Lead‐free perovskite‐inspired materials (PIMs) are gaining attention in optoelectronics due to their low toxicity and inherent air stability. Their wide bandgaps (≈2 eV) make them ideal for indoor light harvesting. However, the investigation of PIMs for indoor photovoltaics (IPVs) is still in its infancy. Herein, the IPV potential of a quaternary PIM, Cu2AgBiI6 (CABI), is demonstrated upon controlling the film crystallization dynamics via additive engineering. The addition of 1.5 vol% hydroiodic acid (HI) leads to films with improved surface coverage and large crystalline domains. The morphologically‐enhanced CABI+HI absorber leads to photovoltaic cells with a power conversion efficiency of 1.3% under 1 sun illumination—the highest efficiency ever reported for CABI cells and of 4.7% under indoor white light‐emitting diode lighting—that is, within the same range of commercial IPVs. This work highlights the great potential of CABI for IPVs and paves the way for future performance improvements through effective passivation strategies.

Double perovskites are a promising family of lead-free materials that not only replace lead but also enable new optoelectronic applications beyond photovoltaics. Recently, a titanium (Ti)-based vacancy-ordered double perovskite, Cs2TiBr6, has been reported as an example of truly sustainable and earth-abundant perovskite with controversial results in terms of photoluminescence and environmental stability. Our work looks at this material from a new perspective, i.e., at the nanoscale. We demonstrate the first colloidal synthesis of Cs2TiX6 nanocrystals (X = Br, Cl) and observe tunable morphology and size of the nanocrystals according to the set reaction temperature. The Cs2TiBr6 nanocrystals synthesized at 185 °C show a bandgap of 1.9 eV and are relatively stable up to 8 weeks in suspensions. However, they do not display notable photoluminescence. The centrosymmetric crystal structure of Cs2TiBr6 suggests that this material could enable third-harmonic generation (THG) responses. Indeed, we provide a clear evidence of THG signals detected by the THG microscopy technique. As only a few THG-active halide perovskite materials are known to date and they are all lead-based, our findings promote future research on Cs2TiBr6 as well as on other lead-free double perovskites, with stronger focus on currently unexplored nonlinear optical applications.

Phenothiazine (PTZ)-based materials have recently received considerable interest owing to their intriguing optoelectronic properties, low-cost, versatility of functionalization, and commercial availability. The advent of molecular engineering concepts in π-conjugated organic...

Antimony‐based perovskite‐inspired materials (PIMs) are solution‐processable halide absorbers with interesting optoelectronic properties, low toxicity, and good intrinsic stability. Their bandgaps around 2 eV make them particularly suited for indoor photovoltaics (IPVs). Yet, so far only the fully inorganic Cs3Sb2ClxI9−x composition has been employed as a light‐harvesting layer in IPVs. Herein, the first triple‐cation Sb‐based PIM (CsMAFA‐Sb) in which the A‐site of the A3Sb2X9 structure consists of inorganic cesium alloyed with organic methylammonium (MA) and formamidinium (FA) cations is introduced. Simultaneously, the X‐site is tuned to guarantee a 2D structure while keeping the bandgap nearly unchanged. The presence of three A‐site cations is essential to reduce the trap‐assisted recombination pathways and achieve high performance in both outdoor and indoor photovoltaics. The external quantum efficiency peak of 77% and the indoor power conversion efficiency of 6.4% are the highest values ever reported for pnictohalide‐based photovoltaics. Upon doping of the P3HT hole‐transport layer with F4‐TCNQ, the power conversion efficiency of CsMAFA‐Sb devices is fully retained compared to the initial value after nearly 150 days of storage in dry air. This work provides an effective compositional strategy to inspire new perspectives in the PIM design for IPVs with competitive performance and air stability.

Lead-based halide perovskite nanocrystals (NCs) are recognized as emerging emissive materials with superior photoluminescence (PL) properties. However, the toxicity of lead and the swift chemical decomposition under atmospheric moisture severely hinder their commercialization process. Herein, we report the first colloidal synthesis of lead-free Cs 4 CuIn 2 Cl 12 layered double perovskite NCs via a facile moisture-assisted hot-injection method stemming from relatively nontoxic precursors. Although moisture is typically detrimental to NC synthesis, we demonstrate that the presence of water molecules in Cs 4 CuIn 2 Cl 12 synthesis enhances the PL quantum yield (mainly in the near-UV range), induces a morphological transformation from 3D nanocubes to 2D nanoplatelets, and converts the dark transitions to radiative transitions for the observed self-trapped exciton relaxation. This work paves the way for further studies on the moisture-assisted synthesis of novel lead-free halide perovskite NCs for a wide range of applications.

Despite the outstanding power conversion efficiency of triple-cation perovskite solar cells (PSCs), their low long-term stability in the air is still a major bottleneck for practical applications. The hygroscopic dopants...

Colloidal halide perovskite nanocrystals are promising candidates for next-generation optoelectronics because of their facile synthesis and their outstanding and size-tunable properties. However, these materials suffer from rapid degradation, similarly to their bulk perovskite counterparts. Here, we survey the most recent strategies to boost perovskite nanocrystals stability, with a special focus on the intrinsic chemical- and compositional-factors at synthetic and post-synthetic stage. Finally, we review the most promising approaches to address the environmental extrinsic stability of perovskite nanocrystals (PNCs). Our final goal is to outline the most promising research directions to enhance PNCs’ lifetime, bringing them a step closer to their commercialization.

Cesium lead iodide (CsPbI3) perovskite nanocrystals (NCs) suffer from a known transformation at room temperature from their red-emitting (black) to non-emitting (yellow) phase, induced by the tilting of PbI6 octahedra....