We report a new efficient method for fabricating a superhydrophobic oxidized surface of aluminum alloys with enhanced resistance to pitting corrosion in sodium chloride solutions. The developed coatings are considered very prospective materials for the automotive industry, shipbuilding, aviation, construction, and medicine. The method is based on nanosecond laser treatment of the surface followed by chemisorption of a hydrophobic agent to achieve the superhydrophobic state of the alloy surface. We have shown that the surface texturing used to fabricate multimodal roughness of the surface may be simultaneously used for modifying the physicochemical properties of the thick surface layer of the substrate itself. Electrochemical and wetting experiments demonstrated that the superhydrophobic state of the metal surface inhibits corrosion processes in chloride solutions for a few days. However, during long-term contact of a superhydrophobic coating with a solution, the wetted area of the coating is subjected to corrosion processes due to the formation of defects. In contrast, the combination of an oxide layer with good barrier properties and the superhydrophobic state of the coating provides remarkable corrosion resistance. The mechanisms for enhancing corrosion protective properties are discussed.

No abstract

No abstract

A strategy, combining laser chemical modification with laser texturing, followed by chemisorption of the fluorinated hydrophobic agent was used to fabricate the series of superhydrophobic coatings on an aluminum alloy with varied chemical compositions and parameters of texture. It was shown that high content of aluminum oxynitride and aluminum oxide formed in the surface layer upon laser treatment allows solving the problem of enhancement of superhydrophobic coating resistance to abrasive loads. Besides, the multimodal structure of highly porous surface layer leads to self-healing ability of fabricated coatings. Long-term behavior of designed coatings in "hard" hot water with an essential content of calcium carbonate demonstrated high antiscaling resistance with self-cleaning potential against solid deposits onto the superhydrophobic surfaces. Study of corrosion protection properties and the behavior of coatings at long-term contact with 0.5 M NaCl solution indicated extremely high chemical stability and remarkable anticorrosion properties.

No abstract

No abstract

A method based on nanosecond laser processing was used to design superhydrophilic and superhydrophobic copper substrates. Three different protocols were used to analyze the evolution of the bactericidal activity of the copper substrates with different wettability. Scanning electron microscopy was used to study the variation of cell morphology after the attachment to superhydrophilic and superhydrophobic surfaces. The dispersions of Escherichia coli K12 C600 and Klebsiella pneumoniae 811 in Luria Bertani broth in contact with the superhydrophilic copper surface showed enhanced bacterial inactivation, associated with toxic action of both hierarchically textured copper surface and high content of Cu2+ ions in the dispersion medium. In contrast, the bacterial dispersions in contact with the superhydrophobic copper substrates demonstrated an increase in cell concentration with time until the development of corrosion processes. The resistance of bacterial cells to contact the copper substrates is discussed on the basis of surface forces, determining the primary adhesion and of the protective action of a superhydrophobic state of the surface against electrochemical and biological corrosion.

No abstract