Seed enhancements may be defined as post-harvest treatments that improve germination or seedling growth, or facilitate the delivery of seeds and other materials required at the time of sowing. This definition includes three general areas of enhancements: pre-sowing hydration treatments (priming), coating technologies and seed conditioning. Pre-sowing hydration treatments include non-controlled water uptake systems (methods in which water is freely available and not restricted by the environment) and controlled systems (methods that regulate seed moisture content preventing the completion of germination). Three techniques are used for controlled water uptake: priming with solutions or with solid particulate systems or by controlled hydration with water. These priming techniques will be discussed in this paper with reference to methodology, protocol optimization, drying and storage. Coating technologies include pelleting and film coating, and coatings may serve as delivery systems. Seed conditioning equipment upgrades seed quality by physical criteria. Integration of these methods can be performed, and a system is described to upgrade seed quality in Brassica that combines hydration, coating and conditioning. Upgrading is achieved by detecting sinapine leakage from nonviable seeds in a coating material surrounding the seeds. Seed-coat permeability directly influences leakage rate, and seeds of many species have a semipermeable layer. The semipermeable layer restricts solute diffusion through the seed coat, while water movement is not impeded. Opportunities for future seed enhancement research and development are highlighted.

The objective of modern seed-coating technology is to uniformly apply a wide range of active components (ingredients) onto crop seeds at desired dosages so as to facilitate sowing and enhance crop performance. There are three major types of seed treating/coating equipment: dry powder applicator, rotary pan, and pelleting pan with the provisions to apply dry powders, liquids, or a combination of both. Additional terms for coatings produced from these types of equipment include dry coating, seed dressing, film coating, encrustments, and seed pelleting. The seed weight increases for these different coating methods ranges from <0.05% to >5000% (>100,000-fold range). Modern coating technology provides a delivery system for many other materials including biostimulants, nutrients, and plant protectants. This review summarizes seed coating technologies and their potential benefits to enhance seed performance, improve crop establishment, and provide early season pest management for sustainable agricultural systems.

No abstract

No abstract

Conventional methods to control the onion maggot or onion fly, Delia antiqua (Meigen), have relied on in-furrow applications of the toxicant pesticide, chlorpyrifos. The objective of this research was to develop an onion (Allium cepa L.) seed treatment that utilizes a new chemistry compound that is environmentally safe. Cyromazine is an insect growth regulator with a mode of action different from traditional pesticides used to control onion maggot. Cyromazine has low mammalian toxicity and is relatively nontoxic to other insects, including beneficials. High seed loading rates (50 g·kg-1 active ingredient) are required for optimal efficacy, and conventional slurry methods are inadequate to apply these high loading rates. Film coating and pelleting were performed at Cornell Univ. to apply cyromazine and a registered fungicide (a formulation of thiram and carboxin) to onion seeds. Results of field studies performed over several years revealed that stand losses due to the onion maggot ranged from ≈20% to 60%. Cyromazine applied by either film coating or pelleting decreased the loss by onion maggot from 1% to 8%, and efficacy was comparable to an in-furrow application of chlorpyrifos. Cyromazine was registered as a seed treatment and is commercially used in the northeastern and midwestern United States, where onion maggot is a serious pest. Field emergence was not negatively affected by cyromazine coated onto the seeds when onion seeds are sown in organic (muck) soils. There is other evidence, however, that cyromazine seed treatments may cause phytotoxicity to germination and seedling growth. Testing seed quality in sand or on roll towels revealed a high percentage of abnormal seedlings. Retarded root growth was observed in seeds treated with cyromazine, resulting in an increase in abnormal seedling classifications. A finely ground sphagnum peatmoss applied over the seeds in a roll towel test ameliorated the abnormal root growth symptoms, and seedlings had robust growth. Collectively, film coating and pelleting were effective delivery systems for the application of plant protectants required at time of sowing. Modification of the standard germination test was needed to accurately assess onion seed quality. Moreover, this project was successful due to a team effort of a university seed scientist and entomologists working with onion growers and industry. Future registrations on small acreage, high-value horticultural crops are envisioned to require similar multi-partner approaches. Chemical name used: N-cyclopropyl-1,3,5-triazine-2,4,6-triamine (cyromazine).

No abstract

This research presents a novel method of using plant-derived protein hydrolysates as seed coating materials. The objective of this study was to develop seed coating formulations using soy flour, a sustainable, inexpensive, and green source, as a biostimulant using broccoli as the model system. A 10% suspension of soy flour was used as the seed treatment binder in all coatings. The solid particulate filler was composed of mixtures of soy flour, cellulose, and diatomaceous earth, together termed as SCD. All SCD components were homogenized in water, then dried and ground to a fine particle size <106 µm. The SCD coatings were applied with rotary pan seed coating equipment at 25% of the seed weight. Increasing the proportion of soy flour increased the seed coating strength and also the time for the coating to disintegrate after soaking in water. As a result, the seed coatings reduced the percentage germination and the germination rate compared with the nontreated control. However, the 10-day-old seedling root and shoot growth showed significant improvement for all SCD coating treatments compared with controls. Plant growth and development was also measured after 30 days in the greenhouse. Fresh weight (FW) and dry weight (DW), leaf area, plant height, leaf development, Soil-Plant Analyses Development (SPAD) index (chlorophyll measurement), and nitrogen (N) per plant were all greater from coatings with 30%, 40%, and 50% soy flour than the noncoated control. Nitrogen, from the soy flour applied in the seed coatings, ranged from 0.024 to 0.073 mg per seed, while the enhanced N per plant ranged from 1.7 to 8.5 mg. The coating treatment with 0.063 mg N per seed resulted in the greatest plant leaf area and highest N content. Nitrogen applied in the seed coating only accounted for 1% to 2% of the enhanced N in the plants, indicating the soy flour acted as a biostimulant rather than a fertilizer.

No abstract