Detailed and comprehensive accounts of waste generation and treatment form the quantitative basis of designing and assessing policy instruments for a circular economy (CE). We present a harmonized multiregional solid waste account, covering 48 world regions, 11 types of solid waste, and 12 waste treatment processes for the year 2007. The account is part of the physical layer of EXIOBASE v2, a multiregional supply and use table. EXIOBASE v2 was used to build a waste-input-output model of the world economy to quantify the solid waste footprint of national consumption. The global amount of recorded solid waste generated in 2007 was approximately 3.2 Gt (gigatonnes 1 ), of which 1 Gt was recycled or reused, 0.7 Gt was incinerated, gasified, composted, or used as aggregates, and 1.5 Gt was landfilled. Patterns of waste generation differ across countries, but a significant potential for closing material cycles exists in both high-and low-income countries. The European Union (EU), for example, needs to increase recycling by approximately 100 megatonnes per year (Mt/yr) and reduce landfilling by approximately 35 Mt/yr by 2030 to meet the targets set by the Action Plan for the Circular Economy. Solid waste footprints are strongly coupled with affluence, with income elasticities of around 1.3 for recycled waste, 2.2 for recovery waste, and 1.5 for landfilled waste, respectively. The EXIOBASE v2 solid waste account is based on statistics of recorded waste flows and therefore likely to underestimate actual waste flows. Keywords:circular economy consumption-based accounting industrial ecology multiregional input-output municipal solid waste waste input-output Supporting information is linked to this article on the JIE website Conflict of interest statement: The authors have no conflict to declare.
SummaryCarbon footprints aim to engage consumers in contributing to climate-change mitigation. Consumption-oriented policy measures attempt to cause voluntary or incentivized interventions that reduce environmental impact through the supply chain by utilizing demand drivers. A large body of life cycle assessment studies describe how specific actions can reduce the environmental footprint of an individual or household. However, these assessments are often conducted with a narrow focus on particular goods and processes. Here, we formalize a counterfactual method and operational tool for scoping the potential impact of such actions, focusing on economy-wide impact. This "quickscan" tool can model shifts and reductions in demand, rebound effects (using marginal expenditure), changes in domestic and international production recipes, and reductions in the environmental intensity of production. This tool provides quick, macro-level estimates of the efficacy of consumer-oriented policy measures and can help to prioritize relevant policies. We demonstrate the method using two case studies on diet and clothing using the EXIOBASE3 multiregional input-output database, giving spatially explicit information on where environmental impact reductions of the interventions occur, and where impacts may increase in the case of rebounds. Keywords:carbon footprints climate policy industrial ecology input-output analysis life cycle assessment (LCA) rebound Supporting information is linked to this article on the JIE website
Biochar is one of the most affordable negative emission technologies (NET) at hand for future large-scale deployment of carbon dioxide removal (CDR), which is typically found essential to stabilizing global temperature rise at relatively low levels. Biochar has also attracted attention as a soil amendment capable of improving yield and soil quality and of reducing soil greenhouse gas (GHG) emissions. In this work, we review the literature on biochar production potential and its effects on climate, food security, ecosystems, and toxicity. We identify three key factors that are largely affecting the environmental performance of biochar application to agricultural soils: (1) production condition during pyrolysis, (2) soil conditions and background climate, and (3) field management of biochar. Biochar production using only forest or crop residues can achieve up to 10% of the required CDR for 1.5 ∘ C pathways and about 25% for 2 ∘ C pathways; the consideration of dedicated crops as biochar feedstocks increases the CDR potential up to 15–35% and 35–50%, respectively. A quantitative review of life-cycle assessment (LCA) studies of biochar systems shows that the total climate change assessment of biochar ranges between a net emission of 0.04 tCO 2 eq and a net reduction of 1.67 tCO 2 eq per tonnes feedstock. The wide range of values is due to different assumptions in the LCA studies, such as type of feedstock, biochar stability in soils, soil emissions, substitution effects, and methodological issues. Potential trade-offs between climate mitigation and other environmental impact categories include particulate matter, acidification, and eutrophication and mostly depend on the background energy system considered and on whether residues or dedicated feedstocks are used for biochar production. Overall, our review finds that biochar in soils presents relatively low risks in terms of negative environmental impacts and can improve soil quality and that decisions regarding feedstock mix and pyrolysis conditions can be optimized to maximize climate benefits and to reduce trade-offs under different soil conditions. However, more knowledge on the fate of biochar in freshwater systems and as black carbon emissions is required, as they represent potential negative consequences for climate and toxicity. Biochar systems also interact with the climate through many complex mechanisms (i.e., surface albedo, black carbon emissions from soils, etc.) or with water bodies through leaching of nutrients. These effects are complex and the lack of simplified metrics and approaches prevents their routine inclusion in environmental assessment studies. Specific emission factors produced from more sophisticated climate and ecosystem models are instrumental to increasing the resolution and accuracy of environmental sustainability analysis of biochar systems and can ultimately improve the characterization of the heterogeneities of varying local conditions and combinations of type feedstock, conversion process, soil conditions, and application practice.
Almost all elements of the periodic table are used in modern technology, especially for renewable energy and communication technologies. Graedel et al. assessed the AbstractMany new and efficient technologies require 'critical metals' to function. These metals are often extracted as by-product of another metal, and their future supply is therefore dependent on mining developments of the host metal. Supply of critical metals can also be constrained because of political instability, discouraging mining policies, or trade restrictions. Scenario analyses of future metal supply that take these factors into account would provide policy makers with information about possible supply shortages. We provide a scenario analysis for demand and supply of cobalt, a potentially critical metal mainly used not only in high performance alloys but also in lithium-ion batteries and catalysts. Cobalt is mainly extracted as by-product of copper and nickel.A multiregional input-output (MRIO) model for 20 world regions and 163 commodities was built from the EXIOBASE v2.2.0 multiregional supply and use table with the commodity technology construct. This MRIO model was hybridized by disaggregating cobalt flows from the nonferrous metal sector. Future cobalt demand in different world regions from 2007 to 2050 was then estimated, assuming region-and sector-specific GDP growth, constant technology, and constant background import shares. A dynamic stock model of regional reserves for seven different types of copper, cobalt, and nickel resources, augmented with optimization-based region-specific mining capacity estimates, was used to determine future cobalt supply. The investment attractiveness index developed by the Fraser Institute specifically for mining industry entered the optimization routine as a measure of the regional attractiveness of mining.The baseline scenario shows no cobalt supply constraints over the considered time period 2007-2050, and recovering about 60 % of cobalt content of the copper and nickel ore flows would be sufficient to match global cobalt demand. When simulating a hypothetical sudden supply dropout in Africa during the period 2020-2035, we found that shortages in cobalt supply might occur in such scenarios.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.