International audienceAn experimental and numerical study of the laser-induced damage of the surface of optical materialin the femtosecond regime is presented. The objective of this work is to investigate the differentprocesses involved as a function of the ratio of photon to bandgap energies and compare the resultsto models based on nonlinear ionization processes. Experimentally, the laser-induced damagethreshold of optical materials has been studied in a range of wavelengths from 1030 nm (1.2 eV) to310 nm (4 eV) with pulse durations of 100 fs with the use of an optical parametric amplifier system.Semi-conductors and dielectrics materials, in bulk or thin film forms, in a range of bandgap from 1to 10 eV have been tested in order to investigate the scaling of the femtosecond laser damagethreshold with the bandgap and photon energy. A model based on the Keldysh photo-ionizationtheory and the description of impact ionization by a multiple-rate-equation system is used toexplain the dependence of laser-breakdown with the photon energy. The calculated damage fluencethreshold is found to be consistent with experimental results. From these results, the relativeimportance of the ionization processes can be derived depending on material properties and irradiationconditions. Moreover, the observed damage morphologies can be described within the frameworkof the model by taking into account the dynamics of energy deposition with one dimensionalpropagation simulations in the excited material and thermodynamical considerations

We report on the laser damage resistance of ion beam-sputtered oxide materials (Al2O3, Nb2O5, HfO2, SiO2, Ta2O5, ZrO2) and mixtures of Al2O3-SiO2, Nb2O5-SiO2, HfO2-SiO2, Ta2O5-SiO2, and ZrO2-SiO2, irradiated by single 500 fs pulses at 1030 nm. Laser-induced damage threshold (LIDT), refractive index, and bandgaps of the single-layer coatings are measured. For pure oxide materials a linear evolution of the LIDT with bandgap is observed. The results are in accordance with our simulations based on photo-ionization and avalanche-ionization. In the case of mixtures, however, deviations from the previous behaviors are evidenced. The evolution of the LIDT as a function of the refractive index is analyzed, and an empirical description of the relation between refractive index and LIDT is proposed.

Laser damage phenomena are governed by a number of different effects for the respective operation modes and pulse durations. In the ultra short pulse regime the electronic structure in the dielectric coating and the substrate material set the prerequisite for the achieved laser damage threshold of an optical component. Theoretical considerations have been done to assess the impact of contributing ionization phenomena in order to find a valid description for laser-induced damage in the femtosecond (fs) domain. Subsequently, a special set of sample has been designed to verify these considerations via ISO certified laser damage testing. Examining the theoretical and experimental data reveals the importance of multi-photon absorption for the optical breakdown. For titania, the influence of multi-photon absorption has been clearly shown by a quantized wavelength characteristic of the laser damage threshold.

This study aimed to test the effectiveness of ethyl gallate (EG) against S. mutans biofilm formation on solid surfaces (polystyrene, glass) and acidogenicity, and to examine the effect on expression of related genes. The biofilm that is formed by S. mutans bacteria was evaluated using colorimetric assay and optical profilometry, while the pH of the biofilm growth medium was measured with microelectrode. The expression of genes encoding glucan binding protein B (gbpB), glucosyltranferases B, -C, -D (gtfB, -C, -D) and F-ATPase (atpD, atpF) was assessed using a quantitative reverse transcription-polymerase chain reaction (RT-qPCR). It was revealed that all of the EG concentrations significantly suppressed S. mutans biofilm build-up on polystyrene and glass surfaces, and inhibited acidogenicity, in a dose-dependent manner, compared to the activity of untreated bacteria (p < 0.05). The highest concentration of EG (3.53 mM) reduced biofilm formation on polystyrene and glass surfaces by 68% and more than 91%, respectively, and prevented a decrease in pH levels by 95%. The RT-qPCR data demonstrate that the biofilm-producing bacteria treated with EG underwent significant gene expression changes involving the gtfC (a 98.6 increase in fold change), gtfB gene (a 47.5 increase in fold change) and the gbpB gene (a 13.8 increase in fold change). However, for the other genes tested (gtfD, atpD and atpF), the EG treatments did not produce significant expression change compared to the control. EG produced significant gene expression change in three genes—gtfC, gtfB, and gbpB; it has the capacity to inhibit S. mutans biofilm formation on solid surfaces (polystyrene, glass), as well as acidogenicity. Therefore, EG might be used as an antibiofilm and/or anticaries agent for oral formulations in order to reduce the prevalence of dental caries.

No abstract