The research on alternative solvents and co-solvents is a relevant aspect when envisioning the improvement of biocatalytic reactions. Among these solvents and co-solvents, deep eutectic solvents (DES) may be considered as customizable new reaction media for biocatalysis. Accordingly, in this work, sixteen DES aqueous solutions, as well as of the individual DES components at the same conditions have been investigated in laccasecatalyzed reactions. Cholinium-and betaine-based DES formed with polyols at different molar ratio and concentrations were evaluated. The results reported show that in presence of most DES the laccase activity is preserved and, with a particular DES, enhanced up to 200%. Molecular docking studies demonstrated that while most DES components establish hydrogen-bonds with the enzyme amino acids, those that establish stronger interactions with the enzyme (expressed by absolute values of docking affinity energies) lead to an enhanced laccase activity. Finally, the laccase stability was evaluated in additional tests under extreme storage temperatures (60 ºC and -80 ºC). Although no significant protection to high temperatures was afforded by DES, an enhanced laccase activity when stored at low temperatures was found, at least up to 20 days. Combining experimental results and molecular docking this work shows that DES can be designed as co-solvents to improve biocatalytic reactions.
In the past decade, remarkable advances in the production and use of antibodies as therapeutic drugs and in research/diagnostic fields have led to their recognition as value-added proteins. These biopharmaceuticals have become increasingly important, reinforcing the current demand for the development of more benign, scalable and cost-effective techniques for their purification. Typical polymer-polymer and polymer-salt aqueous biphasic systems (ABS) have been studied for such a goal; yet, the limited polarity range of the coexisting phases and their low selective nature still are their major drawbacks. To overcome this limitation, in this work, ABS formed by bio-based ionic liquids (ILs) and biocompatible polymers were investigated. Bio-based ILs composed of ions derived from natural sources, namely composed of the cholinium cation and anions derived from plants natural acids, have been designed, synthesized, characterized and used for the creation of ABS with polypropyleneglycol (PPG 400). The respective ternary phase diagrams were initially determined at 25 °C to infer on mixture compositions required to form aqueous systems of two phases, further applied in the extraction of pure immunoglobulin G (IgG) to identify the most promising bio-based ILs, and finally employed in the purification of IgG from complex and real matrices of rabbit serum. Remarkably, the complete extraction of IgG to the IL-rich phase was achieved in a single-step. With pure IgG a recovery yield of 100% was obtained, while with rabbit serum this value slightly decreased to ca. 85%. Nevertheless, a 58% enhancement in the IgG purity was achieved when compared with its purity in serum samples. The stability of IgG before and after extraction was also evaluated by size exclusion high-performance liquid chromatography (SE-HPLC), sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE) and Fourier transform infrared spectroscopy (FTIR). In most ABS formed by bio-based ILs, IgG maragfreire@ua.pt; Fax: +351 234370084; Tel: +351 234370200; kamlesh@csmcri.org, drkamaleshp@gmail.com; Fax: +91-278-2567562; Tel: +91-278 2567760. † Electronic supplementary information (ESI) available: Source of natural acids, NMR spectra of biobased ILs, experimental data on binodal curves, and SE-HPLC data of rabbit serum samples. See
The activity and stability of commercial laccase (DeniLite base) in three different water soluble ionic liquids (ILs) (1-ethyl-3-methylimidazolium 2-(2-methoxyethoxy) ethylsulfate, [emim][[MDEGSO4], 1-ethyl-3-methylimidazolium ethylsulfate, [emim][EtSO4], and 1-ethyl-3-methylimidazolium methanesulfonate, [emim][MeSO3]) have been studied and compared to that in two organic solvents (acetonitrile and dimethyl sulfoxide). Initial enzyme activities were similar among the ILs if the same conditions were used. A high reduction on initial enzyme activity was found with acidic pH (5.0). The effect of pH and solvent concentration on enzyme stability were investigated in more detail for 1 week. The enzyme maintained a high stability at pH 9.0 for all ILs tested. [emim][MDEGSO4] was the most promising IL for laccase with an activity loss of about 10% after 7 days of incubation. The kinetic studies in the presence of ABTS as substrate allowed to calculate the Michaelis- Menten parameters. Good agreement was found between experimental data and calculated values using the Michaelis-Menten mechanism, with a total average relative deviation of 2.1%.
Chemically functionalized multi-walled carbon nanotubes (CNTs) are used as carriers for laccase immobilization. In this work, CNTs were modified using different approaches with a combination of methods involving hydrothermal oxidation with nitric acid, treatment with 3-aminopropyltriethoxysilane, glutaraldehyde, N-ethyl-N-(3-(dimethylamino)-propyl) carbodiimide hydrochloride and N-hydroxysuccinimide. The enzyme immobilization efficiency and recovered activity were evaluated towards-azino-bis(3-ethylbenzathiazoline-6-sulfonic acid) biocatalytic oxidation. The best compromise between immobilization efficiency and recovered activity was obtained using the CNTs functionalized with 0.3 M HNO 3 , treated with N-ethyl-N-(3-(dimethylamino)propyl) carbodiimide hydrochloride and N-hydroxysuccinimide. This catalyst also showed the best thermal stability (at 50 and 60 ºC). The bioconjugate based on this material was characterized by vibrational spectroscopies (FTIR and Raman) and by N 2 adsorption. The results from reutilization tests showed that laccase activity was kept above 65% of its initial value after five consecutive cycles of reuse. The biocatalytic performance of the immobilized enzyme was evaluated for the degradation of a mixture of phenolic compounds in water containing phenol, resorcinol, 4-methoxyphenol and 4-chlorophenol. As means of cost efficient to enzyme reutilization, laccase was immobilized over polysulfone membranes blended with the functionalized CNTs and studied in the degradation of 4-methoxyphenol.
Experimental design and response surface methodologies were applied to optimize laccase production by Trametes versicolor in a bioreactor. The effects of three factors, initial glucose concentration (0 and 9 g/L), agitation (100 and 180 rpm), and pH (3.0 and 5.0), were evaluated to identify the significant effects and its interactions in the laccase production. The pH of the medium was found to be the most important factor, followed by initial glucose concentration and the interaction of both factors. Agitation did not seem to play an important role in laccase production, nor did the interaction agitation x medium pH and agitation x initial glucose concentration. Response surface analysis showed that an initial glucose concentration of 11 g/L and pH controlled at 5.2 were the optimal conditions for laccase production by T. versicolor. Under these conditions, the predicted value for laccase activity was >10,000 U/L, which is in good agreement with the laccase activity obtained experimentally (11,403 U/L). In addition, a mathematical model for the bioprocess was developed. It is shown that it provides a good description of the experimental profile observed, and that it is capable of predicting biomass growth based on secondary process variables.
Commercial laccase formulation was immobilized on modified green coconut fiber silanized with 3-glycidoxypropyltrimethoxysilane, aiming to achieve a cheap and effective biocatalyst. Two different strategies were followed: one point (pH 7.0) and multipoint (pH 10.0) covalent attachment. The influence of immobilization time on enzymatic activity and the final reduction with sodium borohydride were evaluated. The highest activities were achieved after 2 h of contact time in all situations. Commercial laccase immobilized at pH 7.0 was found to have higher activity and higher affinity to the substrate. However, the immobilization by multipoint covalent attachment improved the biocatalyst thermal stability at 50 °C, when compared to soluble enzyme and to the immobilized enzyme at pH 7.0. The Schiff's bases reduction by sodium borohydride, in spite of causing a decrease in enzyme activity, showed to contribute to the increase of operational stability through bonds stabilization. Finally, these immobilized enzymes showed high efficiency in the continuous decolourization of reactive textile dyes. In the first cycle, the decolourization is mainly due to dyes adsorption on the support. However, when working in successive cycles, the adsorption capacity of the support decreases (saturation) and the enzymatic action increases, indicating the applicability of this biocatalyst for textile wastewater treatment.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.