The high conversion efficiency has made metal halide perovskite solar cells a real breakthrough in thin film photovoltaic technology in recent years. Here, we introduce a straightforward strategy to reduce the level of electronic defects present at the interface between the perovskite film and the hole transport layer by treating the perovskite surface with different types of ammonium salts, namely ethylammonium, imidazolium and guanidinium iodide. We use a triple cation perovskite formulation containing primarily formamidinium and small amounts of cesium and methylammonium. We find that this treatment boosts the power conversion efficiency from 20.5% for the control to 22.3%, 22.1%, and 21.0% for the devices treated with ethylammonium, imidazolium and guanidinium iodide, respectively. Best performing devices showed a loss in efficiency of only 5% under full sunlight intensity with maximum power tracking for 550 h. We apply 2D- solid-state NMR to unravel the atomic-level mechanism of this passivation effect.

Chemical doping of inorganic–organic hybrid perovskites is an effective way of improving the performance and operational stability of perovskite solar cells (PSCs). Here we use 5-ammonium valeric acid iodide (AVAI) to chemically stabilize the structure of α-FAPbI3. Using solid-state MAS NMR, we demonstrate the atomic-level interaction between the molecular modulator and the perovskite lattice and propose a structural model of the stabilized three-dimensional structure, further aided by density functional theory (DFT) calculations. We find that one-step deposition of the perovskite in the presence of AVAI produces highly crystalline films with large, micrometer-sized grains and enhanced charge-carrier lifetimes, as probed by transient absorption spectroscopy. As a result, we achieve greatly enhanced solar cell performance for the optimized AVA-based devices with a maximum power conversion efficiency (PCE) of 18.94%. The devices retain 90% of the initial efficiency after 300 h under continuous white light illumination and maximum-power point-tracking measurement.

Engineering the chemical composition of inorganic–organic hybrid perovskite materials is an effective strategy to boost the performance and operational stability of perovskite solar cells (PSCs). Among the diverse family of ABX3 perovskites, methylammonium-free mixed A-site cation Cs x FA1–x PbI3 perovskites appear as attractive light-absorber materials because of their optimum band gap, superior optoelectronic property, and good thermal stability. Here, we develop a simple and very effective one-step solution method for the preparation of high-quality (Cs) x (FA)1–x PbI3 perovskite films upon the addition of excess CsCl to the FAPbI3 precursor solution. It is found that the addition of CsCl as a source of Cs cation instead of relevant addition of CsI to the parent perovskite solution increases effectively the grain size and film quality leading to improved charge mobility, reduced carrier recombination, and long carrier lifetime. The resultant mesoscopic perovskite devices exhibit a maximum efficiency of 20.60% with a stabilized power conversion efficiency of 19.85% and lower hysteresis compared to the reference device. This performance is among the highest reported for PSC devices incorporating mixed cation (Cs) x (FA)1–x PbI3 perovskites.

5-Ammonium valeric acid (AVA) is a frequently used additive in the preparation of lead halide perovskites. However, its microscopic role as passivating, cross-linking, or templating agent is far from clear. In this work, we provide density functional theory-based structural models for the Ruddlesden–Popper (RP) phases of AVA2(CH3NH3) n−1Pb n I3n+1 for n = 1, 2, and 3 and validate with experimental data on polycrystalline samples for n = 1. The structural and electronic properties of the AVA-based RP phases are compared to the ones of other linker families. In contrast to aromatic and aliphatic spacers without additional functional groups, the RP phases of AVA are characterized by the formation of a regular and stable H-bonding network between the carbonyl head groups of adjacent AVA molecules in opposite layers. Because of these additional interactions, the penetration depth of the organic layer into the perovskite sheet is reduced with direct consequences for its crystalline phase. The possibility of forming strong interlinker hydrogen bonds may lead to an enhanced thermal stability.

There is an ongoing surge of interest in the use of formamidinium (FA) lead iodide perovskites in photovoltaics due to their exceptional optoelectronic properties. However, thermodynamic instability of the desired cubic perovskite (α-FAPbI 3 ) phase at ambient conditions leads to the formation of a yellow non-perovskite (δ-FAPbI 3 ) phase that compromises its utility. A stable α-FAPbI 3 perovskite phase is achieved by employing benzylammonium iodide (BzI) and the microscopic structure is elucidated by using solid-state NMR spectroscopy and X-ray scattering measurements. Perovskite solar cells based on the FAPbI 3 (BzI) 0.25 composition achieve power conversion efficiencies exceeding 20%, which is accompanied by enhanced shelf-life and operational stability, maintaining 80% of the performance after one year at ambient conditions.