Finding an inexpensive and scalable method for the mass production of memristors will be one of the key aspects for their implementation in end-user computing applications. Herein, we report pioneering research on the fabrication of laser-lithographed graphene oxide memristors. The devices have been surface-fabricated through a graphene oxide coating on a polyethylene terephthalate substrate followed by a localized laser-assisted photo-thermal partial reduction. When the laser fluence is appropriately tuned during the fabrication process, the devices present a characteristic pinched closed-loop in the current-voltage relation revealing the unique fingerprint of the memristive hysteresis. Combined structural and electrical experiments have been conducted to characterize the raw material and the devices that aim to establish a path for optimization. Electrical measurements have demonstrated a clear distinction between the resistive states, as well as stable memory performance, indicating the potential of laser-fabricated graphene oxide memristors in resistive switching applications.
We present a physics-based circuit-compatible model for double-gated two-dimensional semiconductor-based field-effect transistors, which provides explicit expressions for the drain current, terminal charges, and intrinsic capacitances. The drain current model is based on the drift-diffusion mechanism for the carrier transport and considers Fermi-Dirac statistics coupled with an appropriate field-effect approach. The terminal charge and intrinsic capacitance models are calculated adopting a Ward-Dutton linear charge partition scheme that guarantees charge conservation. It has been implemented in Verilog-A to make it compatible with standard circuit simulators. In order to benchmark the proposed modeling framework we also present experimental DC and high-frequency measurements of a purposely fabricated monolayer MoS 2 -FET showing excellent agreement between the model and the experiment and thus demonstrating the capabilities of the combined approach to predict the performance of 2DFETs.npj 2D Materials and Applications (2019) 3:47 ; https://doi.
Flexible electronics is one of the fundamental technologies for the development of electronic skin, implant wearables, or ubiquitous biosensing. In this context, graphene-derived materials have attracted great interest due to their unique properties to fulfill the demands of these applications. Here we report a simple one-step method for the fabrication of electrophysical electrodes based on the photothermal production of porous nanographene structures on the surface of flexible polyimide substrates. This approach constitutes an inexpensive alternative to the commercial medical electrodes, leading to a lower and much more stable skin–electrode contact resistance and providing comparable signal transduction. This technology has been framed inside the IoT paradigm through the development of a denoising and signal classification clustering algorithm suitable for its implementation in wearable devices. The experiments have shown promising achievements regarding noise reduction, increasing the crest factor ~3.7 dB, as well as for the over 90% heart rate-monitoring accuracy.
Graphene-based devices are planned to augment the functionality of Si and III-V based technology in radio-frequency (RF) electronics. The expectations in designing graphene field-effect transistors (GFETs) with enhanced RF performance have attracted significant experimental efforts, mainly concentrated on achieving high mobility samples. However, little attention has been paid, so far, to the role of the access regions in these devices. Here, we analyse in detail, via numerical simulations, how the GFET transfer response is severely impacted by these regions, showing that they play a significant role in the asymmetric saturated behaviour commonly observed in GFETs. We also investigate how the modulation of the access region conductivity (i.e., by the influence of a back gate) and the presence of imperfections in the graphene layer (e.g., charge puddles) affects the transfer response. The analysis is extended to assess the application of GFETs for RF applications, by evaluating their cut-off frequency.
In 1971, Prof. L. Chua theoretically introduced a new circuit element, which exhibited a different behavior from that displayed by any of the three known passive elements: the resistor, the capacitor or the inductor. This element was called memristor, since its behavior corresponded to a resistor with memory. Four decades later, the concept of mem-elements was extended to the other two circuit elements by the definition of the constitutive equations of both memcapacitors and meminductors. Since then, the non-linear and non-volatile properties of these devices have attracted the interest of many researches trying to develop a wide range of applications. However, the lack of solid-state implementations of memcapacitors and meminductors make it necessary to rely on circuit emulators for the use and investigation of these elements in practical implementations. On this basis, this review gathers the current main alternatives presented in the literature for the emulation of both memcapacitors and meminductors. Different circuit emulators have been thoroughly analyzed and compared in detail, providing a wide range of approaches that could be considered for the implementation of these devices in future designs.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.