temperature‐dependent thermal conductivity by integrating the Cattaneo–Christov heat flux and mass flux models. Boundary layer theory is applied to develop the governing partial differential equations from the physical problem. Employing proper similarity transformation, the governing boundary layer equations are transformed into dimensionless system of nonlinear ordinary differential equations. Then, the resulting problem is numerically solved by means of spectral relaxation method. The convergence analysis of the proposed numerical scheme is presented via a table, which confirms almost the 10th order of approximation is enough for the convergence of the skin friction coefficient, local heat transfer, and mass transfer rates. The effects of various embedded parameters on velocity, temperature, and concentration profiles as well as skin friction coefficient, surface heat and mass transfer rates are examined through graphs and tables. The findings reveal that the growth of permeability and velocity slip parameters appears to decelerate the velocity distributions of fluid. Thermal boundary layer thickness tends to develop with greater values of permeability and Brownian motion parameters. Also, the local heat transfer rate is less with Fourier's law of heat conduction than Cattaneo–Christov heat flux model. Furthermore, the validity and accuracy of the present result is checked with the available literature, and very sound agreement has been obtained.
This work analyzed the effects of variable viscosity and thermal conductivity, with mixed convection, thermal radiation and viscous dissipation effects, on multiwalled carbon nanotubes (MWCNTs)–aluminum oxide (Al2O3)/engine oil hybrid nanofluid flow due to a vertically inverted spinning cone embedded in a porous medium. Using suitable similarity transformation, the boundary layer fluid flow governing equations are transformed into dimensionless systems of coupled nonlinear ordinary differential equations. Then, the solutions are obtained numerically employing the spectral relaxation method. The influences of involved parameters are examined, and the results are presented with graphs and tables. The obtained results disclose that both the tangential and azimuthal skin friction coefficients increase with increasing values of temperature‐dependent viscosity and mixed convection parameters. The local heat transfer rate reduces with increasing values of the Eckert number and variable thermal conductivity parameter, whereas it enhances with greater values of the thermal radiation parameter. Generally, hybrid nanofluids of (MWCNTs–Al2O3)/engine oil show better flow distributions with good stability of thermal properties than MWCNTs/engine oil and Al2O3/engine oil mono‐nanofluids.
In this paper the problem of unsteady two-dimensional heat and mass transfer flow of nanofluid past a moving wedge is considered. The effects of nanoparticle volume fraction, viscous dissipation, chemical reaction, and convective boundary conditions are studied. The physical problem is modeled using partial differential equations. Using suitable similarity variables, the governing equations and their related boundary conditions are transformed into dimensionless forms of a system of coupled nonlinear ordinary differential equations. The resulting systems of equations are then solved numerically using spectral quasilinearization method (SQLM). The results reveal that the skin friction coefficient increases with increasing the values of nanoparticle volume fraction, unsteadiness and permeability parameters. The local Nusselt number reduces with increasing the value of nanoparticle volume fraction, Prandtl number and Eckert number. The local Sherwood number enhances with greater the value of nanoparticle volume fraction, unsteadiness, pressure gradient and chemical reaction parameters. Moreover, the method is checked against the previously published results and a very good agreement have been obtained.
This study deals with natural convection unsteady flow of CNTs − Fe 3 O 4 /water hybrid nanofluids due to stretching surface embedded in a porous medium. Both hybrid nanoparticles of SWCNTs − Fe 3 O 4 and MWCNTs − Fe 3 O 4 are used with water as base fluid. Effects of hybrid nanoparticles volume friction, second-order velocity slip condition, and temperature-dependent viscosity are investigated. The governing problem of flow is solved numerically employing spectral quasilinearization method (SQLM). The results are presented and discussed via embedded parameters using graphs and tables. The results disclose that the thermal conductivity of CNTs − Fe 3 O 4 / H 2 O hybrid nanofluids is higher than that of CNTs − H 2 O nanofluids with higher value of hybrid nanoparticle volume fraction. Also, the results show that momentum boundary layer reduces while the thermal boundary layer gros with higher values of temperature-dependent viscosity and second-order velocity slip parameters. The skin friction coefficient improves, and the local heat transfer rate decreases with higher values of nanoparticle volume fraction, temperature-dependent viscosity, and second-order velocity slip parameters. Furthermore, more skin friction coefficients and lower local heat transfer rate are reported in the CNTs − Fe 3 O 4 / H 2 O hybrid nanofluid than in the CNTs − H 2 O nanofluid. Thus, the obtained results are promising for the application of hybrid nanofluids in the nanotechnology and biomedicine sectors.
The present analysis is aimed at examining MHD micropolar nanofluid flow past a radially stretchable rotating disk with the Cattaneo-Christov non-Fourier heat and non-Fick mass flux model. To begin with, the model is developed in the form of nonlinear partial differential equations (PDEs) for momentum, microrotation, thermal, and concentration with their boundary conditions. Employing suitable similarity transformation, the boundary layer micropolar nanofluid flows governing these PDEs are transformed into large systems of dimensionless coupled nonlinear ordinary differential equations (ODEs). These dimensionless ODEs are solved numerically by means of the spectral local linearization method (SLLM). The consequences of more noticeable involved parameters on different flow fields and engineering quantities of interest are thoroughly inspected, and the results are presented via graph plots and tables. The obtained results confirm that SLLM is a stable, accurate, convergent, and computationally very efficient method to solve a large coupled system of equations. The radial velocity grows while the tangential velocity, temperature, and concentration distributions turn down as the value of the radial stretching parameter improves, and hence, in practical applications, radial stretching of the disk is helpful to advance the cooling process of the rotating disk. The occurrence of microrotation viscosity in microrotation parameters ( A 1 − A 6 ) declines the radial velocity profile, and the kinetic energy of the fluid is reduced to some extent far away from the surface of the disk. The novelty of the study is the consideration of microscopic effects occurring from the micropolar fluid elements such as micromotion and couple stress, the effects of non-Fourier’s heat and non-Fick’s mass flux, and the effect of radial stretching disk on micropolar nanofluid flow, heat, and mass transfer.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.