No abstract

Developing polyols derived from natural sources and recycling materials attracts great interest for use in replacing petroleum-based polyols in polyurethane production. In this study, rigid polyurethane (PUR) foams with various isocyanate indices were obtained from polyols based on rapeseed oil and polyethylene terephthalate (RO/PET). The various properties of the prepared PUR foams were investigated, and the effect of the isocyanate index was evaluated. The closed-cell content and water absorption were not impacted by the change of the isocyanate index. The most significant effect of increasing the isocyanate index was on the dimensional stability of the resulting foams. This is due to the increased crosslink density, as evidenced by the increased formation of isocyanurate and increase of the glass transition temperature. Additionally, the influence on compression strength, modulus, and long-term thermal conductivity were evaluated and compared with reference PUR foams from commercially available polyols. Rigid PUR foams from RO/PET polyol were found to be competitive with reference materials and could be used as thermal insulation material.

No abstract

No abstract

Increasing demands and consumption of humankind make an increase in paper production, extending the accumulation of paper production wastes. Due to legislations pertaining to environmental pollution, it has become necessary to search for new areas where these wastes could be used. Some of the processes such as milling, purification, etc. of fillers in the production of building materials are expensive and their cost reduction is desirable; therefore, the objective of this research is to develop strong and multifunctional rigid polyurethane foam composites from bio‐based polyol that are filled with unpurified and high distribution in size, having paper waste sludge (PWS) particles, and to investigate the possibility to recycle them as filler in polyurethane composites. The rational amount of PWS particles is 5% by foam mass. PWS particles improve thermal conductivity, water vapor resistance, density, compressive strength, and modulus of elasticity as compared to neat polyurethane foam matrix. POLYM. COMPOS., 39:1852–1860, 2018. © 2016 Society of Plastics Engineers

Cellulose nanocrystals (CNC) obtained by acidic hydrolysis from microcrystalline cellulose were dispersed in a biopolyurethane matrix to prepare composite films. The polyurethane was prepared from a hydroxylated soybean oil (SO‐OH) and a polymeric diphenyldiisocyanate (pMDI), using a organotin compound as the catalyst. The composite films contained different concentrations of nanocelullose, without any macroscopic aggregates in all cases. Thermal, tensile and dynamic mechanical properties of the films were determined for all the samples. In particular, it was observed that the glass transition temperature of the nanocomposites slightly increased with the concentration of the cellulose nanocrystals. The nanocomposite with 1 wt% of nanocellulose showed the highest tensile strength of the series. POLYM. ENG. SCI., 58:125–132, 2018. © 2017 Society of Plastics Engineers

In this research, polyols from rapeseed oil and recycled poly(ethylene terephthalate) were synthesized by two-step continuous synthesis with a different rapeseed oil and poly(ethylene terephthalate) concentration. All rapeseed oil/poly(ethylene terephthalate) polyols showed complete compatibility with blowing agent Solkane 365/227. The resulting polyols were used to prepare rigid polyurethane foams which were characterized with various techniques for determination of their physical, mechanical and thermal insulation properties. The effect of rapeseed oil and poly(ethylene terephthalate) concentrations in polyols on the characteristics of rigid polyurethane foams was investigated. The results showed that obtained rigid polyurethane foams were suitable for thermal insulation appliance. Also, the potential use of rapeseed oil as raw material combined with poly(ethylene terephthalate) to synthesize polyols with good compatibility with blowing agent was confirmed.

No abstract