Abstract. Using the sol-gel technique, nanocomposite SiO 2 -SnO 2 thin films comprising a designed hierarchical pore structure were prepared on cost-efficient oxidized silicon substrates. These films exhibit advanced gas sensing properties both for reducing gases and oxygen due to an efficient analyte transport by mesoporores.
IntroductionGas sensitivity of metal oxide gas sensors increases rapidly when the dimensions of oxide sensing materials become comparable or smaller than the typical thickness of the electron depletion layer [1]. Therefore, nanosized materials exhibit outstanding properties in sensor application, particularly low operation temperature and high sensitivity, attributed to their large surface area to volume ratio.Hierarchical structures are higher dimensional structures composed of many, lower dimensional building blocks. Because they are generally larger than the individual nanostructures, their van der Waals attraction is relatively weak. On the other hand, hierarchical microstructures provide an effective gas diffusion path via well aligned mesoporous structures without sacrificing a high surface area [2]. Consequently, they exhibit high gas sensitivity and fast gas response. Hierarchical nanostructures for gas sensors were prepared by vapour phase growth, hydrothermal or hydrothermal/solvothermal reactions [2], by electrospinning and subsequent oxygen plasma etching [3], by ultrasonic spray pyrolysis [4], by flame-spray-pyrolysis [5,6], and by pulsed laser deposition techniques [7]. Well defined hierarchical pore structures were prepared by sol-gel method in alkoxyderived silica systems [8] as well as in aluminium salt solutions [9] utilizing a phase separation mechanism as a pore forming principle. Recently, one of our laboratories has applied this approach for the fabrication of SnO 2 -SiO 2 composites comprising hierarchical macro-, meso-and micropores (according to IUPAC notation [10]). This minimises the build up of thermal stresses during sensor fabrication and, therefore, improves adhesion. Moreover, our technology is based on inexpensive precursors such as SnCl 2 and tetraethylorthosilicate (TOES). In the first case, advantages compared to alkoxides are besides the precursor costs a reduced sensitivity of the precursor to heat, moisture and light, and an improved time stability of the sol against the increase in viscosity. On the other hand, the presence of Cl -increases the gelling time. In this work, we investigate gas sensing properties of sol-gel deposited nanocrystalline SnO 2 -SiO 2 composites in relation to their microstructure and demonstrate gas sensitivities at the state-of-art level.
A correlation between the photocatalytic efficiency and gas sensitivity has been attempted on pure and N‐doped TiO2 thin films prepared by pulsed DC magnetron sputtering. The physical properties are studied. The gas sensing behavior in pure and nitrogen doped TiO2 thin films could be realized at low temperature. The measurements start at 130 °C. The nitrogen doped TiO2 (3 sccm) has no sensitivity for oxygen. All sensors have sensitivity to hydrogen. If the temperature is increased the sensitivity is increased. All samples show photocatalytic activity. The photocatalytic and gas sensing properties have no significant correlations.
Zusammenfassung
In diesem Beitrag wird ein Sensorsystem zum Nachweis bakterieller Kontaminationen in wasserführenden Anlagen der Trinkwasserversorgung und in technischen Wasserkreisläufen vorgestellt, das eine schwellwertbasierte permanente Überwachung der Trinkwasserinstallationen ermöglicht. Der Aufbau basiert auf einem Zwei-Sensoren-Prinzip mit einem Messsensor, der eine poröse Polyamid 12-Substratfalle als Detektionsort für die Biofilmbildung enthält, und einem Referenzsensor. Als Trägermaterialien für die Substratfalle wurden geeignete dreidimensionale Geometrien entwickelt und mittels additiven Fertigungsverfahren realisiert. Dabei ist es gelungen, einen optimalen Kompromiss zwischen fluidisch optimierter 3D-Struktur und der technologischen Realisierbarkeit mittels 3D-Druck zu finden. Im Ergebnis entstand eine fluidische Falle für Mikroorganismen, durch die das entsprechende Leitungswasser geführt wird und auf deren Oberfläche sich eine angereicherte Mikroorganismenpopulation als Biofilm auf dem Substratmaterial ausbildet. Die Anbindung des Sensors an eine Mess-, Steuerungs- und Regelungs- (MSR-)Technik ist über eine Datenschnittstelle gewährleistet, wo auch der Vergleich der impedimetrischen Messdaten zwischen Mess- und Referenzkanal erfolgt. Wenn das Differenzsignal einen Schwellenwert erreicht, kann eine frühzeitige Behandlung von Komponenten des Wasserkreislaufes weit vor dem Eintreten möglicher gesundheitlicher Beeinträchtigungen durch Wasserkontaminationen durchgeführt werden. Die Sensoren sind als austauschbare Einheiten nach Bewuchs mit Biofilmen konzipiert. Für den Einsatz in Trinkwasserinstallationen entsprechen Sensor, Beschichtung und Sensorträger den hygienischen Anforderungen der Trinkwasserverordnung.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.