Hybrid
(organic–inorganic) multication lead halide perovskites
hold promise for a new generation of easily processable solar cells.
Best performing compositions to date are multiple-cation solid alloys
of formamidinium (FA), methylammonium (MA), cesium, and rubidium lead
halides which provide power conversion efficiencies up to around 22%.
Here, we elucidate the atomic-level nature of Cs and Rb incorporation
into the perovskite lattice of FA-based materials. We use 133Cs, 87Rb, 39K, 13C, and 14N solid-state MAS NMR to probe microscopic composition of Cs-, Rb-,
K-, MA-, and FA-containing phases in double-, triple-, and quadruple-cation
lead halides in bulk and in a thin film. Contrary to previous reports,
we have found no proof of Rb or K incorporation into the 3D perovskite
lattice in these systems. We also show that the structure of bulk
mechanochemical perovskites bears close resemblance to that of thin
films, making them a good benchmark for structural studies. These
findings provide fundamental understanding of previously reported
excellent photovoltaic parameters in these systems and their superior
stability.
Mixed-cation organic lead halide perovskites attract unfaltering attention owing to their excellent photovoltaic properties. Currently, the best performing perovskite materials contain multiple cations and provide power conversion efficiencies up to around 22%. Here, we report the first quantitative, cation-specific data on cation reorientation dynamics in hybrid mixed-cation formamidinium (FA)/methylammonium (MA) lead halide perovskites. We use N,H, C, andH solid-state MAS NMR to elucidate cation reorientation dynamics, microscopic phase composition, and the MA/FA ratio, in (MA)(FA)PbI between 100 and 330 K. The reorientation rates correlate in a striking manner with the carrier lifetimes previously reported for these materials and provide evidence of the polaronic nature of charge carriers in PV perovskites.
We show the incorporation of europium into CsPbI 2 Br inorganic perovskite lattice. With the optimization of the doping concentration of europium, we obtained a high power-conversion efficiency of 13.71%. We found that incorporation of europium reduces non-radiative recombination to achieve a high open-circuit voltage of 1.27 V. The exceptional stability of such a device was demonstrated by retaining 93% of the initial efficiency under 100 mW cm À2 continuous illumination for 370 hr.
Methylammonium (MA)- and formamidinium (FA)-based organic-inorganic lead halide perovskites provide outstanding performance as photovoltaic materials, due to their versatility of fabrication and their power conversion efficiencies reaching over 22%. The proposition of guanidinium (GUA)-doped perovskite materials generated considerable interest due to their potential to increase carrier lifetimes and open-circuit voltages as compared to pure MAPbI. However, simple size considerations based on the Goldschmidt tolerance factor suggest that guanidinium is too big to completely replace methylammonium as an A cation in the APbI perovskite lattice, and its effect was thus ascribed to passivation of surface trap states at grain boundaries. As guanidinium was not thought to incorporate into the MAPbI lattice, interest waned since it appeared unlikely that it could be used to modify the intrinsic perovskite properties. Here, using solid-state NMR, we provide for the first time atomic-level evidence that GUA is directly incorporated into the MAPbI and FAPbI lattices, forming pure GUA MAPbI or GUA FAPbI phases, and that it reorients on the picosecond time scale within the perovskite lattice, which explains its superior charge carrier stabilization capacity. Our findings establish a fundamental link between charge carrier lifetimes observed in photovoltaic perovskites and the A cation structure in ABX-type metal halide perovskites.
The high conversion efficiency has made metal halide perovskite solar cells a real breakthrough in thin film photovoltaic technology in recent years. Here, we introduce a straightforward strategy to reduce the level of electronic defects present at the interface between the perovskite film and the hole transport layer by treating the perovskite surface with different types of ammonium salts, namely ethylammonium, imidazolium and guanidinium iodide. We use a triple cation perovskite formulation containing primarily formamidinium and small amounts of cesium and methylammonium. We find that this treatment boosts the power conversion efficiency from 20.5% for the control to 22.3%, 22.1%, and 21.0% for the devices treated with ethylammonium, imidazolium and guanidinium iodide, respectively. Best performing devices showed a loss in efficiency of only 5% under full sunlight intensity with maximum power tracking for 550 h. We apply 2D- solid-state NMR to unravel the atomic-level mechanism of this passivation effect.
Perovskite solar cells present one of the most prominent photovoltaic technologies, yet their stability, scalability, and engineering at the molecular level remain challenging. We demonstrate a concept of multifunctional molecular modulation of scalable and operationally stable perovskite solar cells that exhibit exceptional solar-to-electric power conversion efficiencies. The judiciously designed bifunctional molecular modulator SN links the mercapto-tetrazolium (S) and phenylammonium (N) moieties, which passivate the surface defects, while displaying a structure-directing function through interaction with the perovskite that induces the formation of large grain crystals of high electronic quality of the most thermally stable formamidinium cesium mixed lead iodide perovskite formulation. As a result, we achieve greatly enhanced solar cell performance with efficiencies exceeding 20% for active device areas above 1 cm2 without the use of antisolvents, accompanied by outstanding operational stability under ambient conditions.
Organic-inorganic lead halide perovskites are a promising family of light absorbers for a new generation of solar cells, with reported efficiencies currently exceeding 22%. A common problem of solar cells fabricated using these materials is that their efficiency depends on their cycling history, an effect known as current-voltage ( J- V) hysteresis. Potassium doping has recently emerged as a universal way to overcome this adverse phenomenon. While the atomistic origins of J- V hysteresis are still not fully understood, it is essential to rationalize the atomic-level effect of protocols that lead to its suppression. Here, using K MAS NMR at 21.1 T we provide for the first time atomic-level characterization of the potassium-containing phases that are formed upon KI doping of multication and multianion lead halide perovskites. We find no evidence of potassium incorporation into 3D perovskite lattices of the recently reported materials. Instead, we observe formation of a mixture of potassium-rich phases and unreacted KI. In the case of Br-containing lead halide perovskites doped with KI, a mixture of KI and KBr ensues, leading to a change in the Br/I ratio in the perovskite phase with respect to the undoped perovskite. Simultaneous Cs and K doping leads to the formation of nonperovskite Cs/K lead iodide phases.
A series of 37 dinitroxide biradicals have been prepared and their performance studied as polarizing agents in cross-effect DNP NMR experiments at 9.4 T and 100 K in 1,1,2,2-tetrachloroethane (TCE).
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.