Abstract:We review principles and trends in the use of semiconductor nanowires as gain media for stimulated emission and lasing. Semiconductor nanowires have recently been widely studied for use in integrated optoelectronic devices, such as light-emitting diodes (LEDs), solar cells, and transistors. Intensive research has also been conducted in the use of nanowires for subwavelength laser systems that take advantage of their quasione-dimensional (1D) nature, flexibility in material choice and combination, and intrinsic optoelectronic properties. First, we provide an overview on using quasi-1D nanowire systems to realize subwavelength lasers with efficient, directional, and low-threshold emission. We then describe the state of the art for nanowire lasers in terms of materials, geometry, and wavelength tunability. Next, we present the basics of lasing in semiconductor nanowires, define the key parameters for stimulated emission, and introduce the properties of nanowires. We then review advanced nanowire laser designs from the literature. Finally, we present interesting perspectives for low-threshold nanoscale light sources and optical interconnects. We intend to illustrate the potential of nanolasers in many applications, such as nanophotonic devices that integrate electronics and photonics for next-generation optoelectronic devices. For instance, these building blocks for nanoscale photonics can be used for data storage and biomedical applications when coupled to on-chip characterization tools. These nanoscale monochromatic laser light sources promise breakthroughs in nanophotonics, as they can operate at room temperature, can potentially be electrically driven, and can yield a better understanding of intrinsic nanomaterial properties and surface-state effects in lowdimensional semiconductor systems.

Some critical aspects of the anisotropic absorption and emission properties of quasi one-dimensional structures are reviewed in the context of III-V compound semiconductor nanowires. The unique optical and electronic properties of III-V nanowires stem from the combination of dielectric effects due to their large aspect ratio, and their specific crystallographic structure which can differ significantly from the bulk case. The growth conditions leading to single-crystal nanowires with either zinc blende or wurtzite phase are first presented. Dipole selection rules for interband transitions in common III-V compounds are then summarized for the two different phases, and corroborated by ab initio Density Functional Theory calculations of the oscillator strength. The optical anisotropy is discussed considering both the effect of refractive index mismatch between the nanowire and its surroundings and the polarization of the emitting dipoles set by the nanowire crystallographic structure and orientation. Finite Difference Time Domain simulations are finally employed to illustrate the influence of the emitting dipole orientation and the nanowire diameter on the distribution of radiation in the far-field. The importance of the correlation between structural and optoelectronic properties is highlighted in view of potential applications in future nanowire photonics.

New insights into understanding and controlling the intriguing phenomena of spontaneous merging (kissing) and the self-assembly of monolithic Y- and T-junctions is demonstrated in the metal-organic chemical vapor deposition growth of GaAs nanowires. High-resolution transmission electron microscopy for determining polar facets was coupled to electrostatic-mechanical modeling and position-controlled synthesis to identify nanowire diameter, length, and pitch, leading to junction formation. When nanowire patterns are designed so that the electrostatic energy resulting from the interaction of polar surfaces exceeds the mechanical energy required to bend the nanowires to the point of contact, their fusion can lead to the self-assembly of monolithic junctions. Understanding and controlling this phenomenon is a great asset for the realization of dense arrays of vertical nanowire devices and opens up new ways toward the large scale integration of nanowire quantum junctions or nanowire intracellular probes.

In this letter, we report the first experimental demonstration of microdisk resonators that are vertically coupled to their buried access waveguides on III-V semiconductor epitaxial structures using an original fabrication process. The here-proposed and validated three-dimensional integration scheme exploits selective lateral thermal oxidation of aluminiumrich AlGaAs layers. Compared with the previously reported processing techniques, this new scheme is simpler as it does not require any planarization or substrate transfer steps. As a proofof-principle demonstration of this approach, 250-µm diameter microdisk devices exhibiting quality factor reaching ∼8500 have been successfully fabricated.

In this Letter, we study a new kind of organic polymer waveguide numerically and experimentally by combining an ultrathin (10-50 nm) layer of compactly packed CdSe/ZnS core/shell colloidal quantum dots (QDs) sandwiched between two cladding poly(methyl methacrylate) (PMMA) layers. When a pumping laser beam is coupled into the waveguide edge, light is mostly confined around the QD layer, improving the efficiency of excitation. Moreover, the absence of losses in the claddings allows the propagation of the pumping laser beam along the entire waveguide length; hence, a high-intensity photoluminescence (PL) is produced. Furthermore, a novel fabrication technology is developed to pattern the PMMA into ridge structures by UV lithography in order to provide additional light confinement. The sandwich-type waveguide is analyzed in comparison to a similar one formed by a PMMA film homogeneously doped by the same QDs. A 100-fold enhancement in the waveguided PL is found for the sandwich-type case due to the higher concentration of QDs inside the waveguide.

A novel photonic structure formed by the monolithic integration of a vertical III-V nanowire on top of a L3 two-dimensional photonic crystal microcavity is proposed to enhance light emission from the nanowire. The impact on the nanowire spontaneous emission rate is evaluated by calculating the spontaneous emission factor β, and the material gain at threshold is used as a figure of merit of this vertical emitting nanolaser. An optimal design is identified for a GaAs nanowire geometry with r = 155 nm and L~1.1 μm, where minimum gain at threshold (gth~13×10³ cm⁻¹) and large spontaneous emission factor (β~0.3) are simultaneously achieved. Modification of the directivity of the L3 photonic crystal cavity via the band-folding principle is employed to further optimize the far-field radiation pattern and to increase the directivity of the device. These results lay the foundation for a new approach toward large-scale integration of vertical emitting nanolasers and may enable applications such as intra-chip optical interconnects.

No abstract

No abstract