Validation of Individual Computerized Sow Feeding Systems in Lactation

Abstract

Two experiments evaluated the accuracy of individual computerized feed delivery systems for lactating sows (GESTAL Solo, JYGA Technologies Inc., St-Lambert-de-Lauzon, Quebec, Canada). The feeders volumetrically dispense feed based on rotations of a screw auger. In Experiment 1, 29 prototype feeders were used across 3 farrowing groups. On d 0, 1 feeder was selected to calibrate the computer system to the bulk density of the lactation diet. Feeders were programmed for 5 feeding periods per day with feeding period allowing up to 4 feed drops triggered by the sow. Sows activate a trigger within the feed bowl to receive a targeted amount of feed (1.5 lb) and the computerized feeder records the delivery amount based on calibration values. In addition, total lactation feed intake was recorded by weighing the quantity of feed provided to the feeding system for each sow throughout lactation. Feed delivered by a single trigger activation on d 0, d 10, and d of weaning was collected and weighed with a scale and compared to the computer record. Additionally, total feed delivered over the lactation period was compared between the recorded computer measurement and scale weight. Average percentage difference between the two measurements ranged from 0.01 to 36.6% for a single trigger event. Computer-recorded total lactation feed intake was marginally less (P < 0.089) than the actual weight of feed delivered (230.3 vs. 239.9 lb; SEM 5.43). Individual feeders had recorded total feed delivery ranging from 77 to 122% of actual weight delivered. Based on these results, a new feeder design, identical to the commercially marketed GESTAL Solo (plastic hopper manufactured with injection mold instead of rotational mold), was tested in Experiment 2. In Experiment 2, 29 feeders were used in a single farrowing group to evaluate the new sow feeders. Feeders were calibrated and data were collected using the same procedures as Experiment 1, except individual feed drops were collected 8 times per feeder throughout lactation. Average percentage difference across all feeders ranged from 3.8 to 13.4%. There was no evidence (P < 0.542) of difference between the computer-recorded total lactation feed and actual weight of feed delivered (279.6 vs. 272.8 lb; SEM 4.03). Individual feeders had recorded total feed delivery ranging from 90.4 to 106.4% of actual weight delivered. Overall, this study shows the new feeder model was less variable in feed drops and total feed delivery than the old prototype. http://newprairiepress.org/kaesrr/vol3/iss7/6 Swine Day 2017 K A N S A S STAT E UNI VE R S IT Y 2017Kansas State University Agricultural Experiment Station and Cooperative Extension Service SummaryTwo experiments evaluated the accuracy of individual computerized feed delivery systems for lactating sows (GESTAL Solo, JYGA Technologies Inc., St-Lambert-de-Lauzon, Quebec, Canada). The feeders volumetrically dispense feed based on rotations of a screw auger. In Experiment 1, 29 prototype feeders were used across 3 farrowing groups. On d 0, 1 feeder wa...

Evaluation of three different patterns of feed intake during early lactation in lactating sows

“…Sufficient feed intake of sows during the lactation period is critical in maintaining the body condition of sows, maximizing their productivity in terms of milk production, and improving the performance of litters (Eissen, Apeldoorn, Kanis, Verstegan, & de Greef, ; Nichols et al., ). Beyer et al.…”