No abstract

No abstract

Among different organic fillers, the chemical composition of Syzygium aromaticum, commonly known as cloves, has great potential as a sustainable reinforcement for polymeric materials. In the study, grounded cloves were used as cellulosic filler for a novel polyurethane (PU) composite foams. Soybean oil-based PU composite foams were successfully reinforced with different concentrations (1, 2, and 5 wt%) of clove filler. PU foams were examined by rheological behavior, processing parameters, cellular structure (scanning electron microscopy analysis), mechanical properties (compression test, impact test, three-point bending test), thermal properties (thermogravimetric analysis), viscoelastic behavior (dynamic mechanical analysis) as well as selected application properties (apparent density, dimensional stability, surface hydrophobicity, water absorption, color characteristic). In order to undertake the disc diffusion method, all PU composites were tested against selected bacteria (Escherichia coli and Staphylococcus aureus). Based on the results, it can be concluded that the addition of 1 and 2 wt% of clove filler leads to PU composite foams with improved compression strength (improvement by ≈18% for sample PU-1), greater flexural strength (increase of ≈11%), and improved impact strength (increase of ≈8%). Moreover, it has been proved that clove filler may be used as a natural anti-aging compound for polymeric materials. Based on the antibacterial results, it has been shown that the addition of clove filler significantly improved the antibacterial properties of PU foams and is suitable for the manufacturing of antimicrobial PU composite foams. Due to these positive and beneficial effects, it can be stated that the use of cloves as a natural filler in PU composite foams can promote a new application path in converting agricultural waste into useful resources for creating a new class of green materials.

No abstract

This study aimed to examine rigid polyurethane (PUR) foam properties that were synthesized from walnut shells (WS)-based polyol. The Fourier Transform Infrared Spectroscopy (FTIR) results revealed that the liquefaction of walnut shells was successfully performed. The three types of polyurethane (PUR) foams were synthesized by replacement of 10, 20, and 30 wt% of a petrochemical polyol with WS-based polyol. The impact of WS-based polyol on the cellular morphology, mechanical, thermal, and insulating characteristics of PUR foams was examined. The produced PUR foams had apparent densities from 37 to 39 kg m−3, depending on the weight ratio of WS-based polyol. PUR foams that were obtained from WS-based polyol exhibited improved mechanical characteristics when compared with PUR foams that were derived from the petrochemical polyol. PUR foams produced from WS-based polyol showed compressive strength from 255 to 310 kPa, flexural strength from 420 to 458 kPa, and impact strength from 340 to 368 kPa. The foams that were produced from WS-based polyol exhibited less uniform cell structure than foams derived from the petrochemical polyol. The thermal conductivity of the PUR foams ranged between 0.026 and 0.032 W m−1K−1, depending on the concentration of WS-based polyol. The addition of WS-based polyol had no significant influence on the thermal degradation characteristics of PUR foams. The maximum temperature of thermal decomposition was observed for PUR foams with the highest loading of WS-based polyol.