No abstract

An increasing number of studies directed at supercooling water droplets on surfaces with different wettabilities have appeared in recent years. This activity has been stimulated by the recognition that water supercooling phenomena can be effectively used to develop methods for protecting outdoor equipment and infrastructure elements against icing and snow accretion. In this article, we discuss the nucleation kinetics of supercooled sessile water droplets on hydrophilic, hydrophobic, and superhydrophobic surfaces under isothermal conditions at temperatures of -8, -10, and -15 °C and a saturated water vapor atmosphere. The statistics of nucleation events for the ensembles of freezing sessile droplets is completed by the detailed analysis of the contact angle temperature dependence and freezing of individual droplets in a saturated vapor atmosphere. We have demonstrated that the most essential freezing delay is characteristic of the superhydrophobic coating on aluminum, with the texture resistant to contact with ice and water. This delay can reach many hours at T = -8 °C and a few minutes at -23 °C. The observed behavior is analyzed on the basis of different nucleation mechanisms. The dissimilarity in the total nucleation rate, detected for two superhydrophobic substrates having the same apparent contact angle of the water drop but different resistivities of surface texture to the contact with water/ice, is associated with the contribution of heterogeneous nucleation on external centers located at the water droplet/air interface.

In this work, we present a modification of a stainless steel surface to impart superhydrophobic properties to it that are robust with respect to mechanical stresses associated with cyclic icing/deicing treatment, as well as to long-term contact with aqueous media and high humidity. The durability of the superhydrophobic state is ensured by the texture with multimodal roughness stable against mechanical stresses and a 2D polymer network of fluorooxysilane chemically bound to the texture elements. The designed superhydrophobic coating is characterized by contact angles exceeding 155° and a maximum rolling angle of 42° after 100 icing/deicing cycles.

Superhydrophobic surfaces are attractive as self-cleaning protective coatings in harsh environments with extreme temperatures and pH levels. Hexagonal phase boron nitride (h-BN) films are promising protective coatings due to their extraordinary chemical and thermal stability. However, their high surface energy makes them hydrophilic and thus not applicable as water repelling coatings. Our recent discovery on the superhydrophobicity of boron nitride nanotubes (BNNTs) is thus contradicting with the fact that BN materials would not be hydrophobic. To resolve this contradiction, we have investigated BNNT coatings by time-dependent contact angle measurement, thermogravimetry, IR spectroscopy, and electron microscopy. We found that the wettability of BNNTs is determined by the packing density, orientation, length of nanotubes, and the environmental condition. The origins of superhydrophobicity of these BNNT coatings are identified as (1) surface morphology and (2) hydrocarbon adsorbates on BNNTs. Hydrocarbon molecules adsorb spontaneously on the curved surfaces of nanotubes more intensively than on flat surfaces of BN films. This means the surface energy of BNNTs was enhanced by their large curvatures and thus increased the affinity of BNNTs to adsorb airborne molecules, which in turn would reduce the surface energy of BNNTs and make them hydrophobic. Our study revealed that both high-temperature and UV-ozone treatments can remove these adsorbates and lead to restitution of hydrophilic BN surface. However, nanotubes have a unique capability in building a hydrophobic layer of adsorbates after a few hours of exposure to ambient air.

No abstract