Bone fractures to be corrected need stabilization of their extremities, which is achieved with the use of plates and screws. This research aimed to produce castor bean polyurethane (Ricinus communis), to make resorbable plate, structural and thermal analysis. The production was made by the glycerolysis of the triglycerides present in the oil, after addition of polyol/glycerol and hexamethylene diisocyanate (HDI) to form urethane structures, with and without addition of hydroxyapatite. The characterization was by FTIR spectroscopy, scanning electron microscopy (SEM), X-ray diffraction, differential scanning calorimetry and thermogravimetry. Plates with dimensions of 40 mm X 10 mm X 2 mm were obtained. The SEM showed flat and homogeneous surface. DRX analysis showed the semi-crystallinity of the biomaterial. Glass transition and thermal stability up to 50 °C were observed, followed by thermal decomposition up to 450 °C. The produced polyurethane showed it is possible to be applied in the manufacture of plate.

Biomaterials used in tissue regeneration processes represent a promising option for the versatility of its physical and chemical characteristics, allowing for assisting or speeding up the repair process stages. This research has characterized a polyurethane produced from castor oil monoacylglyceride (Ricinus communis L) and tested its effect on reconstructing bone defects in rat calvaria, comparing it with commercial castor oil polyurethane. The characterizations of the synthesized polyurethane have been performed by spectroscopy in the infrared region with Fourier transform (FTIR); thermogravimetric analysis (TG/DTG); X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM). For the in vivo test, 24 animals have been used, divided into 3 groups: untreated group (UG); control group treated with Poliquil® castor polyurethane (PCP) and another group treated with castor polyurethane from the Federal University of Piauí - UFPI (CPU). Sixteen weeks after surgery, samples of the defects were collected for histological and histomorphometric analysis. FTIR analysis has shown the formation of monoacylglyceride and polyurethane. TG and DTG have indicated thermal stability of around 125 °C. XRD has determined the semi-crystallinity of the material. The polyurethane SEM has shown a smooth morphology with areas of recesses. Histological and histomorphometric analyzes have indicated that neither CPU nor PCP induced a significant inflammatory process, and CPU has shown, statistically, better performance in bone formation. The data obtained shows that CPU can be used in the future for bone reconstruction in the medical field.

The development of ‘smart’ scaffolds has achieved notoriety among current prospects for bone repair, especially for chronic osteopathy, such as osteoporosis. Millions of individuals in the world suffer from poor bone healing due to osteoporosis. The objective of this work was to produce and characterize castor polyurethane (PU) scaffolds (Ricinus communis L.) and evaluate its in vitro biocompatibility with stem cells and osteoinductive effect in vivo on bone failures in a leporid model of osteoporosis. The material was characterized using Fourier-transform infrared spectroscopy, thermogravimetric analysis, SEM, and porosity analysis. Then, the biocompatibility was assessed by adhesion using SEM and cytotoxicity in a 3-(4, 5-dimethyl-2-thiazolyl)-2, 5-diphenyl-2H-tetrazolium assay. The osteoinductive effect in vivo was determined in bone defects in rabbit tibias (Oryctolagus cuniculus) submitted to castor PU scaffold, castor PU scaffold associated with stem cells, and negative control, after four and eight weeks, evaluated by computed microtomography and histopathology. The scaffolds were porous, with an average pore size of 209.5 ± 98.2 µm, absence of cytotoxicity, and positive cell adhesiveness in vitro. All the animals presented osteoporosis, characterized by multifocal osteoblastic inactivity and areas of mild fibrosis. There were no statistical differences between these treatments in the fourth week of treatment. In the eighth week, the treatment with castor PU scaffold alone induced more significant bone formation when compared to the other groups, followed by treatment with an association between castor PU scaffold and stem cells. The castor PU scaffold was harmless to cell culture, favoring cell adhesiveness and proliferation, in addition to inducing bone neoformation in osteoporotic rabbits.

Osteoporosis is a public health problem, with bone loss being the main consequence. Hydroxyapatite (HA) has been largely used as a bioceramic to stimulate bone growth. In our work, a cerium-containing HA (Ce-HA) has been proposed and its effects on the antimicrobial and bone-inducing properties were investigated. The synthesis of the materials occurred by the suspension–precipitation method (SPM). The XRD (X-ray Diffraction) confirmed the crystalline phase, and the Rietveld refinement confirmed the crystallization of HA and Ce-HA in a hexagonal crystal structure in agreement with ICSD n° 26205. Characterizations by FT-IR (Fourier Transform Infrared Spectroscopy), XPS (X-ray Photoemission Spectroscopy), and FESEM-EDS (Field Emission Scanning Electron Microscope-Energy Dispersive X-ray Spectroscopy) confirmed the presence of cerium (Ce3+ and Ce4+). The antibacterial activity of Has was evaluated against Staphylococcus aureus 25,923 and Escherichia coli 25,922 strains, which revealed that the material has antimicrobial properties and the cytotoxicity assay indicated that Ce-containing HA was classified as non-toxic. The effects of Ce-HA on bone repair, after application in bone defects in the tibia of female rats with osteoporosis induced by ovariectomy (OVX), were evaluated. After 15 and 30 days of implantation, the samples were analyzed by Raman, histology and X-ray microtomography. The results showed that the animals that had the induced bone defects filled with the Ce-HA materials had more expressive bone neoformation than the control group.

A anquilose da articulação temporomandibular (ATM) que ocorre após a fratura do côndilo mandibular constitui um desafio de tratamento para os cirurgiões buco-maxilo-faciais. É uma condição na qual existe imobilidade da articulação, caracterizada pela formação de um tecido ósseo, fibroso ou massa fibro-óssea fundida a base do crânio. Traumas, doenças sistêmicas e infecções estão entre os fatores mais comuns que desencadeiam a progressão desta condição. A literatura demonstra diversas maneiras de tratamento como: artroplastia em gap, artroplastia em gap interposicional usando o músculo temporal, reconstrução da ATM utilizando enxerto costocondral e reconstrução aloplástica da articulação. Diante disso, este artigo objetiva relatar o caso de uma criança vítima de trauma (acidente ciclístico), diagnosticada com fratura alta no côndilo mandibular esquerdo e demonstrar a possibilidade de evolução da fratura em anquilose de ATM e, em sequência, evidenciar a eficácia do tratamento cirúrgico realizado por artroplastia em gap associado a fisioterapia como protocolo de sucesso no tratamento de anquilose com 2 anos de acompanhamento. O englobamento dos dados se deu por meio da busca de em periódicos, artigos científicos e trabalhos de conclusão de curso encontrados nos bancos de dados Pubmed, BVS e Capes.

To analyze the biocompatibility of the scaffold produced from a natural polymer derived from castor oil through hemolytic activity and antimicrobial activity, to enable the clinical application. Three in vitro tests were performed: Hemolytic activity test -Polymer partially dissolved in contact with blood agar; Hemolytic activity test in sheep's blood -Polymer extract with red blood cells solution; Antimicrobial activity test -Solid polymer in direct contact with E. Coli and S. Aureus. For hemolytic tests, none of the samples showed hemolysis. Negative hemolytic activity is a good indicator, as the maintenance of the blood clot in the area of the lesion is essential for the formation of new tissue. For the antimicrobial activity test, no significant activity was observed against the bacteria used. The polymer is not toxic to red blood cells, being viable for clinical application as a matrix for tissue regeneration.

To produce polysaccharide-based hydrogels and cerium (Ce3+) doped hydroxyapatite plus chitosan and collagen to enable future applications in the treatment of joint degeneration. Hydrogel production and characterization were performed with Fourier transform infrared spectroscopy (FTIR), thermogravimetry analysis (TGA) and cytotoxicity testing with MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide]. A final biomaterial composition was Kelcogel® Gelana (58%), chitosan (22.3%), Ce3+ doped hydroxyapatite (10.7%) and bovine collagen (9%), or selected aspect material gelatinous physical color with whitish color and can be injected. The biomaterial composition was proven in the FTIR and TGA, which also provided the maximum supported temperature. In the MTT assay, despite the reduction in viability of the experimental group compared to the control group, cell viability remained approximately 90%. In the FTIR and TGA tests, the material composition was proven. The material does not present cytotoxic behavior for the MTT test, being an alternative for the treatment of joint diseases.

Evaluation of therapeutic drug protocol used for control of pain after dental extractions Avaliação do protocolo terapêutico medicamentoso utilizado para o controle da dor após exodontias