High-quality rigid polyurethane (PU) foam thermal insulation material has been developed solely using bio-polyols synthesized from second-generation bio-based feedstock. High functionality bio-polyols were synthesized from cellulose production side stream—tall oil fatty acids by oxirane ring-opening as well as esterification reactions with different polyfunctional alcohols, such as diethylene glycol, trimethylolpropane, triethanolamine, and diethanolamine. Four different high functionality bio-polyols were combined with bio-polyol obtained from tall oil esterification with triethanolamine to develop rigid PU foam formulations applicable as thermal insulation material. The developed formulations were optimized using response surface modeling to find optimal bio-polyol and physical blowing agent: c-pentane content. The optimized bio-based rigid PU foam formulations delivered comparable thermal insulation properties to the petro-chemical alternative.

Developing polyols derived from natural sources and recycling materials attracts great interest for use in replacing petroleum-based polyols in polyurethane production. In this study, rigid polyurethane (PUR) foams with various isocyanate indices were obtained from polyols based on rapeseed oil and polyethylene terephthalate (RO/PET). The various properties of the prepared PUR foams were investigated, and the effect of the isocyanate index was evaluated. The closed-cell content and water absorption were not impacted by the change of the isocyanate index. The most significant effect of increasing the isocyanate index was on the dimensional stability of the resulting foams. This is due to the increased crosslink density, as evidenced by the increased formation of isocyanurate and increase of the glass transition temperature. Additionally, the influence on compression strength, modulus, and long-term thermal conductivity were evaluated and compared with reference PUR foams from commercially available polyols. Rigid PUR foams from RO/PET polyol were found to be competitive with reference materials and could be used as thermal insulation material.

Bio/recycled polyols from rapeseed oil (RO) and poly(ethylene terephthalate) (PET) were prepared using a continuous, two-step synthesis method. The bio/recycled polyol properties were compared to RO and commercially available PET based polyols. Rigid polyurethane foams with a unified apparent density of 40-45 kg/m 3 were prepared from these polyols. The thermal conductivity, thermal properties, water absorption and mechanical properties of foams were tested. The results indicated that the RO/PET polyols can be successfully used for preparing polyurethane foams as energy efficient thermal insulation material.

No abstract

A second-generation bio-based feedstock—tall oil fatty acids—was epoxidised via two pathways. Oxirane rings were introduced into the fatty acid carbon backbone using a heterogeneous epoxidation catalyst-ion exchange resin Amberlite IR-120 H or enzyme catalyst Candida antarctica lipase B under the trade name Novozym® 435. High functionality bio-polyols were synthesised from the obtained epoxidated tall oil fatty acids by oxirane ring-opening and subsequent esterification reactions with different polyfunctional alcohols: trimethylolpropane and triethanolamine. The synthesised epoxidised tall oil fatty acids (ETOFA) were studied by proton nuclear magnetic resonance. The chemical structure of obtained polyols was studied by Fourier-transform infrared spectroscopy and size exclusion chromatography. Average molecular weight and polydispersity of polyols were determined from size exclusion chromatography data. The obtained polyols were used to develop rigid polyurethane (PU) foam thermal insulation material with an approximate density of 40 kg/m3. Thermal conductivity, apparent density and compression strength of the rigid PU foams were determined. The rigid PU foams obtained from polyols synthesised using Novozym® 435 catalyst had superior properties in comparison to rigid PU foams obtained from polyols synthesised using Amberlite IR-120 H. The developed rigid PU foams had an excellent thermal conductivity of 21.2–25.9 mW/(m·K).

Metastatic dissemination of the primary tumor is the major cause of death in colorectal cancer (CRC) patients. Multiple chromosomal breaks and chromothripsis, a phenomenon involving multiple chromosomal fragmentations occurring in a single catastrophic event, are associated with cancer genesis, progression and developing of metastases. The aim of this study was to evaluate the effect of chromothripsis and total breakpoint count (breakpoint instability index) on progression-free survival (PFS). A total of 19 patients with metastatic CRC (mCRC) receiving FOLFOX first-line palliative chemotherapy between August, 2011 and October, 2012 were selected for this study. The results indicated that the highest breakpoint count was observed in chromosomes 1, 2 and 6. Chromothripsis was detected in 52.6% of the study patients. Furthermore, chromothripsis was associated with an increased median PFS (mPFS; 14 vs. 8 months, respectively; P=0.03), but an association with overall survival was not identified. The present study demonstrated that chromothripsis affected CRC patient survival, suggesting a role for this event as a prognostic and predictive marker in mCRC treatment.

We would like to present a patient with a classical phenotype of a rare disorder - Cowden syndrome, its diagnostics and management challenges. A breast surgeon has to be aware of this rare condition when treating a patient with breast manifestations of Cowden syndrome and has to refer the patient to a clinical geneticist for further evaluation. Sequencing of the PTEN gene showed the Asp24Gly mutation. According to the latest literature data, the lifetime risk of breast cancer for Cowden syndrome patients is 81% and surgery is a justified option to reduce the risk of breast cancer. Bilateral risk-reducing mastectomy with immediate reconstruction was performed to eliminate further risk of breast cancer. 3 years after the risk-reducing breast surgery the patient is satisfied with the outcome. This is to our best knowledge the first reported Cowden syndrome case with follow-up data after risk-reducing measures have been taken.

BackgroundHereditary triple-negative breast cancer patients have better recurrence-free survival than triple-negative sporadic ones. High expression of some of the miRNAs is related to worse overall and disease-free survival of triple-negative breast cancer patients. The attempt to associate expression level of some miRNA in triple-negative hereditary and sporadic breast cancers to disease specific survival was performed in this study.Material and methodsStudy group was made of 18 triple-negative breast cancer patients harboring the BRCA1 gene mutations and 32 triple-negative sporadic breast cancer patients. Quantitative amount of mir-10b, mir-21, mir-29a, mir-31, and mir-214 by real-time PCR was assessed. The disease-specific survival in relation of high and low levels of some of the miRNAs was analyzed using Log-rank (Mantel-Cox) test.ResultsMiR-214 showed significantly higher expression level in sporadic tissues than in hereditary ones (p = 0.0005). Triple-negative breast cancer patients with high level of miR-214 showed significantly worse disease-specific survival than patients with low level (p = 0.0314).ConclusionsOur finding suggests that miR-214 possibly could be used as a potential prognostic biomarker for triple-negative breast cancer patients.Electronic supplementary materialThe online version of this article (doi:10.1186/s13053-015-0028-z) contains supplementary material, which is available to authorized users.